HP0-Y37 Real Exam Questions

Click the Exhibit button. A provider of MPLS services configures MPLS Layer-3 VPN services for two customers. Each customer has three branch offices that will be interconnected by MPLS Layer-3 VPNs. One customer is advertising their IP softwarx-sites using BGP. This customer establishes a backup link directly connecting Site-1 to Site-2. Which BGP attribute can the provider use to prevent routing update loops in the MPLS network?

You are in the process of replacing Cisco switches at the distribution layer with HP A-Series switches. You have connected the A-Series switches in parallel with the existing Cisco switches at the distribution level, edge, and core. The HP A-Series switches are configured for Intelligent Resilient Framework (IRF) and the VLAN interfaces have been assigned an unused IP address for the router address. You now want the A-Series switches to assume routing responsibilities for one of your network four VLANs. You connect to the router address. You now want the A-Series switches to assume routing responsibilities for one of your network's four VLANs. You enter the DHCP scope to reflect the new gateway IP address. What should you verify before beginning this step?

Click the Exhibit button and view the three exhibits. When interface Serial 4 of Router 2 fails, traffic from Router 1 destined for network 192.152.0.0/16 leaves AS 65001 via the Serial 3 interface of Router 1. The administrator prefers that this traffic leaves AS 65001 through interface Serial 5 of Router 2. Which configuration change will achieve the desired results?

The 10 Gigabit Ethernet link 1/0/25 between the HP A5800 switches in the exhibit is disconnected from IRF Member 5 for several minutes. What happens when the cable is reconnected?

You are migrating a customer's distribution layer from Cisco Catalyst 3560 switches to HP A7500 Series switches. You are not planning the Layer 3 migration. The Cisco switches use Hot Standby Router Protocol (HSRP) and the HP switches will use Intelligent Resilient Framework (IRF), which will allow the multiple switch stack to function as redundant default gateways for the LAN's subnets.You task with the customer and determine that you will not be able to gain access to other network systems such as DHCP servers nor firewalls and other security devices.Which general method should you select for migrating routing functionality?