EW0-200 Exam Questions

For full resilience a BlackDiamond 6816 can have up to four Management Switch Fabric Modules (MSM64i). But it will also operate with only one MSM64i.

ExtremeWare supports two levels of management ?user and administrator. When logged in as a user, one has viewing access to all manageable parameters including User account database...

The Alpine series switches are provided with a passive backplane.

Which CLI commands would you use to configure VLAN CORPORATE (tag 100) with ports 1:1 through 4:8 tagged and ports 5:1 through 8:8 as untagged?

Is this a valid CLI command : enable ignore-stp vlan default?

I/O modules for the BlackDiamond 6808 and Alpine 3804 switch products are interchangeable.

It is highly recommended to change the SNMP community strings on an Extreme switch from the factory default. The following well-known community strings apply by default:

What does the TFTP acronym stands for?

Which parameter do you change on a switch to increase the probability that it becomes the root bridge in STP.

Which of the following protocol filter/s is/are predefined in ExtremeWare?

Which CLI command would you use to create a blackhole route that blocks traffic to the 10.0.0.0/8 network?

What is a CP SYN?request?

The CLI command: ?7KH&/,FRPPDQGshow s0?and the CLI command ?"DQGWKH&/,FRPPDQGshow stpd s0?will display the same result.

The RFC 1918 describes the use and benefits of IP address space for private Internets. The following IP address 172.16.280.4/24 can be considered as a valid private IP address.

In OSPF, a router whose interfaces are all in the same area is called an OSPF router type:

When a bridge receives an Ethernet frame with an unknown destination MAC address, what does it do?

Which routing solution in IP RIP prevents loop problems by sending a hop count of 16?

The modular BlackDiamond 6804 switch supports the following legacy WAN modules? (Choose all three that apply)

Given the following diagram, which command would you use to send a switch configuration file from the TFTP server to the switch?

What is the default value for the RIP garbage-time setting?

Which protocol operates in Layer 4 ?Transport Layer, of the ISO-OSI 7 Layer Model?

The IP forwarding function and routing protocols on an Extreme switch are disabled by default.

Which CLI command would you use to create a static route to the 10.0.0.0/8 network with a gateway of 192.168.0.1/24 and a metric of 2?

In spanning tree, the designated bridge is the bridge with the:

Extreme Networks switches that use the ?chipset support switching and routing of jumbo frames at wire-speed on all ports.