220-301 Exam Questions

How many pins does a standard IDE cable have?

DIMMs come in which two pinout styles? (Select TWO)

After relocating a Wireless IrDA (infrared data association) printer, a user reports that his laptop can no longer print to the printer. What is the MOST likely cause of this probl...

A customer has a computer that currently has a 4 GB hard drive and wants to upgrade to a 20 GB hard drive. After installing the new hard drive, only 8 GB of the new hard drive is r...

The A+ Certified Technician is asked to install a device that requires USB 2.0 in a desktop system. The system only supports USB 1.1. What should the A+ Certified Technician do?

What causes chip creep? ActualTests.com

A user is upgrading the memory on a notebook and needs to know what type to order. The user opens the notebook and sees a single notched board that is roughly 7 cm in length. Which...

How can the IDE hard drive be set to use a specific connector on the cable?

If a computer is NOT protected with a UPS (uninterruptible power supply), what can happen when power is restored after a power failure?

Which of the following protocols uses a variable length name defining each workstation?

A user turns on a computer in the morning and hears several beeps, a slight fan, and hard drive sounds. There is no other observable computer activity. What should the technician d...

What is the purpose of a Peer-to-Peer network?

The A+ Professional upgrades the operating system on a PC to Windows 2000. The system has a Pentium III 500 MHz processor, 64 MB of RAM, and a 10 GB ATA hard drive. Under normal ci...

An A+ Professional is installing two new SCSI hard drives in a server. After connecting the drives there is an error and the drives are NOT recognized correctly when the server boo...

An Ultra DMA 33 or ATA ATAPI 4 hard drive requires which type of cable?

A client asks a technician to recommend a removable media solution for several computers. The client needs to periodically send one file to satellite offices. The file size is betw...

When booting up the computer, the error message "CMOS Memory Size Mismatch" is displayed. What are two possible explanations for this? (Select TWO)

What is one of the MOST common causes of ESD (electrostatic discharge)?

Which property is inherent in the laser printing process when the paper is subjected to heat by the fuser?

Upon boot up, the PC reports a parity error. What is the MOST likely cause of this error message?

What is the proper boot sequence of a computer if it must have a blank floppy disk in its system for a particular application?

Which processor does the Slot A Socket accept?

What is the minimum category of cabling for 100 Mbps Ethernet?

A user complains about floppy disks losing information stored on them. The technician notices a stack of floppy disks on top of an old VGA monitor. What is the MOST likely explanat...

Which three of the following devices require an IRQ? (Select THREE)

Hard disks with _____ can improve PC performance.

What is the IEEE standard for FireWire?

What are two benefits of a UPS (uninterruptible power supply) with AVR (automatic voltage regulation)? (Select TWO)

Which type of cable is MOST likely in use with RJ-45 connectors to attach computers to the network?

What enables hot swap capability for a laptop PC Card?

A client has to reset the system clock each time the system powers up. The system also exhibits problems during the system POST. What is MOST likely causing this and what should th...

What are two typical speeds of Ethernet networks? (Select TWO)

Why can multiple SCSI devices work on the same channel?

Which section in CMOS has a configuration setting that can make the monitor turn off when the computer is idle?

What is the significant function of DMA?

CAT5 cable is what type of cable?

A hard drive is showing up as the Primary Slave instead of the Primary Master. What is the MOST likely cause of the problem?

What is a thermal compound designed to do?

Which kind of charge do toner particles have?

With which connector is the Pentium Pro Processor compatible?

How many hard drive(s) can be installed on a typical IDE channel?

What is the proper storage environment for Color Laser Jet imaging drums?

What should a technician do when a Laser printer is continuously jamming transparencies at the fuser unit?

Which two Parallel Port types allow for use of peripherals such as tape backups and disk drives? (Select TWO)

Which is the default IRQ for COM1?

What is one of the MOST common interfaces used by Laser printers?

How many IDE devices can be supported by a main board with 4 IDE channels?

Which settings stored by the BIOS can be changed by the operating system?

A user has two EIDE hard drives on the primary bus. On the secondary bus, the user has a DVD ROM and a CD-RW. The user wants to add another hard drive. How can this be accomplished...

Which network technology allows a NIC (network interface card) to transmit and receive data at the same time?