3601 Exam Questions

What is the maximum number of power supplies possible in a VSP 9000 chassis?

After a reset patch is applied on a VSP 9000, what happens by default, if the software patch commit command is not executed?

A technician is working on a VSP 9000 and trying to determine why IST in not coming up, even though it is enabled. The configuration looks good. What should he checked next?

VSP 9000 fast re-route technology extends over the IST to include all of the local and remote ports in the switch pair. How are link state message carried between the switch pair?

How does the VSP 9000 avoid loops related to MAC addresses?

A technician is troubleshooting traffic problems on a VSP 9000 and finds that Spanning Tree Protocol (SIP) is blocking the MultiLink Trunking (MLT) ports. How can this problem be s...

With an ACL being identified by a unique system wide ACL ID in the range of 1-2048, what does the number 2048 represent?

In a VSP 9000 Open Shortest Path First (OSPF) configuration, how can the technician ensure the avoidance of excessive shortest path calculations?

How does a technician access Flight Recorder functionality?

During a software image upgrade, how does the VSP 9000 identify the release to be activated?

A team of Engineers were tasked to install and configure a large network, consisting of VSP 9000 as the core and number of distribution clusters of VSP 9000 and ERS 8800/8600, VLAN...

Which service class addresses delay-sensitive traffic?

Whit must be loaded or created on the VSP 9000 to use SNMPv3 with Data Encryption Standard (DES) or Advanced Encryption Algorithm (AES) to access the switch?

There is indication of traffic loss in the VSP 9000. What is the first thing a technician should do to determine the cause of this problem?

A technician is looking Into a possible IST problem on a VSP 9000 that is running SMLTv2. Given the difference between SMLTv2 and SMLTv1, which statement describes an issue to be c...

A technician is configuring default and static routes on a VSP 9000. What is required for the default or static route to appear in the routing table? Avaya 3601 Exam

In the event of a critical process crash on a CP module, which file or log is written to disk?

In the VSP 9000 software, preferences can be configured to determine the precedence given to one type of route over another. What is required to modify the preference for a static...

A technology is investigating traffic loss, and has seen that traffic counters are not increasing on the primary VSP 9000. What can be done to ensure the correct ports are in Multi...

A technician is configuring a VSP 9000 to run in High Availability (HA) Mode, and needs to set the Open Shortest Path First (OSPF) hello timers. What is the recommended setting?

In the event of a critical process crash on a CP module, when is CP switchover initiated?

Equal Cost MultiPath (FCMP) routes apply to Open Shortest Path First (OSPF), Routing Information Protocol (RIP), Border Gateway Protocol (BGP), Default and Static routes. With ECMP...

Which multicast activity should be configured on the edge?

During a VSP 9000 boot up, the following log message appears: "Powering off card in slot 12 due to a low power condition." Which statement describes how that card is brought back i...

Routers can learn several routes to a given destination network through several protocols. Which part of the VSP 9000 uses the host route?

On a VSP 90O0, Just as VLANs am unique within the system, a Virtual Routing and Forwarding (VRF) is unique. How many VRF instances can a VLAN be associated with?

Buffer wrap is a variable of the Packet Capture Tool (PCAP) enable command, and by default it is set to true. Which statement describes what buffer-wrap does when it is set to true...

To reduce the number of active neighbor adjacencies, what can a technician configure on the VSP 9000 with Open Shortest Path First (OSPF)?

Where is the VSP 9000 log file configured?

If you use a Layer 3 Split MultiLink Trunking (SMLT) client switch without a routing protocol, configure two static routes to point to both Routed Split MultiLink Trunking (RSMLT)...

Which VSP 9000 LEDs are indicated by arrow number 1 in the exhibit? Avaya 3601 Exam

Why occasionally use static routes in a VSP 9000 configuration?

Which statement describes how the access services to the VSP 9000 can be enabled or disabled? Avaya 3601 Exam

A technician is generating an SSH key on a VSP 9000 equipped with a secondary CP module. How can the technician make sure the key also saves to the secondary CP?

Which statement about configuring RADIUS authentication on the VSP 9000 is true?

The network was scheduled for some additional network configuration in the distribution and core switch clusters. The engineer completed the configuration and tested the additional...

Which practice does Avaya highly recommend to reduce the load on the Packet Capture Tool (PCAP) engine?

A customer has VSP 9000, and wants to switch from High Availability (MA) Mode, also called Hot Standby, to Warm Standby. Which reboot is required after a switch between modes?

A technician has isolated the source of trouble on the VSP 9000 to slot 6, and needs to get the records associated with that slot. Which command captures those records?

Which two are functional elements of the VSP 9000 Flight Recorder? (Choose two.)

A technician is configuring a port-based ACL, and has created the ACL and set the default actions. What is the next step?

A customer is running the VSP 9000, and has enabled the RADIUS password fallback feature. A user is trying to log in using CLI, but the RADIUS server is unavailable or unreachable...

A technician is using Avaya Visualization Performance and Fault Manager (VPFM) to determine the number of managed devices that the company has permission to discover and monitor, b...

Which feature makes it possible for the VSP 9000 architecture to have a significant cost advantages over the traditional backplane design?

In a switch cluster, if one of the switches was inadvertently reset to the factory default, how should Virtual Link Aggregation Control Protocol (VLACP) be configured to protect th...

Where does Flight Recorder store requested data for offline analysis?

A technician is enabling SSH-2 in secure mode on a VSP 9000, and also wants to allow SNMP access. Which statement about SNMP access is true?

In a VSP 9000 Open Shortest Path First (OSPF) configuration, how can the technician ensure the avoidance of excessive shortest path calculations? Avaya 3601 Exam

A technician is configuring Open Shortest Path First (OSPF) on a VSP 9000, and is using this formula shown in the exhibit to determine the OSPF Link State Advertisement (LSA) limit...

Avaya recommends enabling Simple Loop Prevention Protocol (SLPP), with a threshold of 5, as added protection against possible loops in the core. Where is SLPP enabled?