EW0-300 Exam Questions

Like OSPF stub areas, NSSA areas cannot be used as transit areas for virtual links.

Which option must be configured when running ESRP and Spanning Tree with the same VLAN on the same switch?

Type-2 LSAs are genereated by this OSPF router type

The following ExtremeWare components are required on Extreme Networks switches with the ? chipset to build an SLB system. (Choose all three that apply)

A stream of IP Multicast packets is addressed to

In a Summit 5i switch, a QoS policy is applied on a basis.

What mechanisms does a master node use to detect a failure in the EAPS ring architecture? Select the two that apply.

An Ethernet multicast MAC address always starts with 01005E.

The normal behavior of a Router is to forward Unicast packets and block broadcast traffic.

When the CLI command show vlan corporate, is issued, the Protocol field has a value of NONE? Why is this so?

Select the incorrect statement for PIM.

A switch originally configured as a VRRP back-up switch has the following potential VRRP states Choose all three that apply.

What does IS-IS stand for?

Limit-learning and lock-learning cannot be combined on the same virtual port.

Virtual links are always configured to be a necessary part of all OSPF networks using Extreme's Summit 48i switches.

Is it possible on a single switch, to put different physical ports, belonging to the same VLAN, into different STPD's?

How are multicast packets forwarded in a Layer 2 environment with IGMP snooping enabled?

Radius and Tacacs+ are both access security features supported by Extreme Networks. Servers running these two features are also known as AAA servers. Where do these 3 A's stand for...

What is true about the StpdID?

A QoS profile determines into which hardware queue a frame is enqueued.

In SLB the forwarding mode is the method a switch uses to forward traffic to the virtual servers. On the Summit 7i switch four forwarding modes are supported, select the two forwar...

The OSPF LSA Link State type that all OSPF routers generate is the LSA LS type 1 Router LS

What mechanism is used by IGMP to manage host groups?

Re-establishment of a previously pruned network branch is not supported by DVMRP.

The Address Resolution Protocol enables a device to learn a destinations MAC address by using the destinations known IP addresses in the ARP request.

The pre-empt option in VRRP is enabled by default on Extreme Networks switches. Pre-empt ensures that

There is one ACL type supported by Extreme Networks switches that can only be dealt by the CPU. Which type is it?

In SLB a virtual server cannot belong to the same VLAN as the nodes in the referenced pool.

SSH2 on Extreme Networks ? chipset switches enables encrypted telnet sessions towards the witch. SSH2 Client and Server both have a private key and exchange a public key before the...

What are the steps for DVRMP to begin routing multicast packets?

IP Version 6 has amongst other differences with IP Version 4 also different address length. What is the size of an IPv6 address?

Which statement is true about integrated IS-IS.

By default OSPF hello packets are sent out every

Which of the following CLI commands could you use to determine which ports are enabled for ESRP host attach?

Dealing with an Access Control List on Extreme switches it's required to include a precedence number when configuring the default rule.

When limit-learning is configured on a port and the limit is reached the following traffic still flows to the port.

Extreme ware 7.0 supports both level1 and level 2 IS-IS routers.

The integrated IS-IS protocol allows for mixing of IP-only,OSI-only, and dual (IP and OSI) routers.

In OSPF, the router type that is required to connect an area with another area is the

EAPS protection switching is similar to what can be achieved with the Spanning Tree Protocol but one of the big advantages of EAPS is

On a RADIUS server you can distinguish between switch access and Netlogin authentication. Extreme provides a vendor specific attribute ExtremeExtreme-Netlogin-only =disabled/enable...

The following modes of operation are supported with the Network login feature. (choose all that apply)

An LSP is a link state packet used by which routing protocol?

It is possible to set an STP-threshold to switch from a shared tree to a shortest path tree. This switch over will be initiated by

According to accompanying diagram and ACL configuration it is possible for Host A (10.10.10.100) and Host C (30.30.30.100) to successfully communicate.

The maximum number of EAPS domains supported per switch and ring is?

In Extreme Ware, which one of the following is an optional ESRP configuration that allows you to connect active hosts directly to an ESRP master or standby switch.

Which CLI command configures DVMRP on all IP multicast interfaces.

According to accompanying diagram and ACL configuration it is possible to telnet from host A to any of the switch IP addresses.

The following CLI command is valid to advertise SLB virtual servers in OSPF ith a cost of 10. Enable ospf export vip cost 10