1Y0-240 Exam Questions

Scenario: A network engineer needs to re-configure the Citrix ADC to utilize two new VLANs - VLAN2 and VLAN3. VLAN2 is an untagged VLAN and VLAN3 will require a .1q compliant tag....

Why would an engineer want to specify a TCP Profile for a specific service group?

Scenario: The Citrix ADC is connected to two subnets. The NSIP is 10.2.9.12. The external SNIP is 10.2.7.3. The MIP for internal access is 10.2.9.3. Web servers, authentication ser...

Some SSL certificate files may be missing from a Citrix ADC appliance. Which directory should an engineer check to determine which files are missing?

How could an engineer configure a monitor to ensure that a server is marked as DOWN if the monitor test is successful?

A network engineer should use a HTTP-ECV monitor type to control the status of a load balanced web server resource when __________. (Choose the correct option to complete the sente...

Scenario: A network engineer has created and bound an UDP-ECV monitor to identify the status of a UDP service. However, no matter what the response is, the service is always marked...

While performing some re-cabling, a Citrix ADC engineer noticed that a power supply unit failed on a Citrix ADC appliance. What should the engineer enable to receive notification o...

A network engineer selected the option on a SSL certificate to provide notification upon expiration of the certificate; however when a certificate expires, NO notification is sent...

What type of protocol does AppFlow use for reporting?

A network engineer wants to collect performance statistics regarding the traffic between different points in the connection, specifically from client-to-Citrix ADC and from Citrix...

A network engineer has been tasked with identifying the cause of intermittent network connectivity issues. Which command should the engineer use to generate the necessary network i...

A Citrix ADC implementation is experiencing intermittent network issues, specifically regarding traffic to a back-end service associated with IP address 10.10.1.86. Which command s...

A network engineer needs to investigate why a few users have issues logging on to the Citrix ADC system. How can the engineer troubleshoot authentication issues on the Citrix ADC s...

Scenario: A Citrix ADC environment uses two-factor authentication and the second authentication method is AD. A user logs in to the environment but does NOT receive access to the r...

Scenario: Primary Citrix ADC (NS1) is licensed for 10000 Maximum ICA users and 305 Access Gateway users. Secondary Citrix ADC (NS2) is licensed for 10000 Maximum ICA users and five...

A client is trying to reach a back-end server with an IP address of 10.192.31.5 given the following routing table: Which route would the Citrix ADC use for this client?

A network engineer is testing a new load balancing virtual server "test" that has the service group "test-grp" bound to it. Which command could the engineer run to show connection...

A network engineer runs the following command: nsconmsg -K /var/nslog/newnslog -s nsdebug_pe=1 -d oldconmsg What is the engineer trying to check in the log?

A network engineer has enabled USIP and USNIP and set a unique IP address as the source IP using the proxyIP parameter on an INAT policy. Which is the correct order of precedence f...

A network engineer needs to prevent too many simultaneous HTTP requests that can cause a Denial Of Service (DDoS). What could the engineer enable to prevent too many simultaneous H...

Scenario: A Citrix Administrator has configured an Authentication, Authorization, and Auditing (AAA) action policy to allow users access through the Citrix ADC The administrator bo...

Scenario: A Citrix Administrator is configuring SNMP management on the Citrix ADC to receive alerts when something fails. The administrator was confident that the Manager, Alarms a...

Click on the 'Exhibit' button to view the screenshot of the command-line interface.

Which two configurations can a Citrix Administrator use to block all the post requests that are larger than 10,000 bytes in order to protect the environment against HashDoS attacks...

Users are experiencing resets from the Intranet server website, which is load-balanced through the Citrix ADC. Which NetScater tool can a Citrix Administrator use to troubleshoot t...

Scenario: A Citrix ADC is configured with the following modes: * MBF * USIP * USNIP * Layer 3 mode A Citrix Administrator configured a new router and now requires some of the incom...

Which mode does a Citrix Administrator need to configure in order to allow the Citrix ADC to forward any packets that are NOT destined for an IP address that is NOT configured on C...

A Citrix Administrator has configured the commands using the command-line interface. View the screenshots (Exhibit). What will be the effect of the rewrite policy, based on the exh...

Scenario: User authentication is failing through the Citrix ADC. A Citrix Administrator checked the Authentication, Authorization and Auditing (AAA) policy, action and virtual serv...

Which command should a Citrix Administrator use to configure a Content Switching virtual server for implementing the Secure Web Gateway in the transparent proxy mode?

In the Global Server Load Balancing (GSLB) configuration when dynamic proximity is implemented, the round trip time (RTT) between the__________and__________is measured to make the...

Scenario: A Citrix Administrator manages an environment that has a Citrix ADC high availability (HA) pair running on two MPX appliances. The administrator notices that the state of...

Scenario: A Citrix Administrator has configured an HTTP load-balancing virtual server with Least Response Time as the load-balancing algorithm. The administrator notices that reque...

Scenario: A Citrix Administrator has configured the rewrite action as follows: add rewrite action sync_date replace http.res.date sys.time What is the correct way to interpret this...

Scenario: A Citrix Administrator manages an environment that has multiple websites running through a Citrix ADC MPX 5550. The Citrix ADC meets the needs of the environment thiougho...

Which two options should a Citrix Administrator consider when adding a secondary device in a high availability (HA) pair? (Choose two.)

Scenario: A Citrix Administrator needs to implement a Content Filter policy to ensure the following conditions are met: * The user with source IP 10.100.32.211 should NOT be allowe...

Scenario: A Citrix ADC appliance is having intermittent issues. A Citrix Administrator is unable to identify the root cause and fix them. The administrator opened a Support ticket...

Scenario: External users are currently experiencing delays while accessing XenApp and XenDesktop through the Citrix ADC. A Citrix Administrator needs to monitor the ICA connections...

Scenario: A Citrix Administrator of a Linux environment needs to load-balance the web servers in an environment However, due to budget constraints, the administrator is NOT able to...

What is the effect of the set gslb parameter -IdnsprobeOrder DNS PING TCP command in an Active/Active Gobal Server Load Balancing (GSLB) setup?

A user needs to resolve the domain training.citrix.com, and the information is NOT available in resolver cache and Local Domain Name Server (DNS). Where will the request be forward...

Scenario: A Citrix Administrator is managing a Citrix ADC SDX running eight Citrix ADC instances. The administrator first needs to upgrade the firmware on the instances. However, t...

A Citrix Administrator needs to configure a rate limiting policy for the DNS requests to a threshold of 1000 DNS requests per second. Which set of commands does the administrator n...

Scenario: A Citrix Administrator has configured the following Access Control List (ACL) to block traffic from the IP address 10.102.29.5. add simpleacl rule1 DENY -srclP 10.102.29....

Which scenario will cause automatic high availability (HA) synchronization to fail?

Scenario: A Citrix Administrator is concerned about the amount of health checks the Citrix ADC is sending to the backend resources. The administrator would like to find a way to re...

Scenario: A Citrix Administrator needs to add 10 new web servers to an existing server farm. The new servers are configured to serve the same applications and connections and are t...

Scenario: A Citrix Administrator notices user sessions are disconnecting and reconnecting more often this week than last week, signaling a problem. The administrator troubleshoots...