HP0-S34 Exam Questions
154 real HP0-S34 exam questions with expert-verified answers and explanations. Page 1 of 4.
- Question #1
A customer has 30 HD drives in a RAID 60 with five parity groups. How many drives can simultaneously fail in the array?
- Question #2
A customer has two logical drives (logical drive 1 and logical drive 2) configured on a smart array controller. The customer wants optimize logical drive 2 for database information...
- Question #4
Which tool can an administrator use to force the OS to generate a crash dump log
- Question #5
Referring to the exhibit shown, which LED on HP proliant Gen8 hard disks identifies fault or failed?
- Question #6
Using the latest HP Proliant Support Software and Gen8 servers, which component is no longer used for software and firmware baselines?
- Question #7
A customer wants to monitor the power load per server and control power balance on the data center level for HP Proliant Gen8 servers. Which component should you recommend?
- Question #8
An engineer needs to replace a memory DIMM in an HP proliant server. Which precautions must be taken? (Select two)
- Question #9
A customer has two logical drives (logical drive 1 and logical drive 2) configured on a smart array controller. The customer wants optimize logical drive 2 for database information...
- Question #10
A customer purchased many HP DL380 Gen8 servers. The customer wants to monitor the power load per server and control the load balance at the data center level. Which product should...
- Question #11
An administrator installed a new DDR3 memory in a server and discovered that the server contained quadrank, dual-rank and single rank memory modules. What should you recommend?
- Question #12
A customer wants to use a Graphic Processing Unit (GPU) in a server and needs 12 internal hot- plug drives to meet application performance requirements. Which HP server model shoul...
- Question #13
Which HP DL160 Gen8 server component is redundant?
- Question #14
A customer wants to enable HP Integrated-Lights-Out (iLO) security on a DL380p Gen8 server. Which HP ressource should you use to verify the corresponding system maintenance switch?
- Question #15
Which functionalities are provided when HP Insight online is used as a standalone version without Remote Support? (2)
- Question #16
You connect a DL380 Gen8 server with redundant power supplies to its power source. How many different power circuits do you need?
- Question #17
Which Source Media Types are supported in Intelligent Provisioning? (Select four)
- Question #18
A customer ask if HP Service Guard for Linux is certified for an HP Proliant based cluster solution. Which ressource can you use to find this information?
- Question #19
What is the maximum number of enclosures that can be cascaded when cascading D2600 enclosures connected to an HP Smart Arry Controller?
- Question #20
What is the maximum number of D2700 enclosures that can be cascaded in a dual domain configuration? (2)
- Question #21
An administrator wants to use spare memory from an HP Proliant G7 to populate an HP Proliant Gen8 server. What should you recommend?
- Question #22
Which HP storage options can be integrated in a server solution when 6 Gb SAS direct-attached storage is needed? (select 2)
- Question #24
What are the hardware differences between Integrated-Lights-Out Management (iLO) used in Gen8 servers compared to previous iLO generations? (select 2)
- Question #25
You are planning to install an HP DL380 Gen8 server at a customer site. The customer wants to use the HP Agentless management functionality. Which statement is correct when impleme...
- Question #26
What are Gen8 ROM function features? (select 2)
- Question #27
A customer needs a 6 Gb/s SAS controller for a server and does not want to lose data when the battery is down. The customer also wants the adapter to support more than 96 disk. Whi...
- Question #28
An administrator installed new DDR3 memory in a server and discovered that the new memory has a voltage of 1.35 V, which is lower than the 1.5 V of the existing DDR3 server memory....
- Question #29
Which redundancy status and alerts does the agentless sub-system of an HP ProLiant Gen8 server cover? (select 2)
- Question #30
HP ProLiant DL380 Gen8 servers a Flexible LOM option. Which technologies are supported? (select four)
- Question #31
A customer needs to connect a DL380 Gen8 with a D2600 disk enclosure. Which controller should be used to get 6 GB/s speed without having to be concerned about the battery?
- Question #32
Referring to the exhibit shown, which technology provides the shortest recovery time frame, but not the highest data protection level?
- Question #33
A customer with more than 5000 users wants to build a website. The customer's plan includes HTTP, database, email, and domain servers. What is the best practice recommendation that...
- Question #34
How does the HP Active Health System (AHS) differ from previous Integrated-Light-Out Management or CDbased diagnostic tools?
- Question #35
A customer wants to build a high performance environment with three Graphic Processing Unit (GPU) acrds and minimize power consumed. What should you recommend?
- Question #36
Which HP Tool can you use to power size HP's newest servers, including ML, SL, DL and BL?
- Question #37
An administrator installed new DDR3 memory in a server and discovered that the new memory has a frequency of 1333 MHz, which is higher than the 1066 MHz of existing DDR3 memory in...
- Question #38
When booting an HP ProLiant Gen8 Server, which function key is pressed to lauch the Array Configuration Utility?
- Question #39
Which pre-failure alert does the agentless sub-system of an HP ProLiant Gen8 server cover? (select 2)
- Question #40
A customer recently noticed that a cluster built on a 1 GbE is very slow when large amounts of data are transferred. The customer wants to be able to get the widest bandwidth with...
- Question #41
An administrator has a new HP ProLiant Gen8 server and wants to register for Insight Remote Support. Which tools can be used to do this? (select 2)
- Question #42
When adding an agentless server in the Device Management Console (DMS), which information must be specified? (select 2)
- Question #43
When using HP SIM 7.0, which information can be collected from an HP ProLiant Gen8 server without running the HP Agentless Management Service? (select 3)
- Question #44
Agentless management provides pre-failure alerts for which subsystems in an HP ProLiant Gen8 server? (select 3)
- Question #45
Using HP Insight Remote Support Standard 5.70, which tool can be used to identify the HP Case ID when a ticket was opened in the support workflow system?
- Question #46
Which Smart Array Advanced Pack 2.0 (SAAP2) features are embedded in the firmware of the Smart Array P421 controllers? (select 3)
- Question #47
In the exhibit shown, which number identifies the memory speed of a DIMM?
- Question #48
What provides agentless server management?
- Question #49
When viewing the Active Health System log in an HP ProLiant Gen8 server, what provides information on driver versions?
- Question #50
What is the preferred way to update component firmware in HP ProLiant Gen8 servers?
- Question #51
Which statement is correct concerning agentless management in HP System Insight Manager version 7.0 end higher?
- Question #52
Which source describes the standardized troubleshooting procedures for HP ProLiant servers?