1Z0-597 Exam Questions
70 real 1Z0-597 exam questions with expert-verified answers and explanations. Page 1 of 2.
- Question #1
You have set up several guest domains on a SPARC T4 server. Which operating system(s) are supported in these guest domains?
- Question #2
System errorscan go undetected by the Oracle VTS test, since many are detected, managed, and reported by Oracle Solaris Predictive Self-Healing. What is one way to display these er...
- Question #3
During the acclimatization process, what is the maximum positive or negative temperature gradient that is permitted for multi-layer boards?
- Question #4
The SPARC T4-2 server has ___________ than the SPARC T4-1 server.
- Question #5
On a SPARC T4 server running Oracle Solaris 11, you execute the following: % beaddm create alt_krit What is the result?
- Question #6
How many XAUI (10 GbE Attachment Unit Interfaces) ports are provided per SPARC T4 processor?
- Question #7
Identify two specification of the Enterprise Installation Standard (EIS) for Basic Solaris.
- Question #8
As part of our test procedure plan, you need to confirm that savecore is configured correctly. Which test should you use?
- Question #9
You have the Oracle ILOM keyswitch_state=standby. What is the Impact ?
- Question #10
You are troubleshooting an installation and have run Oracle Explorer Data Collector. What should you do with the output?
- Question #11
To disable ILOM CLI session time-out, which command should be used?
- Question #12
After the Logical Domains Manager has been installed, what happens to the original system and instance of Oracle Solaris?
- Question #13
According to the Enterprise Installation Standards (EIS) on electrical grounding, what is the benefit of additional grounding points?
- Question #14
What is out-of-order execution?
- Question #15
A power supply fails on a SPARC T4-4 server and a replacement is not available. What should you do?
- Question #16
During an installation, you have selected two disks to be used for your ZFS root pool. What is the impact?
- Question #17
When setting up Oracle VM Server for SPARC on a SPARC 14 server, you did not remove unneeded PCIe devices from control (primary) domain. What is the impact?
- Question #18
In the OpenBoot PROM environment, you used the"show-children" commandto list the physicaldrives on a specific RAID controller.Theoutput is below. Which command creates a RAID0 volu...
- Question #19
The _________ runs its own embedded operating system.
- Question #20
In order to consolidate the applications on a SPARC T4 server, you require virtual machines that run an independent operating system instance. Which virtualization technology did y...
- Question #21
In planning for the installation of a SPARC T4 server, you notice that a more recent version of a patch is available than what is currently on the EIS-DVD. According to the Enterpr...
- Question #22
The customer wants power-on self-test (POST) to be triggered any time power is applied, or there is an error-invoked reset. How is this best accomplished?
- Question #23
During installation, what happens if both power supplies are not cabled at the same time on a SPARC T4-2 server?
- Question #24
During an installation of a SPARC T4-2 server running Oracle Solaris to, you noticed several missing packages and drivers. What caused this?
- Question #25
Power-on self-test (POST) detected a faulty core on a SPARC T4-2 server. The server supports an important internal application for the customer. What is the state of the applicatio...
- Question #26
Why are Electrostatic Discharge (ESD) "softfailures" the most serious type of failures?
- Question #27
You plan on creating a RAID volume to mirror the system disks. After you have selected a controller, what fcode command should be run to list the physical drivers on the controller...
- Question #28
Error conditions by POST, Oracle Solaris Predictive Self-Healing (PSH), and Oracle ILOM are forward to which component for fault handling?
- Question #29
On SPARC T4-2 server, if the memory riser has four dual-rank DIMMs, its bandwidth is approximately 94% of the possible maximum. If the memory riser has only two dual-rank DIMMs, wh...
- Question #30
According to the Enterprise Installation Standards (EIS), what is the recommended minimum amount of memory that should be allocated to the control domain?
- Question #31
How is I/O access configured for logical domains with no physical I/O access?
- Question #32
You are running Oracle Solaris on a SPARC T4 server and wish to enable network traffic control and guest domains. What action needs to be performed?
- Question #33
Which two statements are true regarding the Stream processing Unit (SPU) on the SPARC T4 processor?
- Question #34
You have set up power on self test (POST) to run when the scrvrr has been reset by the user. The customer would like POST to run any error-invoked reset. How is this accomplished?
- Question #35
The DIMM slots on a SPARC T4-1 server are currently 1/4 full (i.e., 4 out of 16 DIMM slots are populated).You plan to add four additional DIMMs. How are they installed?
- Question #36
In general, when labeling a cable, the host connection should follow the format: <system name> <board no.> <slot no.> and _____________.
- Question #37
You are installing a SPARC T4 server at a customer site using a single-phase power feed. The power outlet is 15 meters (16.4 feet) from device. Which Enterprise Installation Standa...
- Question #38
Which command lists dynamically reconfigurable hardware resources and shows their operational status?
- Question #39
You are unable to add an Oracle ILOM user account, what is one possibility that would cause this issue?
- Question #40
In the following example, Power OnSelfTest(POST) reports an uncorrectablememory error affectingthe following locations: /SYS/PM0/CMP0/B0B0/CH1/D0 /SYS/PM0/CMP0/B0B1/CH1/D0 The erro...
- Question #41
According to the Enterprise Installation Standards (EIS), what is the minimum amount of time SunVTS should be run?
- Question #42
Below is a list of boot environments available on a SPARCT4 server running Oracle Solaris 11. Which boot environment is currentlybooted?
- Question #43
You have printed the partition(slice) informationfor a disk. What type of labeldoes it have?
- Question #44
You need to establish a remote secure shell (SSH) connection to Oracle ILOM. How do you enable SSH during the initial installation of the server?
- Question #45
What is Critical Thread Optimization?
- Question #46
You have configured DNS and have determined that the services processor serial number for your target server is 0641AMA007. What is the host name of this server?
- Question #47
You are trying to reach the OpenBoot prompt (ok) from Oracle Solaris on a SPARC T4-1 system running Oracle VM Server for SPARC. The OpenBoot firmware is not available. Why is the O...
- Question #48
Using the logical domainconfiguration below,what is the domain and virtual CPU corresponding to physical CPU number 5?
- Question #49
Which two tasks are required to install and configure Oracle VM Server for SARC Management Information Base (MIB) software?
- Question #50
During the initial installation of a SPARC T4-2 server, you notice the SP NET MGT port is not available. What is one possibility?