JN0-643 Question #200: Real Exam Question with Answer & Explanation

You are using an IBGP route reflector within your network. Your route reflector has received the 2001:1:2::/64 prefix, but it is not advertising the prefix to its cluster members. After examining the route reflector, you notice the output shown in the exhibit. user@router> show bgp summary Groups: 1 Peers: 3 Down peers: 0 Table Tot Paths Act Paths Suppressed History Damp State Pending inet.0 0 0 0 0 0 0 inet6.0 1 0 0 0 0 0 Peer AS InPkt OutPkt OutQ Flaps Last Up/Dwn State|#Active/Received/Accepted/Damped... 2001:ffff::3:3 65550 43 43 0 0 18:20 Establ inet6.0: 0/1/1/0 2001:ffff::3:4 65550 42 43 0 0 18:16 Establ inet6.0: 0/0/0/0 2001:ffff::9:7 65550 42 43 0 0 18:00 Establ inet6.0: 0/0/0/0 user@router> show route receive-protocol bgp 2001:ffff::3:3 inet.0: 32 destinations, 33 routes (32 active, 0 holddown, 0 hidden) juniper_private1.inet.0: 4 destinations, 4 routes (2 active, 0 holddown, 2 hidden) iso.0: 1 destinations, 1 routes (1 active, 0 holddown, 0 hidden) mpls.0: 3 destinations, 3 routes (3 active, 0 holddown, 0 hidden) inet6.0: 10 destinations, 14 routes (10 active, 0 holddown, 0 hidden) Prefix Nexthop MED Lclpref AS path 2001:1:2::/64 2001:ffff::3:3 100 I user@router> show route 2001:1:2:: inet6.0: 10 destinations, 14 routes (10 active, 0 holddown, 0 hidden) + = Active Route, - = Last Active, * = Both 2001:1:2::/64 *[OSPF3/10] 01:54:11, metric 201 > to fe80::217:cb03:2448:bd00 via fe-0/0/1.804 [BGP/170] 00:18:43, localpref 100, from 2001:ffff::3:3 AS path: I > to fe80::217:cb03:2448:bd00 via fe-0/0/1.804 user@router> show route advertising-protocol bgp 2001:ffff::9:7 user@router> show configuration protocols bgp group ibgpv6 { type internal; local-address 2001:ffff::3:5; cluster 10.0.3.4; neighbor 2001:ffff::3:3; neighbor 2001:ffff::3:4; neighbor 2001:ffff::9:7; } user@router> Which configuration statement causes the route reflector to transmit the route to its IBGP peers?