1Y0-A21 Exam Questions
156 real 1Y0-A21 exam questions with expert-verified answers and explanations. Page 1 of 4.
- Question #1
Which SNMP trap must an administrator configure to be informed when the response time for a monitor probe that had exceeded the set threshold returns to normal?
- Question #2
An administrator has executed the following commands: - enable ns feature lb - add service 11.1.1.1 HTTP 80 - add service 121.1.1.2 HTTP 80 - add lbvserver1 HTTP 1.1.1.3 80 However...
- Question #3
The expression "url == *.txt || res.http.header content-encoding == text/html" can be used for __________ and __________ actions. (Choose the two action types that correctly comple...
- Question #5
What can an administrator configure to perform a health check for a SVC1,which is transferring HTTPS traffic so that a probe is only sent when there is no traffic to the server?
- Question #6
Which trap can an administrator set on a NetScaler system so that an alert is sent whenever an SNMP management application that does NOT have access privileges attempts to access a...
- Question #7
Scenario: A network administrator working with two NetScaler systems has encountered an issuewithHA. The administrator notices that HA synchronization is failing. The administrator...
- Question #8
Scenario: An administrator finished installing a NetScaler appliance and configured a load balancing virtual server that has four services bound. The configured toad balancing meth...
- Question #9
When leveraging the Dashboard, which information would indicate to an administrator that server performance has been improved after caching m a network environment?
- Question #10
Scenario: An administrator has set up four Webserversfor toad balancing. The administrator wants to monitor the response codes from the site todeterminewhether the site is up. The...
- Question #11
How can an administrator configure a health check for a server receiving HTTP traffic so that it monitors the responses of the server to actual client requests as opposed to probes...
- Question #12
Scenario: An administrator is planning the deployment of a NetScaler system for a large banking Citrix 1Y0-A21 Exam corporation. The bank has very stringent Internet security polic...
- Question #13
Scenario: An administrator is working with a Citrix consultant to architect and implement a NetScaler solution. They plan to use GSLB and DNS views in the environment. In which two...
- Question #14
Scenario: An administrator is working within a network environment as depicted in the attached exhibit.The NetScaler system in this HA pair need to exchange heartbeat packets over...
- Question #15Configure Streaming and Boot Methods
Scenario: A company has contracts with multiple ISPs and would like to use all of them for Internet connections although some ISP routers are faster than others. The company also p...
link load balancingISP failoverdestination IP persistenceRNAT - Question #16
A network administrator wants to ensure that connection multiplexing is enabled for all client connections that hita virtual server.Which service type should the administrator sele...
- Question #17
Scenario: A customer has two datacenters in geographically dispersed locations, both serving content for a web-based application. Content for both data centers should always be ava...
- Question #18
Scenario: An administrator needs to create a health check that will mark an HTTP service down if the bound monitor probe fails. The administrator wants to create a monitor and conf...
- Question #19
Scenario: A network administrator has set up two NetScalers in HA. However, when the administrator checks the HA nodes, the secondary unit shows as DOWN Details were gathered from...
- Question #20
Scenario: An administrator is configuring two NetScaler systems in an HA pair. The administrator configured LDAP Authentication to allow domain administrators to manage the NetScal...
- Question #21
Scenario: An administrator has set up a NetScaler in HA mode and now wants to bind the SSL certificate to one of the SSL virtual servers. However, the administrator notices that th...
- Question #22
Scenario: A customer logged in as a user with superuser access rights and is making configuration changes on a NetScaler HA pair. After a few minutes, the customer notices that the...
- Question #23
Scenario: An ISP provides SaaS to enterprise customers as part of a cloud offering. A NetScater is configured to support multi-tenant deployments.Traffic isolation for each enterpr...
- Question #24
An administrator set up a NetScaler pair in HA but later noticed that the configuration changes made on the primary node were NOT synchronized with the secondary node. Which config...
- Question #25
Scenario: An administrator needs to configure a NetScaler device so that a set of back-end servers in a LAN can initiate connections to the internet ACLs areconfigured in this envi...
- Question #26
What must an administrator configure when adding a new SNMP manager to a NetScaler Configuration Utility?
- Question #27
Scenario: An administrator is planning a software upgrade of a NetScaler HA pair from NetScaler version 8.1 Standard Edition to version 9.2 Enterprise Edition inorder to take advan...
- Question #28
An administrator needs to configure a NetScaler system in a manner that will increase the capacity and availability of a signal communication channel between the NetScaler and anot...
- Question #29
When planning a deployment, in which setup scenario must an administrator configure the NetScaler system as the default router for the servers in the environment?
- Question #30
Anadministrator must first enable the________ feature beforea URL transformation policy can be used in a network environment. (Choose the correct option to complete the sentence)
- Question #31
An administrator needs to configure a NetScaler-owned IP address for server-side connections in an environment in which USNIP mode is globally enabled on me NetScaler system. Which...
- Question #32
Scenario: An administrator has created and configured services on load balanced virtual servers.The administrator then enabled the compression feature on a NetScaler deployment usi...
- Question #33
Scenario: An administrator is configuring a NetScaler system in one-armed mode The administrator has connected the NetScaler appliances to the network through a switch and will soo...
- Question #34
An administrator has noticed a degradation in performance from the Web servers when delivering secure web applications in the network environment. Assuming a NetScaler system is de...
- Question #35
What should an administrator configure on a NetScaler to remove server-side compression and enable compression on the NetScaler?
- Question #36
Which two options can an administrator leverage when setting the nsroot password during the initial setup of a NetScaler system? (Choose two) Citrix 1Y0-A21 Exam
- Question #37
Scenario: An administrator in attempting to force synchronization between two nodes in an HA setup. Once the synchronization is complete,the administrator receives a <Done>message....
- Question #38
Scenario: An administrator would like to set an organization's homepage search engine type to display differently based on a user's browser. If a user accesses the homepage from an...
- Question #39Install and Configure Provisioning Server 5.0
Scenario: A new network administrator has been hired for an organization that already has a NetScaler system in place. The new administrator wants toleverage existing application t...
application templatesNetScaler configurationpublic endpointsback-end services - Question #40
Scenario: An administrator has set up the configuration of an HA pair so that each NetScaler application has four connections interfaces. In addition, two pairs of interfaces for e...
- Question #41
Scenario: An administrator must configure a new NetScaler 9.2 deployment at a large organization. The administrator must use the following information when configuring the NetScale...
- Question #42
In order to prevent configuration errors from typographical errors and to streamline the creation of expressions, an administrator should leverage______when creating policies. (Cho...
- Question #43
Scenario: An administrator needs to configure services and vservers for connection-based content switching of transport control protocol traffic. The traffic must be decrypted by t...
- Question #44
Scenario: An administrator is configuring content switching to switch between static and dynamic requests. The administrator has completed the following: - Content switching featur...
- Question #45
An administrator wants to configure the virtual server and services so that existing connections stay open when a service is marked down but NOT when a virtual server is marked dow...
- Question #46
Which parameter cm a monitor specifies the consecutive number of successful probes required Citrix 1Y0-A21 Exam tomark a service as IF?
- Question #47
Which page is displayed to the user if a catch-all policy is NOT defined on a content switching virtual server configured on the NetScaler?
- Question #48
An administrator has just enabled caching and wants to make sure that this will positively impact server performance. Which information can the administrator get from the Dashboard...
- Question #49
An administrator wants to limit access to the NetScaler GUI and has configured ACLs to achieve this; however, everyone is still able to access the NetScaler administration tools. W...
- Question #50
What are the three best methods an administrator should use to load balance cache servers according to best practice? (Choose three.) Citrix 1Y0-A21 Exam
- Question #51
An administrator needs to configure a monitor to track the health of an IMAP service configured on a NetScaler system. Which type of monitor must the administrator configure to bac...