HPE0-S51 Exam Questions

A customer needs to update firmware and perform diagnostic tests on various components of a HPE ProLiant server. Which utility should they use?

A customer plans to use HPE ProLiant servers for an application that requires low latency for all components. Which workload profile should the customer use?

A customer requires a storage platform for their department dat

A customer is building out their rack of servers and storage systems. They need a high-performance network with a simple, centralized management capability and deep buffer support...

A customer requires a software-defined storage solution. Which storage solution meets the customer's needs?

You are installing HPE ProLiant servers into a rack that will be fully loaded. You also need to install four power distribution units (PDUs) in the rack. How should you install the...

Which methods can you use to configure HPE ProLiant servers? (Choose three.)

A customer needs a Layer 2 switch that provides basic switch functionality without the need to use a CLI or a GUI. Which type of switch meets the customer's needs?

A Nimble storage customer is experiencing rapid data growth and needs to scale their storage resources. Which action should the customer take first?

Which statement is true regarding the drives in an internal controller on a HPE ProLiant server?

You are designing a system for a customer that has a contract with a government agency. The contract requires the highest level of security algorithms possible. Which HPE ProLiant...

You plan to install an HPE ProLiant DL360 Gen10 in an environment with an ambient temperature of 45 °C (113 °F). Which additional option is required?

You are installing additional components to a server. Which HPE resource provides Quickspecs that verify the compatibility of the server hardware with the server?

You are upgrading firmware on two SN6000 switches in a fabric with a CLI connection. You did not wait for the upgrade to be activated on the first switch before beginning to instal...

Which HPE tool can securely erase current content of a server and help with consistent and easy operating system installation?

A customer plans to use HPE ProLiant servers for line-of-business applications. They want to configure the servers to increase reliability. Which workload profile should the custom...

A customer needs to provide inventory management, health monitoring, status alerting, and reporting for their ProLiant servers. Which HPE management offering meets the customer's n...

You are installing a data center switch. Which methods are recommended to configure the switch? (Choose two.)

You are installing new drives into the internal cage of a HPE ProLiant DL380 server. How is the drive device number set?

A customer is planning an upgrade in their data center. The customer needs to deploy on bare-metal and virtual servers easily through a common interface. In addition, they have exp...

You are creating a logical array on an HPE ProLiant server. The customer asks you to use drives with different capacities in a single array. What should you explain to this custome...

A customer is configuring their SAN. Which types of data typically require block storage? (Choose two.)

A customer requires a MSA storage system that they use for archiving dat

A customer needs to know if the storage solution you proposed contains components that are compatible with existing products currently in the data center. Which HPE resource should...

A customer has a HPE OneView environment and has added all their HPE ProLiant servers and enclosures. Which benefits does a customer gain by configuring Remote Support on their env...

You are designing a network for a customer that needs a centrally-managed solution for their physical and virtual switches. This product must integrate with their existing third-pa...

A customer needs an eight-port switch with Power over Ethernet (PoE) functionality and 1 Gb copper connectivity. They have limited IT resources, so they require a convenient Layer...

A customer is planning an upgrade to their network infrastructure. They want to move to an open networking solution, and they want to install a network switch that supports their c...

A customer has reported that while running an application that is streaming live data, they experience fluctuations in processor frequency as they increase the server performance....

A customer needs to implement VMware across a few racks of servers. They anticipate a large amount of VM creation and retirement. What are key technologies in a Top of Rack (ToR) s...

You are provisioning a new virtual disk group on a MSA storage system. Which disk group parameters must you specify when creating the vdisk? (Choose three.)

Why is RAID 6 the best option for a large RAID set for archive storage on large-capacity drives?

You are troubleshooting a HPE ProLiant Gen 9 server and need to find a consolidated view of all the system health and configuration information in a single web interface. Which HPE...

A server administrator needs to see the 24-hour history of the power consumed by an installed HPE ProLiant server. Which HPE tool can the admin use to gather this information?

When installing servers in a rack, a customer has left gaps between the servers. What should you tell this customer regarding the space between servers? (Choose two.)

A fast-growing customer with a NAS-based storage solution is evaluating Fibre Channel storage for their VMware environment. How would this customer benefit from adding 16 Gb Fibre...

You are installing a combined server and storage solution at a customer location. What must you keep in mind regarding the typical requirements for the location? (Choose two.)

A customer is planning an upgrade to their network. They need to combine multiple existing switches into one virtual device. Which technology should the customer configure on their...

A customer needs a storage to run a database in an environment with many virtual machines. You have recommended a HPE MSA 2042 solution, but the customer has reservations about whe...

A customer reports that their new iSCSI MSA 2052 has failed. You find that the MSA is up and running, but the servers cannot mount their LUNs. Which troubleshooting steps should yo...

A customer needs to replace an existing storage array. The new array must be suitable for remote office deployment and support the following: Multi-protocol connectivity Flash-acce...

You need to configure a HPE ProLiant server and plan to install an operating system that supports Secure Boot. Which system utility should you use to configure the server?

A customer requires 12 Gb local storage for their VMware boot volumes, which require high- performance read cycles to enable the operating system to boot quickly. Which drive type...

A customer is considering an upgrade of their network, which connects 10 servers. The customer has a converged data center networking architecture with Layer 2 and Layer 3 function...

You are managing a HPE ProLinat rack-mount server and need to determine when the Remote Console was most recently used. Where can you find this information?

While troubleshooting a HPE ProLiant Gen10 rack-mount server, you determine that the current and backup system ROMs are corrupt. What should be the next step to fix the server?

A customer needs to increase the availability and bandwidth of network connectivity to their servers. Which switch feature meets the customer's needs?

You are working on a server, and you notice that the blue UID light on the server is flashing slowly. What does this indicate?

In which layer of the OSI model would you find the media access control (MAC) address?

You are installing a HPE ProLiant server in a rack at a customer site. The customer's facility in a high- voltage utility service area, and they want to be certain that the power s...