HP2-Z33 · Question #23

Which command configures the management IP address on a WLAN controller?

The correct answer is B. oap management-ip 192.168.0.100 slot 1. ip-address: Specifies the management IP address of the OAP module. This address must be configured on the OAP module. slot slot-number: Specifies the number of the slot where the switching engine resides. The value of this field must be 0. Usage guidelines To use an NMS to…

HP Enterprise Networking Solutions

Question

Options

Ainterface ip address 192.168.0.100 slot 1
Boap management-ip 192.168.0.100 slot 1
Cmanagement-ip address 192.168.0.100 255.255.255.0
Dip address 192.168.0.100 24

How the community answered

(41 responses)

A
2% (1)
B
80% (33)
C
5% (2)
D
12% (5)

Explanation

ip-address: Specifies the management IP address of the OAP module. This address must be configured on the OAP module. slot slot-number: Specifies the number of the slot where the switching engine resides. The value of this field must be 0. Usage guidelines To use an NMS to manage the switching engine, you must first configure a management IP address for the engine. # Set the management IP address to 192.168.0.101 for the switching engine of the HP 830 Unified Wired-WLAN Switch. <Sysname> system-view [Sysname] oap management-ip 192.168.0.101 slot 0

Topics

#WLAN controller#management IP#OAP command#CLI configuration

Community Discussion

No community discussion yet for this question.

Full HP2-Z33 Practice