DES-6321 Exam Questions
113 real DES-6321 exam questions with expert-verified answers and explanations. Page 1 of 3.
- Question #1
A 4-node VxRail Model E560F solution with an embedded vCenter and Log Insight is planned for deployment. Prior to deployment, DNS records must be created for which hosts?
- Question #2
What is the default network traffic configuration for a VxRail node with 2 x 10 GbE ports?
- Question #3
What is required to enable vSAN encryption on a VxRail cluster?
- Question #4
A customer is configuring VxRail to connect to an existing, external SRS VE. Their support account is associated with the Site ID/Party ID where VxRail is installed. A validation e...
- Question #5
An implementation engineer is attempting to add a new node to a 3 node VxRail cluster. What is the minimum VxRail code version that no longer requires the fourth node to match the...
- Question #6
What is the minimum number of VxRail hosts required if FTT = 1 and FTM is set to Erasure Coding?
- Question #7
A Dell EMC solutions architect has updated the VxRail PEQ with Customer Top-of-Rack (ToR) switch details. On which worksheet would they need to be to generate a new NVT JSON file?
- Question #8
A failure occurs during the deployment of a VxRail cluster. You need to look through the marvin.log file to see what could be causing the error. Where is this file located?
- Question #9
The vCenter managing a VxRail cluster must be able to support both Enhanced Linked Mode and vSAN Encryption. What is the correct configuration to satisfy this requirement?
- Question #10
Where is the VxRail Manager pre-installed on a newly shipped, 4 node VxRail Model G410 system?
- Question #11
In a 5 node VxRail cluster in which all nodes are the same model, which cluster requires the least amount of rack space?
- Question #12
A newly installed VxRail system appears to have poor vSAN performance for all VMs on the cluster. What can be used to identify the issue?
- Question #13
What is not a requirement for a VxRail External vCenter deployment?
- Question #14
Which vSAN setting is enabled by default during the initial deployment of a VxRail cluster?
- Question #15
What is used to control remote access to VxRail through SRS?
- Question #16
How many nodes can be added simultaneously to an existing VxRail cluster running at code version 4.5?
- Question #17
What output logs are collected using the vc-support.sh script?
- Question #18
What is the correct order of steps to install a Dell PowerEdge-based VxRail cluster? Steps to order: Configure iDRAC for remote management of nodes, Cable ToR switches to VxRail no...
- Question #19
Match the management tool that is used to perform the associated operation in a VxRail environment. Operations: Serviceability, RASR, Analytics, Deploy templates. Tools: iDRAC, vCe...
- Question #20
In addition to the VxRail YouTube video, links to what resources should the SE send to the customer, according to the VxRail PEQ Engagement Details worksheet?
- Question #21
What does vSAN use to make metadata available to each host in the VxRail cluster?
- Question #22
You are validating that a network environment is ready for a 4 node VxRail Model V570F deployment. What types of DNS records must be created for VxRail components before implementa...
- Question #23
Which port configuration is invalid on the integrated NIC of a VxRail node?
- Question #24
Which command can be used from VxRail Manager VM to restart the loudmouth daemon?
- Question #25
You are expanding the capacity of a Hybrid VxRail by creating an additional disk group. The new disk
- Question #26
group will be composed of five drives on all participating cluster nodes. When you attempt to add the new disks to the vSAN datastore you receive an error message about there being...
- Question #27
What action is required to enable VxRail Manager the ability to update system software and browse VxRail KB articles?
- Question #28
How does the Network Validation Tool (NVT) validate Top of Rack (ToR) switch configurations?
- Question #29
A Stretched VxRail cluster is being designed with four nodes per site, for a total of eight nodes. How many sites are required for this configuration?
- Question #30
When resetting a Dell PowerEdge-based VxRail node to an existing factory image, which boot device should be selected?
- Question #31
What is a requirement for Top-of-Rack (ToR) switches when deploying a VxRail cluster?
- Question #32
In which VxRail node model is the iDRAC 'NIC Selection Setting' set to LOM1?
- Question #33
What VxRail model is designed to support graphic intensive VDI workloads?
- Question #34
During the installation of a new VxRail cluster, where is System Time configured?
- Question #35
After powering on Dell PowerEdge-based VxRail nodes, what defines the primary node of the cluster being configured?
- Question #36
In a VxRail deployment with an external vCenter Server, which VMware component(s) is automatically licensed?
- Question #37
A planned VxRail deployment will use an external vCenter Server and syslog server. Which ping connectivity tests should succeed and which should fail before the deployment?
- Question #38
Which vSAN license is included with VxRail?
- Question #39
After a successful installation, where in VxRail Manager should you collect logs?
- Question #40
A customer requires a VxRail Stretched Cluster with E560F nodes in its minimal configuration. In addition, the cluster should be able to use both erasure coding options. Which setu...
- Question #41
An existing Dell EMC customer wants to deploy a new VxRail cluster on premise. Each node of the new cluster will be configured with a single disk group containing one 1.6 TB Flash...
- Question #42
What software component is part of the VxRail Operations and Management Stack?
- Question #43
What is the maximum number of nodes in a VxRail cluster when using 1 GbE links?
- Question #44
Which block of IP addresses that is provided by the user to the VxRail Initialization wizard may contain noncontiguous addresses?
- Question #45
You are designing a VxRail Stretched Cluster for a company with two datacenters. The primary datacenter will host all the workloads, the secondary datacenter will be for disaster r...
- Question #46
After finishing the rack and stack of a VxRail Model G410 cluster, in which sequence should the nodes be powered on?
- Question #47
In what range does the VxRail Manager Health indicator show "yellow" for IOPS, CPU, and memory usage?
- Question #48
How long is the grace period for the vSphere evaluation licenses in a new VxRail implementation?
- Question #49
A Secure Remote Services deployment on a VxRail system with external vCenter fails with "Invalid target datastore specified". What is required to resolve this problem?
- Question #50
Which tool is required to re-image a VxRail G560F system?