HP0-Y36 Exam Questions

Series equipment compare to the path costs on other equipment?

During a two-month migration project, you are tasked with changing many Cisco switches to HP A- Series switches. This migration will occur over several weeks, and you must try to m...

When Voice VLANs are implemented on an HP A-Series switch, how does the switch identify a VoIP device?

You are the network engineer responsible for the multi-area OSPF network shown in the exhibit. In order to keep the routing table and LSDB small on the R3 Router in Area 1, and to...

You have been asked to recommend a design and configuration for an HP OSPF multi-area network. In order to conserve memory and CPU cycles, you have been asked to configure Area 1 s...

Which OSPF LSA types represent external routes redistributed by ASBRs into OSPF, routes advertised by DRs, and LSAs generated by Graceful Restart routers? (Select three.)

Which statements are true about Bidirectional Forwarding Detection (BFD) for IPv4? (Select three.)

Which statements are true about Graceful Restart? (Select three.)

Which criteria can be used for the BGP best path selection algorithm on HP A-Series ? (Select three.)

SFP+ failure causes the link between member switches 2 and 3 to no longer operate. MAD was not configured in the IRF stack. How would "MAC persistent" affect the operation of the s...

The IRF link has failed between Slave 2 and Slave 3 in an IRF stack. MAD BFD was enabled and functional before the failure. Which action should you take to correct the failure?

What is an advantage of PIM-SM over PIM-DM?

Identify the multicast addresses. (Select four.)

In this star topology, router HKG is the hub. Routers SIN, SGN, and KUL are spokes and are not interconnected. A multicast source at 10.1.1.1 is functioning and able to send stream...

In this star topology, router HKG is the hub. Routers SIN, SGN, and KUL are spokes and are not interconnected. A multicast source at 10.1.1.1 is functioning and able to send stream...

During a migration to HP A-Series equipment, you have been tasked with reconstructing access-control lists from another vendor equipment. Which statement is true about implementing...

In an attempt to control unauthorized Internet access during non-business hours, you implement time-based ACLs on the edge router of your branch offices, prohibiting access in the...

An HP A5500 Switch is to be moved from a lab environment and placed in operation within the access layer of the enterprise network. The desired configuration file, switchconfig.cfg...

Which Quality of Service model delivers the most predictable and consistent level of performance?

Which statement is true about traffic policing and traffic shaping Quality of Service (QoS) mechanisms?

Weighted Random Early Detection (WRED) is often implemented in order to prevent which issue?

Which feature of MPLS Layer-3 VPNs enables two different customers to use the same IP address range?

Prefixes from two different customers are advertised between two Provider Edge routers using Multi-Protocol BGP. Which feature of MPLS Layer-3 VPNs allows these prefixes to be plac...

What does VPLS in Kompella mode require?

AS 20 advertises prefix 20.0.0.0/8, and AS 30 advertises prefix 30.0.0.0/8. On Router-3, what is the BGP Next Hop attribute for prefix 30.0.0.0/8?

AS 20 advertises prefix 20.0.0.0/8 and AS 30 advertises prefix 30.0.0.0/8. On Router-1, what is the BGP Next Hop attribute for prefix 20.0.0.0/8?

A customer of an MPLS provider sends a traceroute between two of its sites. The traceroute output includes a Provider PE router but does not include any Provider P routers. Which M...

What is a useful purpose for the reserved MPLS Label 0?

Click the Exhibit button. Label Switching Router P-3 allocates MPLS label 3001 for FEC 15.1.1.1/32 and label 3002 for FEC 15.2.2.2/32. Which MPLS label is advertised by PE-1 to P-3...

Click the Exhibit button and view both exhibits. Router PE-2 responds to a ping sent from the loopback 0 interface of Router PE-1, 15.1.1.1. This echo reply is captured by a protoc...

Click the Exhibit button. All routers shown in the exhibit are configured for OSPF and MPLS on all interfaces. Router P-3 and Router P-5 have two directly connected LDP peers. Traf...

Which statement is true about LDP?

A provider of MPLS services offers multiple types of MPLS-based VPNs to its customers. A customer connects a router with MAC address 0023.8900.aaaa to the provider router PE-1. On...

Which technique does a provider use to prevent loops within a full mesh of VPLS pseudowires?

Click the Exhibit button and examine both exhibits. The provider provisions a VPLS for Customer Blue using LDP signaling and a VPLS for Customer Orange using MBGP signaling. A Cust...

A provider of MPLS services configures MPLS Layer-3 VPN services for two customers. Each customer has three branch offices that will be interconnected by MPLS Layer-3 VPNs. The add...

Which method of routing loop prevention is used by eBGP?

Click the Exhibit button. A multicast packet from 168.9.10 destined for 239.1.2.3 arrives at Router-1 on interface GE 0/1. How is the packet processed by Router-1?

Which four are multicast addresses? (Select four.)

You are importing RIP routes into OSPF and have been asked to filter out selected routes. In particular, you want to import only 192.168.x.x routes that have a /24 mask. You want t...

In BGP routing, what is the significance of a route received from an eBGP peer with the No-Export community?

Which characteristics are common to both MPLS L2VPNs and VPLS? (Select two.)

A PE router configured for L2 MPLS VPNs receives an Ethernet frame from a CE router. Which tag must be unique from the perspective of the provider?

When configuring Spanning Tree on HP A-Series switches, which feature should you enable on the access layer to prevent unknown network devices from participating in Spanning Tree?

Click the Exhibit button to examine a network diagram and four configuration options. It is suspected that an attacker on the outside of the network is attempting to compromise you...

A provider of MPLS services configures MPLS Layer-3 VPN services for two customers. Each customer has three branch offices that will be interconnected by MPLS Layer-3 VPNs. The Rou...

Click the Exhibit button to examine a network diagram and router configuration. The provider provisions a VPLS for Customer Blue using LDP signaling and a VPLS for Customer Orange...

Click the Exhibit button. All network routers shown in the exhibit are configured for OSPF and MPLS on all interfaces. Router PE-1 and Router PE-2 have two directly connected LDP p...

Based on the provided `[switch]display irf` output and associated information, which of the following is the Bridge MAC address of the IRF?

How many fields in the outer MPLS label change values on every LSR as the packet transits an MPLS network?