350-050 · Question #125
After performing a wireless site survey, you determine that to achieve proper HR-DSSS coverage within the rooms along a hallway area, the AP radios that service the hallway must be at 12 mW or…
The correct answer is C. Configure the minimum power-level assignment to 11 dBm under the global 802.11b/g/n TPC settings. F. Statically configure the 2.4 GHz radios on the hallway APs to power level 4. See the full explanation below for the reasoning.
Question
After performing a wireless site survey, you determine that to achieve proper HR-DSSS coverage within the rooms along a hallway area, the AP radios that service the hallway must be at 12 mW or higher. After the APs are all installed, you note that RRM is decreasing the power on the AP radios in the hallway to 6 mW. Which two methods can you use to prevent the HRDSSS AP radio power levels from dropping below 12 mW? (Choose two.)
Options
- AConfigure the minimum power-level assignment for the 2.4 GHz radio to 11 dBm under the individual
- BConfigure the minimum power-level assignment for the 5 GHz radio to 11 dBm under the individual TPC
- CConfigure the minimum power-level assignment to 11 dBm under the global 802.11b/g/n TPC settings.
- DConfigure the minimum power-level assignment to 11 dBm under the global 802.11a/n TPC settings.
- EStatically configure the 5 GHz radios on the hallway APs to power level 4.
- FStatically configure the 2.4 GHz radios on the hallway APs to power level 4.
How the community answered
(23 responses)- B9% (2)
- C74% (17)
- D4% (1)
- E13% (3)
Community Discussion
No community discussion yet for this question.