PW0-105 Exam Questions
161 real PW0-105 exam questions with expert-verified answers and explanations. Page 2 of 4.
- Question #51
What conditions can prevent an 802.11 client device from performing a fast BSS transition between two access points that are part of the same WLAN system?
- Question #52
What statements about the Service Set Identifier (SSID) are true?
- Question #53
Given: John configures ten IEEE 802.11 dual-band ERP / OFDM laptops in a conference room for Ad Hoc wireless networking. One laptop is connected to the Ethernet network, and its Et...
- Question #54
What parameters make WMM-PS more efficient than legacy 802.11 Power Save mode?
- Question #55
What 802.11 WLAN type implements power management where stations send trigger frames to the AP after they awake from dozing?
- Question #56
Given: Unicast data frames are queued at the access point for a dozing station that is operating in IEEE 802.11 legacy (non-QoS) Power Save mode. What actions are part of the proce...
- Question #57
In an IEEE 802.11 frame, the IP packet is considered by the MAC layer to be a(n) _________.
- Question #58
What criteria can an 802.11 wireless client use to select the best access point with which to associate?
- Question #59
In an Infrastructure Basic Service Set (BSS), what best describes the Passive Scanning process?
- Question #60
What mechanism is used to maintain time synchronization in an 802.11 BSS?
- Question #61
What item is essential for performing a manual RF site survey for a warehouse facility?
- Question #62
Which antenna types are commonly used by indoor Wi-Fi devices in a MIMO diversity implementation? (Choose two)
- Question #63
Which data rate is supported by 802.11g radios that is not supported by 802.11a radios?
- Question #64
What information is transmitted in the Beacon management frames of an HT access point to communicate about backward compatibility with ERP and HR/DSSS stations? (Choose two)
- Question #65
Given: XYZ Company is planning to install a new 802.11 WLAN, but wants to upgrade its wired infrastructure first to provide the best user experience possible. XYZ has hired you to...
- Question #66
Given: XYZ Company has decided to install an 802.11 WLAN system that will support 1000 wireless users, but they are concerned about network security. XYZ is interested in deploying...
- Question #67
When a client moves to a new BSS within an ESS, what steps are part of the 802.11 reassociation process? (Choose two)
- Question #68
What causes of hidden nodes within a BSS would likely lead to an increase in collisions and retries? (Choose two)
- Question #69
What terms accurately complete the following sentence? The IEEE 802.11-2007 standard specifies mandatory support of the ___________ cipher suite for Robust Security Network Associa...
- Question #70
Given: A WLAN transmitter that emits a 200 mW signal is connected to a cable with 3 dB loss. If the cable is connected to an antenna with 10 dBi gain, what is the EIRP at the anten...
- Question #71
In an infrastructure Basic Service Set (BSS), how does the passive scanning process occur?
- Question #72
When a client station sends a broadcast probe request frame with a wildcard SSID, how do APs respond?
- Question #73
What statement describes the authorization component of a AAA implementation?
- Question #74
What facts are true regarding controllers and APs in a Split MAC architecture? (Choose 2)
- Question #75
What feature(s) are most likely to be supported by 802.11 enterprise-class WLAN controllers? (Choose 4)
- Question #76
Given: You are the network administrator for ABC Company. Your manager has recently attended a wireless security seminar. The seminar speaker taught that a wireless network could b...
- Question #77
What component of the 802.11 standard allows stations to reserve access to the RF medium for a specified period of time?
- Question #78
Given: Network users and IT personnel at a large machinery manufacturer have been discussing the potential uses and benefits of implementing an indoor WLAN. The network administrat...
- Question #79
In a long-distance RF link, what statement about Fade Margin is true?
- Question #80
What statement best describes the manual RF site survey report?
- Question #81
Why is it recommended for a wireless network administrator to disable 1 Mbps and 2 Mbps data rates on the WLAN infrastructure? (Choose two)
- Question #82
When replacing the antenna of a WLAN device with a similar antenna type that has a higher passive gain, what antenna characteristic will decrease?
- Question #83
What word describes the bending of an RF signal as it passes from one medium to another medium of a different density?
- Question #84
Given: ABC Company performs top-secret government contract work and has recently purchased an 802.11 Wireless Intrusion Prevention System (WIPS) to enforce their "NO WIRELESS" netw...
- Question #85
During the discovery and connectivity process, client and AP stations exchange information about their supported data rates. After the association, how do client and AP stations se...
- Question #86
ABC Company has a 2.4 and 5 GHz WLAN deployment supporting four bands in the 5 GHz range (UNII 1, UNII 2, UNII 2e, and UNII 3). DFS functionality is enabled as required by the regu...
- Question #87
Given: You were previously on-site at ABC's facility to conduct a pre-deployment RF site survey. The WLAN has been deployed according to your recommendations and you are on-site ag...
- Question #88
Given: To ease user complexity, your company has implemented a single SSID for all employees. However, the network administrator needs a way to control the network resources that c...
- Question #89
As a consultant, you've been hired by XYZ Company to provide recommendations about client device selection, operation, and interoperability. What information should be considered t...
- Question #90
Given: ABC Hospital is planning a Wi-Fi infrastructure upgrade where the 802.11b/g APs would be replaced with new dual-radio HT (802.11n) APs. ABC wants to minimize the time and co...
- Question #91
Given: In a single channel architecture (SCA) WLAN system, 802.11n (HT) APs should not share an SSID with 802.11g (ERP) APs. What is the reason for this recommendation?
- Question #92
Which unit of measurement is a relative unit that is used to quantify power level changes?
- Question #93
Given: Return Loss is the decrease of forward energy in a system when some of the power is being reflected back toward the transmitter. What causes high return loss in an RF transm...
- Question #94
The OSI model is a 7-layer model for understanding the functions of a communication system. What OSI sublayers are specifically addressed by the IEEE 802.11-2007 standard? (Choose...
- Question #95
The 802.11 protocol specifies a fundamental channel access method that is required for all stations and is used in all IBSS and BSS networks. What is this fundamental channel acces...
- Question #96
What advantages does using predictive site survey modeling software offer over performing a manual site survey? (Choose two)
- Question #97
What term correctly completes the following sentence? 802.11a/b/g used a mandatory 800ns guard interval. 802.11n introduces an optional short 400ns guard interval. Guard intervals...
- Question #98
In a Wi-Fi client configuration utility, what feature is most likely to be user configurable?
- Question #99
As XYZ Company's wireless specialist, you have been asked to troubleshoot some unexpected frame patterns in a wireless protocol capture. Your peers explain that the network's beaco...
- Question #100
In an 802.11n WLAN with a heterogeneous set of associated client devices including 802.11b, 11g, and 11n, what HT protection mode will the BSS use?