PW0-250 Real Exam Questions

You are site surveying a network for VoWiFi. You have positioned an AP for a manual survey and are moving away from the AP with a phone in Survey Mode in your hand and you are reading the RSSI value of the signal received from the AP. You have previously determined that the noise floor was approximately -94 dBm on this floor of the building. The phone's documentation does not specify a recommended RSSI or SNR value for best performance. Based on the information provided and the type of device (VoWiFi phone) you are deploying, what minimum RSSI should CWNP PW0-250 Exam you plan for in all areas you are monitoring and where VoWiFi service is desired?

Given: As the wireless network administrator for XYZ Company, you are planning to upgrade your aging wireless network infrastructure, as well as some clients, to support 802.11n. In your research, you have discovered that your new wireless client devices and infrastructure are 802.11n, WMM, and WMM-PS certified by the Wi-Fi Alliance. Some of your existing client devices are 802.11a/b/g devices that do not support WMM. Given this information, what scenario is possible when your company's employees begin using both types of client devices on the new WLAN?

You are tasked with designing the WLAN to accommodate certain high density areas on your university campus where users are highly transient (frequently come and go). With a limited DHCP pool size (subnet mask = 255.255.252.0) for this WLAN subnet, you want to ensure that your DHCP addresses are used efficiently and are not exhausted, which would prevent new client associations. The DHCP server is a Windows Server 2008 machine. Your design task is to determine the best configuration to allow as many users as possible while avoiding WLAN service interruptions and also to use the available addresses as efficiently as possible. What setting would be most effective at achieving this design task?

Given: For this fill-in the blank question, each answer option contains an answer for the first and second blanks, separated by a dash "--". Choose the answer option that correctly fills in both blanks in the following sentence. A WLAN may use 802.11 admission control to ________, and admission control requirements are configured separately for each ________.

While configuring your site survey software for an upcoming manual survey project, you notice the configuration option for "Network Card Simu-lation" as shown in the exhibit. CWNP PW0-250 Exam What is the purpose of this feature and when would you use it?