HPE7-A07 · Question #60

Refer to the exhibits. Which statement is true given the following CLI output from a CX 6300?

The correct answer is B. A wired client with IP address 10.203 1.100 is on a remote CX 6300 in the fabric with loopback IP. The CLI output provided shows routing information from a CX 6300 switch. The output under default" shows various IP routes, including a route for 10.203.1.100/32 with a next hop of 172.21.11.2. This indicates that the route to the client with IP address 10.203.1.100 is known in…

Troubleshooting and Optimization of Campus Mobility

Question

Exhibit

Options

AThere are no active fabric clients on the CX switch with RD 172.16.10.1
BA wired client with IP address 10.203 1.100 is on a remote CX 6300 in the fabric with loopback IP
CA wired client with IP address 10 203 1 100 has a host route that is not being properly advertised
DThe overlay loopbacK addresses are advertised in the faerie with 2d-bit subnet masks

How the community answered

(57 responses)

A
7% (4)
B
79% (45)
C
4% (2)
D
11% (6)

Explanation

The CLI output provided shows routing information from a CX 6300 switch. The output under default" shows various IP routes, including a route for 10.203.1.100/32 with a next hop of 172.21.11.2. This indicates that the route to the client with IP address 10.203.1.100 is known in the network and is reachable via another device in the fabric, which has the loopback IP address 172.21.11.2. Since the route is present in the routing table, it means that the client is known and active within the fabric network.

Topics

#EVPN fabric#CX switch CLI#overlay routing#fabric clients

Community Discussion

No community discussion yet for this question.

Full HPE7-A07 Practice