HPE6-A41 Exam Questions

A network administrator configures OSPF in a network with ArubaOS switches. The administrator is concerned that a rogue device might connect to an access port on the switches and i...

The administrator has copied new software to an ArubaOS switch and placed this software in the secondary flash location. The switch is currently booting from the primary location....

Which security benefits does SNMPv3 offer that SNMPv2 does not offer?

A network administrator wants to know which device, type, and manufacturer is connected to port 10 on an Aruba 3810 switch. Which command could provide this information?

What benefit does Aruba Clarity in Aruba AirWave provide?

A Virtual Switching Framework (VSF) fabric currently has two members and two physical 10GbE links in its VSF link. Which administrative task can a network administrator perform on...

Based on the topology shown in the exhibit, which symptom does a network administrator see if the ArubaOS switches are in their factory default states?

PC1 cannot reach PC2. Based on the exhibits, what could be the cause of this issue?

What does the traceroute command that is entered on an ArubaOS switch identify?

Switch 1 shown in the exhibit is an ArubaOS switch that has an uplink to the network core on interface 25. The network administrator wants to add a link on interface 26. The admini...

An ArubaOS switch is protected with a manager password. The network administrator wants to back up the configuration and apply it to other switches. The administrator wants the man...

A manager password is configured on an ArubaOS switch. The network administrator wants to ensure managers only use SSH to connect to the ArubaOS switch CLI. Which command must the...

Which issue could cause the Blocked status on A2?

A VSF fabric has two ArubaOS switches, Switch1 and Switch2. Switch1 will be the commander for a new Virtual Switching Framework (VSF) fabric. Switch2 is a new switch that will be t...

A network administrator wants to set up a link aggregation between two switches, as shown in the exhibit. The link aggregation must meet these requirements: - Protects against misc...

The switches in the exhibit are all ArubaOS switches that run MSTP. The network administrator wants all of the switch-to-switch links shown in the exhibit to be available for forwa...

A network administrator wants to deploy Aruba Instant APs (IAPs) at a remote site that does not have Internet access. The APs should receive their configuration information as a ZT...

A network administrator wants to disable physical interfaces 13-24 on an ArubaOS switch. How can the administrator do this?

Which technology can provide automated network optimization for unified communication applications such as Skype for Business?

A network administrator needs to set up a static LACP link aggregation. How should the administrator configure the VLAN settings for the link aggregation?

A network administrator enters this command on an ArubaOS switch with IP routing enabled: `ip route 0.0.0.0/0 10.1.1.1 metric 10 distance 10` What is the effect?

The network administrator is the commander of a Virtual Switching Framework (VSF) fabric. A power distribution causes member 1 to go down. Now the network administrator wants to re...

A network administrator wants to use the VLANs supported on one ArubaOS switch interface and if those VLANs have tagged or untagged assignments. What should the administrator do to...

Refer to the exhibit. The link between Core-1 and Core-2 shown in the exhibit fails, and some users lose connectivity. What should the network administrator do to prevent this issu...

A network administrator wants to place desktops connected to an ArubaOS switch in VLAN5. The desktops have no awareness of VLANs. How should the administrator assign desktops to th...

A network administrator connects an Aruba Instant AP (IAP) to an ArubaOS switch but cannot connect the AP to the Instant cluster that exists. The administrator wants to check the I...

A network administrator wants to form a cluster with several Aruba Instant APs. What is required to achieve this goal?

Refer to the exhibits. A network administrator uses RSTP, as shown in the exhibits. The network administrator wants switches to use the link that connects to Core-2 to forward some...

Refer to the exhibit. Prior to implementing OSPF on the network, an ArubaOS switch had the IP routing table shown in the exhibit. The network administrator then sets up OSPF in the...

A network administrator uses the console to access an ArubaOS core switch and wants to find the management IP address of another ArubaOS switch that is currently connected to port...

What is the use of the show arp command

An IRF has an ArubaOS switch did not receive any BDPUs and has the spanning tree auto-edge setting. What describes the effect of this setting?

The Student A client needs to connect to FTP Server B. Student A sends the necessary ARP request and receives a reply. Which destination MAC address does the Student A client use i...

What is a requirement for links to successfully participate in an aggregated link?

An Aruba switch which provides PoE+ to several Aruba APs. Users might also connect PoE devices to this switch. In a situation where the switch PoE capacity is exceeded, the network...

What is a valid setup for a Virtual Switching Framework (VSF) fabric?

A network administrator wants to download a configuration from an ArubaOS switch. The administrator does not have local access to the switch and wants to copy the configuration in...

A network administrator needs to complete the initial setup on an ArubaOS switch with the use of remote access. How can the network administrator do this?

Refer to the exhibits. A network administrator wants to create a backup IP route to 10.1.20.0/24 on Switch-1. The backup route should use Link2, and it should only be used if Link1...

Which technology enables a network administrator to group users by logical function instead of physical location, reduce bandwidth waste by limiting broadcast traffic, and improve...

Refer to the exhibit. Assume that Student A's ARP table is empty. Student A prepares to send an FTP packet to FTP Server B and needs to discover the proper destination MAC address....

A network administrator enters this command in an ArubaOS switch CLI: Switch(config)# ip route 0.0.0.0/0 The CLI shows this error: Incomplete input: 0.0.0.0/0 How can the administr...

Refer to the exhibit. Prior to implementing OSPF on one network, an ArubaOS switch had the IP routing table shown in the exhibit. The network administrator then sets up OSPF in the...

Which configuration setting for an ArubaOS switch must be deleted from a physical interface before it can be associated with a Virtual Switching Framework (VSF) link?

Refer to the exhibit. Based on the output shown in this exhibit, which statement is true about the 10.0.0.2 neighbor?

A network administrator plans two interfaces for a Virtual Switching Framework (VSF) link. Which best practice should the administrator follow?

A company wants a modular switch for the core layer of its mid-sized campus. The switch requires 32 10 G ports in a single switch with the ability to scale in the future. Which Aru...

A network administrator implements a wireless network that uses three wireless APs. The administrator wants to ensure that users can roam seamlessly from one AP to another. Which t...

Which ArubaOS switch feature treats multiple ports as one logical port?

A network administrator creates a local user account and assigns that account to the Level-9 authorization group. The administrator tests the group assignment and sees that the use...