H35-211 Exam Questions

(single) Monitoring of environmental quantity refers to monitoring of environmental factors that may cause equipment damage, failure, and the like. Which of the following is not an...

(single) Which of the following is the transport layer protocol used by SIP messages?

(single) Is the following description correct? Can the test engineer use the SmartKit NSE2700 Inspector to improve ADSL port activation efficiency?

(multiple) In order to improve the efficiency of the upgrade, the DC tool is usually used for the upgrade. Which of the following operations does the DC tool support?

(single) Which application scenario is Huawei HG8245 currently suitable for?

(single) After the following types of DBA templates are bound to Tcont, when the remaining bandwidth of the PON port is viewed, the remaining bandwidth of the PAN port in the uplin...

(single) Which of the following isql login database commands is correct?

(multiple) Which of the following are the methods and ideas for XDSL dialup abnormal fault location?

The total downstream bandwidth of the 10G EPON PONI port is the sum of the EPON downstream bandwidth and the 10GEPON downstream bandwidth.

What is the downstream wavelength in the 10GGPON system?

What is the maximum splitting ratio supported by 10GGPON?

During the evolution of EPON to 10G EPON, the central office adds WDM wavelength division modules to achieve a smooth transition, and ODN coexists.

The complete SIP message interaction process will include multiple request and response messages. A field can be used in the header field of the SIP message to describe the specifi...

Under the H.248 protocol, if the signaling IP and media IP are both 10.1.1.100/8 and the voice gateway is 10.1.1.1, when configuring the voIP service, which of the following comman...

When the invitation message sent by user A reaches user B after passing through servers C, D, and E, in which order is the server address recorded in the VIA field in the message r...

The Max-Forwards field can be used in S1P messages to resolve loops and avoid endless message forwarding.

Which is the correct multicast MAC address corresponding to the multicast IP address 227.120.1.32?

(single) When the MA5680T traffic is scheduled, which of the following traffic will be marked as red?

(single) Is the following description correct? Under IGMP snooping, two users on the OLT broadcast the same program, and the OLT sends two join messages to the multicast router.

Single) What is the command to support local loopback on the MA5600 ADSL port?

(single) After installing the sybase patch, which of the following commands can display the version information of the sybase patch that has been installed?

(single) Is the following description correct? The minimum activation rate (Minimum transmission rate) in the ADSL/ADSL2+ parameter indicates the minimum activation rate that must...

(single) MA5680T in the template mode, tcont, gemport configuration integration where to configure?

(multiple) If the MA5680T fails to boot properly (non-hardware problems, the system keeps restarting), usually we can use the BIOS upgrade method to end. What kind of uploading met...

(single) Is the following description correct? The MSAN is connected to the lanswitch GE or the FE. The working mode of the two ports can be either auto-negotiation mode or mandato...

(single) Which of the following products in the GPON network does not belong to the MDU series?

Is the description under (single) correct? When a multicast service is configured, the VLAN carrying the multicast service must be the same as the id of the unicast VLAN.

(single) By default, which type of queue scheduling mode is on the MA5600T/MA5680T?

(single) According to the IEEE 802.1Q standard, where is the VLAN identification field in the Ethernet frame?

(single) Is the following description correct? The MA5600T/MA5680T supports Ethernet, E1, and POTS services on the PON side and does not support ATM services.

In the Huawei U200 management system, when adding access network elements, you can only add them one by one.

What methods can be taken when the OLT processes priority marking? (Multiple choice)

OLT usually uses queue scheduling technology to solve traffic congestion. How many queues does the OLT have?

What are the main congestion management technologies in OLT? (Multiple choice)

Which of the following statement about SSH connections is wrong?

Which statement is wrong about DHCP option 82? (Multiple choice)

What are the main solutions to MAC address spoofing? (Multiple choice)

(single) Is the following description correct? The level of the MA5600T alarm can be divided into five levels: critical, major, minor, warning, and cleared.

(single) When locating ADSL/ADSL2+ failure, which of the following reasons may cause the user to make a call but not to access the Internet?

(multiple) When the ADSL/ADSL2+ line is in good condition, what parameters can be tried to adjust to increase the transmission rate?

Is the description under (single) correct? The GPON system inherits the TDM signal. The essence of the TDM signal is to encapsulate the TDM into a GEM frame on the ONU. The GEM fra...

(single) Is the following description correct? The traffic suppression function of the Traffic-suppress on the uplink port of the MA5680T is only suppressed for unknown multicast.

(multiple) VoIP users can hear normal dial tone after picking up the phone, but after dialing, the dial tone does not stop. What are the possible reasons?

(single) Is the following description correct? When negotiating the project acceptance test project with the customer, it is recommended to submit the product related product accep...

(single) The IMGP version on the MA5680T is configured as V2. What happens after the MA5680T receives the join message from the IMGP V3 forwarded by the ONT?

(single) Which field of the PPP frame is used to identify whether the carried message is IP or IPX?

(multiple) The called phone can ring normally but does not display the caller number. What are the possible reasons?

(single) Which command is required to configure the chassis connection in the UA5000 chassis of the high-density PVM master?

(multiple) Which of the following are general methods for XDSL fault location?

(multiple) Which of the following factors may cause a noise in the call?