220-301 Exam Questions

Disposal of CRTs has become an issue because of the large amount of _____ they contain.

Which of the following printer technologies support color?

A Dot Matrix printer generates printouts that are good on the left side of the page but fade as the printing moves to the right side of the page. What is the MOST likely cause of t...

Hard disks with _____ can improve PC performance.

What is required when upgrading a Pentium III PC to a Pentium 4?

Which of the following is the BEST source of a dynamic workstation IP address?

What is the significant function of DMA?

Which two factors MUST be taken into account when upgrading the system motherboard? (Select TWO)

A client asks a technician to add a DVD+R burner to a computer system. The technician does this and successfully tests the drive. Three weeks later, the client calls and says that...

A customer states that after someone borrowed a computer, a larger than normal black border appeared around the edge of the screen image. What is the MOST likely explanation?

Hard disks with _____ can improve PC performance.

Which connector is used to connect a Dial Up modem to the WAN (wide area network)?

Disposal of CRTs has become an issue because of the large amount of _____ they contain.

A hard drive is showing up as the Primary Slave instead of the Primary Master. What is the MOST likely cause of the problem?

What is the minimum number of drives required for RAID Level 5?

A user wants to upgrade a computer system using two 256 MB PC 800 RIMM, to have 1024 MB total capacity. Which of the following would be the preferred memory upgrade?

Which method is used to safely clean LCD computer screens?

A client asks a technician to add a DVD+R burner to a computer system. The technician does this and successfully tests the drive. Three weeks later, the client calls and says that...

For a generic desktop computer, what does one short beep after the unit completes POST ActualTests.com indicate?

What is the approximate data upload speed of a DSL connection?

Which of the following is the MOST important step when upgrading the BIOS?

Which device translates wired signals to Wireless signals to allow a Wireless device to connect to a traditional network?

A new Pentium 4 PC consistently switches off during startup without displaying a warning. What might be the reason?

Which cable is used to connect a cable modem to the WAN (wide area network)?

Which Internet communication technology uses the same copper lines that phone systems use with connection rates up to128 Kbps?

Which cable type provides the LEAST possibility of EMI (electromagnetic interference) in a network?

There is a music CD playing in the CD-ROM of a PC. However, there is no music coming from the speakers. The technician verifies that the volume is up on the speakers, and in the so...

A client has a computer running Windows XP, 128 MB of RAM, 2.4 GHz processor, an 80 GB hard drive and is using a USB scanner to scan images. The client complains that the processin...

A client is shopping for a PDA (personal digital assistant) that will synchronize with a laptop. Which three of the following are possible interfaces for PDAs? (Select THREE)

Which I/O Port does the Secondary IDE controller use?

In what environment is ESD (electrostatic discharge) MOST prevalent? ActualTests.com

After inserting a floppy disk and accessing the A drive, the error message "Drive A Not Ready. Abort, Retry, Fail" appears. What are two possible causes of this error? (Select TWO)

A 144 pin memory module is MOST commonly used in which type of device?

Which of the following is the MOST important step when upgrading the BIOS?

Which three components are MOST likely to cause repeating defects on a printed page? (Select THREE)

Which of the following is an 8-wire connector commonly used on a 10BaseT LAN (local area network)?

What is the pin count of a Socket A?

How many 168 pin DIMMs are required per memory bank?

The output from a Laser printer is repeatedly marked at equally spaced positions on every page. What is the MOST likely cause of this problem?

A customer's Windows Desktop on the monitor appears to be distorted. What are two actions the technician should take to try to isolate the problem? (Select TWO)

Where is firmware typically stored?

How many pin contacts are on a RIMM module?

What information is important to know before installing an ISA modem? (Select TWO)

What does the term AGP mean?

Which color-code is used for the Mouse Port on a new PC that uses a DIN 6 connector?

A user has a Pentium class system board with a built-in hard drive controller. The user decides to upgrade the hard drive and purchases a 10 GB ATA 100 drive. The drive is installe...

How many pins does an RJ-11 connector have?

What does a "201" error indicate during POST?

Which two of the following should be disconnected when working inside a PC to prevent electrical shock? (Select TWO)

A PC already has a hard drive (HD1) and a CD-ROM on the Primary IDE channel. A second hard drive (HD2) is now needed. Which configuration keeps data transfers at a maximum?