CWDP-303 Exam Questions

After surveying for the ideal mounting locations for APs, you have been asked to compromise RF propagation optimization due to aesthetic concerns raised by your customer. In the en...

When deploying long-distance 802.11 bridge links (10 miles / 16 km), what parameter may be critical for improving data flow by reducing retries caused by the long distances?

One of your customers plans on providing wireless coverage to a warehouse facility. After performing an initial walkthrough, you collect the following information: - The central pa...

Which definition correctly describes the "local MAC" variation of the centralized WLAN architecture?

When a WLAN controller transmits an Ethernet frame that has an IEEE 802.11 frame as its payload to a lightweight AP, what type of QoS marks can be applied to the Ethernet frame and...

In a centralized WLAN architecture, what new problem may arise when you change the data forwarding model from centralized to distributed? (Choose 2)

Your customer location is equipped with DAS, originally deployed to relay a GSM signal indoors and provide 802.11 data coverage to static stations. What type of wireless applicatio...

According to WLAN security design best practices, what is true of the EAP properties shown in the exhibit?

Given: Use Exhibit 1, 2, and 3 to answer the question. The azimuth and elevation charts for which type of antenna are shown in Exhibit 1?

In a manufacturing facility with highly reflective materials, you are planning an upgrade to your existing 802.11b solution. You have chosen a dual-band 802.11n infrastructure prod...

When designing a WLAN to support voice in a large office, which design element is of the highest concern for performance?

What is the minimum PoE budget needed on a switch to support 6 (six) APs that can only be powered using IEEE 802.3at if no other details are provided?

In high-density environments, such as stadiums and convention centers, what extra factor has to be taken into account that can attenuate Wi-Fi signals when these environments are h...

What document is typically created to launch a project?

Your new customer is concerned about maintaining privacy for their proprietary information when you conduct information gathering for their WLAN design. Which document can you use...

What metric implements the simplest algorithm and lowest accuracy in networks requiring locations?

Your customer is using PSK as their only authentication. They have an industry requirement to move to a stronger solution. Your recommendation is to move to a certificate-based typ...

A company wants to connect its headquarters to its remote office that is 13 kilometers away using a wireless bridge. What requirement must not be forgotten by their Wireless Engine...

You are conducting a physical site survey where heavy machinery is repaired. What is a common item required specifically for this type of survey?

A business traveler from North America is in Europe. The hotel only provides coverage in 2.4 GHz. The traveler connects to the hotel's SSID and notices an AP in the hotel room. How...

A museum wants to offer Wi-Fi to its visitors. One of their requirements is to have the APs blend into the design of the museum. What should you do to meet this requirement?

An engineering firm just upgraded their WLAN form nine 802.11n APS to nine 802.11ac APs. After this upgrade, they did not see any improvement in throughput. What is the most likely...

You and 10 other people are connected to a public hotspot. You issue a ping sweep on the network, but you can't find any devices on the same subnet as yours. What feature might be...

During an RFP analysis, one of the vendors mentioned that you'll need to upgrade your Gigabit Ethernet switches to MultiGig switches to ensure support for 802.11ac and 802.11ax, wh...

A customer is acquiring a new VoWLAN system to replace their existing wired phone system. When reading about his system's requirements, you learned that is requires 25 db of SNR to...

You're about to deploy an Enterprise-class VoWLAN infrastructure. You need to ensure that QoS is properly configured throughout the network. What Access Category (AC) should voice...

After importing a floor plan to a predictive design tool, what should be done prior to adding APs, antennas and attenuators (e.g., walls)?

Your customer's 802.11n laptops are not able to see the SSID in the 5 GHz band in the conference room. When doing a walkthrough using one of these laptops, you confirm that it is u...

When designing a static channel plan for an office using voice devices near an airport, which range of channels should be avoided to ensure optimal performance when implemented?

What is the most suitable antenna option to be used when designing a WLAN infrastructure with APs mounted on a ceiling with a height of more than 20 feet and having all of the clie...

When using a predictive design tool, you have selected APs with an antenna gain 3 dBi and set the transmit power of the predicted APs to 25 mW. What should be EIRP of the APs in th...

Switches and APs have already been chosen by your customer. All switches support 802.3bz MultiGig interfaces and APs are 4x4:4 802.11ac wave 2 capable of using dual-5GHz and have o...

When surveying an existing WLAN infrastructure for a possible redesign, you use two Wi-Fi USB adapters to collect RSSI data and two USB spectrum analysis adapters to collect RF spe...

What is the most cost-effective way to accurately measure the height of a ceiling when ladder use is not allowed?

You performed a site survey with two USB Wi-Fi adapters using a special driver written for the site survey software. After deployment, you realized that the client devices used by...

When performing an active site survey in an existing WLAN infrastructure, in addition to gathering throughput data, what other important function will you typically be testing at t...

Why should band steering algorithms allow stations to connect to the 2.4 GHz band after some number of ignored Probe Requests?

After designing a WLAN infrastructure using predictive design software. What's the best way to validate the predictive design in the physical space before deployment, if time and b...

Your customer requires a security solution in which client credentials are used and the authentication server must have a certificate with optional client certificate use. Which EA...

Your customer requires fast secure roaming. Which two types of roaming are specified in 802.11- 2016 FT roaming that will help meet this goal?

What advantage provided by 802.11n and 802.11ac is not usable in 1X1:1 low-end client devices?

When deploying APs outdoors, what additional component needs to be used that is not needed indoors?

Which document provided to your customer should include all devices and parts that are going to be used during the deployment of their WLAN infrastructure?

What limitation exists when WMM is not enabled on an 802.11n WLAN?

Using a SCA means that all APs will be using the same channel in a given layer. How is the AP with which the client associates determined?

What service must be implemented on your customers' network to authenticate users against an LDAP database prior to access to the WLAN infrastructure being granted?

What is the best method of gathering attenuation measurements from any building materials or objects?

Which type of authentication and encryption method is mandatory for Voice Enterprise certified devices as specified by the Wi-Fi Alliance?

What document should be created that provides instructions for install technicians to mount and configure APs?

In addition to a copy of your design, which tools should you use to ensure the installation team deploys APs where you have them designed to be located?