HP2-T25 Exam Questions
67 real HP2-T25 exam questions with expert-verified answers and explanations. Page 1 of 2.
- Question #1
Which statements are correct about the ProLiant warranty service level agreement? (Select two.)
- Question #3
Which statement is correct?
- Question #4
What does differential backup do?
- Question #5
When populating memory slots in a DL380 G7 server, which rule must be followed?
- Question #6
An engineer needs to mount an HP IP KVM G2 switch in an HP 10842 G2 rack. The rack does not contain a console. The customer does not want this switch to be mounted in a place that...
- Question #7
What is the first step when creating a NIC team using NCU?
- Question #9
An engineer needs to add two Extended Runtime Modules (ERM) on an existing HP R7000 UPS. How does the engineer need to configure the R7000 UPS with the extra available battery runt...
- Question #10
A support engineer needs to replace drives on a ProLiant Gen8 server and must securely erase customer dat
- Question #11
A support engineer is attending a call out for a DL360P Gen8 Server, where a hard disk within a four disk RAID 5 set has failed. The engineer notices that on three of the drives, t...
- Question #12
You replaced a Smart Array P812 in a DL380 G7 storage server. What should you do next?
- Question #13
A customer has placed a service call because RAID 6 cannot be configured on a Smart Array P420i controller using 4 disk drives. What is the most likely cause of the problem?
- Question #14
What must you consider when installing redundant fans?
- Question #15
What is required by iLO to support Agentless management? (Select two.)
- Question #16
When installing a rack in a data center, which way should the racks face?
- Question #17
Your customer's HP Integrity rx2800 i2 server fails to complete self-test. What can you check to find the root cause of the problem? (Select two.)
- Question #18
Which tool provides the most inclusive information about a server?
- Question #19
What are common types of virtualization? (Select two.)
- Question #20
While the system is online and the OS is operating, the HP Insight Diagnostics Diagnose feature performs diagnostics testing on which devices?
- Question #21
A customer asks you to check on the remaining life of the solid state disk drives. Where can you access the SMARTSSD Wear Gauge?
- Question #23
A processor failed and was replaced in an HP Integrity rx2800 i2 server. Which UEFI command should be used to verify that the new processor is active and, if needed, may be used to...
- Question #24
A customer has an HP Integrity rx2800 i2 server with one processor and two memory risers, each with four DIMMs. The customer added an additional memory riser with four memory DIMMs...
- Question #25
The system board of an HP Integrity rx2800 i2 server needs to be replaced. Which statements are correct? (Select two.) HP HP2-T25 Exam
- Question #26
You replaced a system board on an HP Integrity rx2800 i2 Server. Which iLO command menu option is used to re-enable network connection options, such as telnet and Web SSL?
- Question #28
A memory DIMM of an HP Integrity rx2800 i2 server failed and was deconfigured. You replaced it. Which statement is correct?
- Question #29
After the system board of an HP Integrity rx2800 i2 is replaced, which tool is used to set the mode of the SAS controller?
- Question #30
HP Support asked you to upgrade the firmware on the new DL380 Gen8 server you are installing at a customer's site. Which software tool can you use to do this?
- Question #31
What are features of Option ROM Configuration for Arrays (ORCA)? (Select two.)
- Question #32
How do you enter the RBSU on Post?
- Question #33
What is the default port to use to access the System Management Homepage with Internet Explorer for a ProLiant Server? HP HP2-T25 Exam
- Question #34
You need to replace one of the processors in a dual processor ProLiant Server. Which processor should become the primary processor?
- Question #35
How can you validate the installed firmware versions on an HP Integrity rx2800 i2 server? (Select two.)
- Question #36
The firmware was just updated on an HP Integrity rx2800 i2. Which command is used to determine if any firmware is in a pending state?
- Question #37
You are working on an HP ProLiant DL380 G7. HP Support wants you to send them a copy of the survey that captures detailed information about the server. How do you generate this fil...
- Question #38
An engineer installed an iPDU solution in a rack. While verifying the installation, the engineer discovers that the iPDU firmware is not up to date. Which method should the enginee...
- Question #39
Which statement is correct about upgrading ProLiant components?
- Question #40
An engineer will be installing an HP R7000 UPS and an Extended Runtime Module (ERM) in an existing HP 10642 G2 rack. This rack contains 10 DL380e Gen8 servers mounted 1U upward. Ho...
- Question #41
A customer has an HP Smart Array P420i Zero Memory Controller and the current configuration has the minimum number of drives for RAID 1 and one hotspare. What is the minimal requir...
- Question #42
What should be installed on a ProLiant Gen8 Server to display operating system information within the iLO GUI?
- Question #43
What should be installed on a ProLiant Gen8 Server to display operating system information within the iLO GUI?
- Question #44
Once the HPSReport generation program completes, what is the next step in the support process?
- Question #45
HP Support asked you to load diagnostics from a SmartStart CD to evaluate a DL360 G6 server. The customer removed the DVD drive and installed the optional disk backplane to add mor...
- Question #46
Which tool is used to identify correctable memory errors on a ProLiant Gen8 server that has an operating system without HP management agents installed?
- Question #47
What is the best way to exercise replaced DAS components in a server?
- Question #48
An HP ProLiant DL 380 G7 server has a failure indicating that memory slot DIMM 1 has errors. To troubleshoot the problem, you exchange the memory modules in slots 1 and 2 with each...
- Question #49
Which type of memory is used on the Smart Array controller cache?
- Question #50
Which statement is correct about the HP iLO Management Engine? HP HP2-T25 Exam
- Question #51
Which LED is a new feature for the 6 GB SATA disk drive in Gen8 servers?
- Question #52
Which hardware-based system security feature can securely store information, such as passwords and encryption keys, and can be used to authenticate the platform?
- Question #53
What is the term that describes the full backup typically performed by a system administrator every week?
- Question #56
Which RAID level allows the data to be striped across multiple RAIDs? (Select two.)