State the LSL and USL for the above process. Answer: LSL = 5.95 and USL = 6.05

The correct answer is A. LSL = 5.95 and USL = 6.05. Option A is correct because in quality control, the Lower Specification Limit (LSL) and Upper Specification Limit (USL) define the acceptable range for a process output. Given a target value of 6.00 with a tolerance of ±0.05, the LSL is calculated as 6.00 − 0.05 = 5.95 and the…

Measure Phase

Question

State the LSL and USL for the above process. Answer:

LSL = 5.95 and USL = 6.05

Options

ALSL = 5.95 and USL = 6.05

How the community answered

(48 responses)

A
100% (48)

Explanation

Option A is correct because in quality control, the Lower Specification Limit (LSL) and Upper Specification Limit (USL) define the acceptable range for a process output. Given a target value of 6.00 with a tolerance of ±0.05, the LSL is calculated as 6.00 − 0.05 = 5.95 and the USL as 6.00 + 0.05 = 6.05. Since this question presents only one option, the focus is on recognizing how specification limits are derived from a nominal target plus and minus the allowable tolerance.

Memory tip: Think of LSL and USL as the "floor and ceiling" of acceptability - subtract the tolerance from the target to get the floor (LSL), add it to get the ceiling (USL). The formula is simply: LSL = Target − Tolerance and USL = Target + Tolerance.

Topics

#LSL#USL#specification limits#process capability

Community Discussion

No community discussion yet for this question.

Full CSSGB Practice