HPE6-A45 Real Exam Questions

Two AOS-Switches are directly interconnected. The network administrator wants to prevent broadcast storms and other Layer 2 issues that could occur if there is physical damage to a cable. Which technology should the administrator implement on the connected switch interfaces?

How far do OSPF link state updates (LSUs) for Type 1 (Router) and Type 2 (Network) LSAs propagate?

A customer wants to authenticate AOS-Switch managers to a RADIUS server. The CIO wants to assign different rights to different management users for granular access to device setup and problems. What must the network administrator enable on the AOS-Switches to ensure they comply with this plan?

OSPF is configured on an AOS-Switch, and the network administrator sets the router ID to 10.0.0.1. The administrator wants to be able to reach the switch at this IP address, and to participate in the OSPF realm. The administrator also wants the router ID to be stable and available, even if some links on the switch fail. What should the administrator do?

A company does not require authentication for security, but AOS-Switches are set up to use local MAC authentication (LMA) to assign the correct VLAN and apply QoS policies. If the administrator is unable to provide the MAC address of a device in advance, it is supposed to connect to a specific port, but sometimes users connect their devices to the wrong ports and cannot receive access without help from IT. How can a network administrator configure the switches to eliminate this issue?