E20-377 Exam Questions

You are installing several Microsoft Windows kdriver splitters in a RecoverPoint environment. You receive the dialog box shown in the exhibit and the installation fails. What is th...

You are designing a SANTap splitter deployment. The customer wants to know the benefit of updating the SAN hardware from SSM to MSM cards. They need to be able to show a cost- effe...

In preparing to upgrade a Brocade splitter, which components must be manually updated?

A customer has executed a failover operation in a CLR environment due to a problem on the production copy. Which operation will demand a delete of the production or local copy?

A customer has opened a service request stating that one of the consistency groups (CGs) is going through High Load twice a day in a RecoverPoint CRR environment. What is a possibl...

You have configured replication using CLR. After a failure, you decide to restore production from a point-in-time image of the local CDP copy. What must you consider before restori...

A customer has asked you to advise them on how to replace a failed host HBA in a RecoverPoint SANTap environment. Which RecoverPoint zones need to be repaired for SANTap to split w...

You are preparing to upgrade RPAs to 3.4 using Deployment Manager. The RPAs are in a private network with no unsecured hosts in the same subnet. What is a base requirement for a De...

An ISP provider is planning to implement RecoverPoint using a VNX/CLARiiON splitter as a disaster recovery mechanism for its customers. What is a valid implementation type for achi...

You are trying to configure AVT zones for a SANTap environment in RecoverPoint using a new MSM 18/4 card installed in an existing director. You connect using SSH into the RPA as th...

You have finished installing and configuring RecoverPoint. You created a test consistency group and did not enable it. Then, you installed Brocade splitters, added them to the Reco...

You are using Deployment Manager to install RecoverPoint. After entering the data for the Site 1 "NTP Server 1" and "NTP Server 2", you notice that the Site 2 NTP Server fields hav...

You are installing a Brocade splitter. You want to coordinate the names of the splitters in the RecoverPoint Management Application. When is the name of the splitter determined?

While managing the RecoverPoint environment, you are asked to change the configuration of a LDAP user. Which RecoverPoint UserID must be used?

After a week of the initial installation and configuration of the RPAs, replication has paused and features are disabled. What is the reason for this behavior?

You are configuring a Brocade splitter. You now want to ensure the splitter is visible to the RPAs. Which step must you complete next?

When are `lsan_red...' zones automatically created with Brocade splitters?

You have finished installing and configuring RecoverPoint. You created a test consistency group and did not enable it. Then, you installed kdriver in the Microsoft Windows host, re...

An administrator would like to test a replica. They have indicated performance of the replica is critical as the test involves heavy read and write operations. They do not want to...

When deploying RecoverPoint in a CRR over FC configuration, how should the FC communication be configured?

An organization plans to provide a disaster recovery (DR) solution for four separate customer sites. They want to replicate a VNX production volume to a stretched CDP copy and to a...

A customer has a RecoverPoint/CL environment and wants to enable compression through RecoverPoint Management Application. Which types of compression are supported for a consistency...

What are three potential bottlenecks that can limit the amount of write I/O the RecoverPoint system can sustain for remote replication?

You are in the planning stages of a Brocade-based splitter implementation at a customer site. The customer is concerned that bringing the splitter online will cause an outage in th...

You are reviewing an existing SAN to add RecoverPoint. The SAN includes several B-Series directors and departmental switches in a core/edge topology. New hardware must be purchased...

A customer is replicating over FC between two sites. They would like to minimize the RPO but cannot tolerate any performance impact to the host. What would you recommend to the cus...

In a CRR asynchronous environment, which RecoverPoint feature can be enabled in order to reduce data transfer time?

Refer to the Exhibit. You are troubleshooting a RecoverPoint issue where distributed consistency groups have stopped working. While analyzing the problem you ran detect Fibre Chann...

You have a Brocade splitter using frame redirect in a RecoverPoint environment. You are writing a script to automatically view the host-to-target relationships. Which command shoul...

A customer network environment uses Ethernet frames of 2400 bytes. How do you configure the RPAs to comply with this requirement using SSH?

When implementing CDP in a RecoverPoint/SE environment, which volumes must be created on a single VNX/CLARiiON array?

A customer has asked you to evaluate their RecoverPoint configuration. It is a CRR implementation. They are experiencing High Load events for many consistency groups (CGs) assigned...

Refer to the Exhibit. The Brocade splitter on an AP-7600B has stopped communicating with the RecoverPoint Management Application. You have logged into the blade processor (BP) and...

What is required to take advantage of the RecoverPoint WAN deduplication feature?

You are implementing a RecoverPoint CRR solution. The RPAs that were delivered do not have the correct version of RecoverPoint. What is the EMC-preferred way to load the correct so...

A customer is planning to deploy a 2-node RecoverPoint cluster at each data center. They will make use of dual stack for its LAN network connection. How many IP addresses should th...

A customer wants to add a new RecoverPoint UserID. Which role must their UserID belong to in order to manage user settings?

In a cascaded RecoverPoint configuration, a customer experiences a site failure at the secondary site. What impact does this have on replication?

You are finalizing a RecoverPoint setup that makes use of the Symmetrix VMAXe splitter. You are about to create the masking view for the RecoverPoint cluster initiator group. Which...

Which device allows the installation of a Brocade splitter into a DCX director?

What is the blade processor in a Brocade splitter?

A customer has a RecoverPoint environment defined with two RPAs at each site. They created two consistency groups (CGs), each one in a different RPA . Their business requires that...

You have just enabled the zones and re-enabled the configuration on a AP-7600B switch. Where would you run the thirdparty/recoverpoint/install/kdrv status command to verify the sta...

Refer to the Exhibit. You are troubleshooting High Load activities on two consistency groups (CGs). As part of your tasks, you have run the data collect and are reviewing the syste...

When installing a Microsoft Windows kdriver splitter, you receive the dialog box shown in the exhibit and the installation stops. What must you do to recover the installation?

You have finished deploying SANTap in a RecoverPoint CRR environment. At Site 2 everything looks fine. However, at Site 1 you see the following message on the RecoverPoint Manageme...

In a Brocade splitter implementation using frame redirect mode, how many DPCs are available?

You are selecting the RecoverPoint repository volume using Deployment Manager at a customer's site. If the customer's environment makes use of an EMC VNX array, what needs to be co...

You have installed the Solaris kdriver on a host. When validating the installation, you find that the splitter is not seen by the RecoverPoint Management Application. Other splitte...

You are configuring multiple RecoverPoint 3.4 SP1 clusters sharing a single VNX splitter. Every time you attempt to attach a volume to one of the clusters, you get the error "attac...