nerdexam
Cisco

300-430 · Question #246

What is an indication of having multiple wireless controllers within the same CAPWAP multicast group?

The correct answer is B. Multicast traffic is increased throughout the network.. When multiple wireless controllers share the same CAPWAP multicast group address, each controller independently floods multicast traffic to that group, causing a net increase in multicast traffic across the network.

Multicast

Question

What is an indication of having multiple wireless controllers within the same CAPWAP multicast group?

Options

  • AMulticast packets are rate-limited to 128 kbps.
  • BMulticast traffic is increased throughout the network.
  • CACL filtering are used on the first hop router on all VLANs.
  • DCAPWAP packets are fragmented.

How the community answered

(47 responses)
  • A
    4% (2)
  • B
    70% (33)
  • C
    9% (4)
  • D
    17% (8)

Why each option

When multiple wireless controllers share the same CAPWAP multicast group address, each controller independently floods multicast traffic to that group, causing a net increase in multicast traffic across the network.

AMulticast packets are rate-limited to 128 kbps.

Rate-limiting multicast to 128 kbps is a configured policy decision, not a symptom or indication of multiple WLCs sharing a CAPWAP multicast group.

BMulticast traffic is increased throughout the network.Correct

In a CAPWAP multicast deployment, each WLC sends multicast packets addressed to the shared group address. If multiple controllers are configured with the same multicast group, every controller floods its own copy of multicast traffic into the network, resulting in duplicated and overall increased multicast traffic throughout the infrastructure.

CACL filtering are used on the first hop router on all VLANs.

ACL filtering on first-hop routers is a multicast control measure, not an observable indication that multiple controllers belong to the same CAPWAP multicast group.

DCAPWAP packets are fragmented.

CAPWAP packet fragmentation is caused by MTU mismatches in the network path, not by the number of controllers sharing a multicast group.

Concept tested: CAPWAP multicast group traffic behavior with multiple WLCs

Source: https://www.cisco.com/c/en/us/support/docs/wireless/4400-series-wireless-lan-controllers/108589-multicast-wlc.html

Topics

#CAPWAP multicast group#multiple WLCs#multicast traffic#multicast overhead

Community Discussion

No community discussion yet for this question.

Full 300-430 Practice