HPE6-A41 Exam Questions

Which links can be combined in the same link aggregation?

Which privilege level would a network administrator use to configure an ArubaOS switch?

The network administrator enters this command: `Switch# reload`. Which software and configuration file will load?

The administrator successfully pings Device 1 at 10.1.1.100.42 from Switch-2. However, Device 2 cannot ping Device 1. The administrator can ping Device 2 from Switch-2 at 10.1.101....

What should the network administrator do to permit Switch-1 to route traffic from a client in 10.1.11.0/24 to a client in 10.1.12.0/24?

How many operating system image files can a network administrator load on an ArubaOS switch?

Originally, all four switches had the same region configuration. VLAN 14 was added to Switch_D and then mapped to Instance 2. How does this affect the MSTP topology?

The network administrator wants to place contractor clients and employee clients in different broadcast domains. How should the administrator achieve this goal?

Where should the network administrator configure an IP helper address of 10.1.1.10?

What is the relationship between a wireless client's data rate and the throughput for the client's traffic?

The network consists of two ArubaOS switches with routing disabled. How should the network administrator configure the link between Switch A and Switch B to ensure that all hosts c...

An administrator manages five ArubaOS switches that are already configured to support the network. The company now wants to use Aruba AirWave to manage the switches. The network ad...

Refer to the exhibit. A company has an existing Aruba Instant cluster with several Instant APs (IAPs), as shown in the exhibit. The network administrator orders a new IAP and boots...

An administrator configures MSTP on an ArubaOS switch. The administrator wants to ensure that this switch is always the root for instance 1. What should the administrator do to acc...

A company needs a quick way to deploy network infrastructure to new sites. Which Aruba solutions provide Zero Touch Provisioning (ZTP) for Aruba Instant APs (IAPs) and ArubaOS swit...

Refer to the exhibit. Spanning tree runs on the switches shown in the exhibit. The network administrator enters these commands: Switch-1 (config)# spanning-tree priority 0 Switch-2...

Managers log in to an ArubaOS switch with SSH. What does SSH require to authenticate the switch to the SSH client and set up a secure session?

The network administrator needs to configure a link aggregation on an ArubaOS switch. For which type of link aggregation is the administrator required to enter the lacp command in...

Refer to the exhibit. Spanning tree runs on the switches shown in the exhibit. The network administrator enters these two commands: Switch-1 (config)# spanning-tree priority 0 Swit...

Refer to the exhibit. The network administrator enters this command: Switch(config)#ip route 172.16.2.0/30 192.168.1.100 metric 1 distance 1 Why does this route fail to appear in t...

Which devices can communicate with each other at Layer 2?

The routing configuration must support this behavior. Server 1 and Server 2 communicate directly when Link 1 is up. If Link 1 fails, Server 1 and Server 2 can continue to communica...

A network administrator plans to set up a WLAN on an Aruba Instant cluster. The WLAN uses WPA/WPA2 Enterprise security. The administrator wants no authenticate users locally on the...

How does a switch treat a link aggregation?

A network administrator needs to configure a static route. What should the administrator use as the next hop address?

A network administrator just received two switches and wants to use the plug-and-play method to establish a Virtual Switching Framework (VSF) fabric with the fewest stops possible....

Assume that Switch-2 is correctly configured for OSPF. Which additional step must the administrator take to enable Switch-1 to advertise 192.168.2.0/24 to Switch-2?

Which type of 802.11 wireless network can be hosted by an endpoint device such as a laptop?

What is one benefit that Aruba AirWave can provide to a customer with ArubaOS switches?

An ArubaOS switch operates at its factory default settings. A network administrator connects the switch to a VLAN with a DHCP server. The switch-to-switch connection carries untagg...

Refer to the exhibit. A network administrator views the configuration files on an ArubaOS switch and sees the output in the exhibit. The administrator enters this command: show run...

For which task does a network administrator need access to enable the context on an ArubaOS switch?

A network administrator prepares an ArubaOS switch to be monitored and managed by AirWave. Which credentials are required for AirWave to change configuration settings on the switch...

A company has an Aruba 5400R switch, switch 1, at the network core of its campus. This switch routes all traffic for the campus and is the RSTP root. The company wants to add anoth...

Which settings should match on physical interfaces before a network combines them in a link aggregation?

Two switches are members of a Virtual Switching Framework (VSF) fabric. Which statement correctly describes how the switches handle routing?

A server connects to a port on an ArubaOS switch. The network administrator wants to ensure that the port remains forwarding during MSTP topology changes, even though VSF-port s/he...

Refer to the exhibit. EndpointA sends broadcast ARP requests. Where are these requests received?

A network administrator wants to be able to access an Aruba Instant cluster at the same IP address even if the current master fails. How can the administrator achieve this goal?

An administrator discovers and then authorizes several ArubaOS switches in Aruba AirWave. Immediately after the administrator authorizes the switches, AirWave cannot communicate wi...

A company has a single routing protocol environment. What is one reason to use OSPF routing instead of static routing?

A network administrator installs a new aggregation and access layer in a campus network. All users in this area belong to the same VLAN. The administrator plugs the switches into t...

The administrator is in this context in an ArubaOS switch CLI: Switch (vlan10)# The administrator wants to leave the configuration context with a single command/ Which command shou...

Refer to the exhibit. MSTP is implemented in the topology shown in the exhibit, and all the switches are in the same region. The network administrator does not want to use the Inte...

Refer to the exhibit. Based on the exhibit, what is the problem?

How many MSTP regions exist in the topology shown in the exhibit?

An ArubaOS switch operates at factory default settings. A network administrator enters this command: Switch (config)# password operator plaintext mysecret How does the switch now c...

A Virtual Switching Framework (VSF) fabric is configured to use LLDP-MAD. Which action does the standby member take if it sends a probe but receives no response?

Device 1 needs to send traffic to Device 2, and it sends an ARP request in preparation. Which devices will receive this ARP request?

A network administrator needs to set up DHCP relay in a switched network comprised of ArubaOS switches. Switch A and Switch B have the IP settings in Exhibit 1. Switch A and Switch...