E20-611 Exam Questions

What is the purpose of Sniffer?

What is the reason for a failed reboot of a storage processor at the conclusion of the Storage System Installation Wizard operation?

In a CLARiiON array, how many disks are allowed in a RAID 3 group?

Company.com reports that one of the high-availability (HA) Windows production hosts in a multihost HA environment has lost access to all its LUNs. What is the first thing that shou...

Which tool contains the Enhanced Installation Procedure?

If Company.com Engineer (CE) has a CLARiiON CX array with a corrupted boot image, how would the CE gain access to the Utility Partition?

How much memory is installed on each CLARiiON CX3-10c SP?

What is indicated by the fault light continuously flashing four times per second on a faulted storage processor?

As shown in the exhibit, what is the most likely failing FRU/CRU in this CLARiiON CX series array?

What is the maximum number of disk drives supported on each back-end loop of a CLARiiON CX3- 40f array?

Which cable is installed to connect SPA to DAE 0 on back-end Loop 1?

When analyzing the exhibit, what is the problem?

How many power supplies must be present to start Write caching?

Which two are required to access the On-Array Management GUI?

In a DAE3P enclosure, which disk drives should be installed in the lowest numbered slots first?

Excluding hot spares and individual disks, which RAID types are supported on the CLARiiON CX3-40c running release 24 software?

What is the cr flag used for in the setsniffer command?

What is the maximum cable length between DAE3Ps?

Which utility is used to unpack and sort the contents of SPCollect files?

Which three CLARiiON models feature field-replaceable I/O modules?

An SP on a CLARiiON CX3-40 is constantly rebooting. Which communication method would be used to capture POST information?

A security file is required when issuing naviseccli commands without user/password/scope arguments. Where must the user security file be located?

Company.com has a CLARiiON CX700 connected with a single host that has eight HBAs. Which topologies are available to the customer?

Which information will the SWAT utility analyze?

When configuring eMail in the ConnectEMC Console, what is performed by clicking the Test button?

What will the SP do when cache does NOT have enough room for the incoming I/O?

What does the status "0x22" mean in an 820 Soft Media Error?

Company.com has a two-node cluster connected to a CLARiiON CX3-80. Each host is configured with its own storage group. What is the reason for having two storage groups?

You are running Arrayside FBI on a CLARiiON CX700 with 240 drives for the third time. How many rls files per SP will you have?

In a CLARiiON CX3-10c, which disk may be selected as a hot spare?

A Company.com Engineer needs Array Agent information from a CLARiiON array. The array is running FLARE release 24. Which command has the correct syntax to retrieve the information?

Where is the location of the checkbox for enabling LUN masking?

What is indicated by the fault light continuously flashing once per second on a faulted storage processor?

What is required to connect to a CLARiiON CX500 through the serial port?

Which operation has to occur during a back-rev installation?

How many hot spare disks are required in a CLARiiON CX3-40 array?

In a CLARiiON CX3 array, where is the image repository found?

Company.com Engineer has been requested to gather SPCollects from a CLARiiON CX series array. The CE has no access to the array other than through a Sun host running Navisphere CLI...

You are using the host-based FBI to monitor an FC4500 array. Which interface is recommended?

Which statement accurately describes the installation of both DAE2P and DAE3P enclosures in a CLARiiON CX3-80 array?

The event log of a CLARiiON CX3 series array has displayed the following error message: 09/26/05 18:10:49 Bus1 Enc4 Dsk5 820 Soft Media Error 22 0 0 Which explanation should be pro...

Which two CLARiiON models use a DPE?

Company.com Engineer is sent to Company.com site to replace an Array Management Module for a CLARiiON CX3-80. Where is the Management Module for SPB located?

In the Connectivity Status dialog box, an initiator that is logged in is selected. What is the result when you click Deregister?

Company.com is about to configure a newly installed CLARiiON CX3-80 with 30 disks. What is a recommended disk to assign as a hot spare?

Which RAID type is categorized by parity being written to a single disk drive?

Which tools are used to collect and analyze switch configurations?