NS0-502 Exam Questions

Click the Exhibit button. Given the information provided in the diagram, what is the appropriate FC topology?

Which FC SAN topology provides the best performance and scalability?

A 200-GB LUN is created in an empty 500-GB volume with the volume guarantee option set to Volume. LUN reservation is enabled and the fractional reserve is set to 100 and scheduled...

Click the Exhibit button. Based on the diagram shown, what is the appropriate FC switch topology?

Click the Exhibit button. Based on the diagram shown, what is the appropriate FC switch topology?

A 100-GB thinly provisioned LUN is allocated to a Windows host. 100 GB of data is written into the LUN. The current capacity utilization on the disk array as well as the host is 10...

A company has FC patch panels in their data center. They plan on using them to interconnect their storage controllers to the FC switches and the hosts using the storage. They have...

NetApp supports multiple FC paths from the host to the NetApp storage controllers. In addition to using multiple FC switches, which other NetApp supported components should you use...

A company has an assortment of operating systems in their environment. Which operating system is NOT currently supported by NetApp for their FC solutions?

What should you do to verify FC connectivity between the host and the FC switch?

What is the appropriate method for testing high availability controller failover?

What should you do to test NetApp storage controller failover in a high availability FC environment?

Which three statements are true about Asymmetric Logical Unit Access (ALUA)? (Choose three.)

for which four operations would you use igroup throttles on a NetApp storage solution? (Choose four.)

A company is planning to use physical Raw Device Mappings (RDMs) in their ESX environment. Which LUN type should they use on the NetApp storage system if they want to prevent LUN I...

What is the functionality of the latest Data ONTAP DSM for Windows?

Click the Exhibit button. In the diagram shown, a portset is created on controller 1 with the command: controller1>portset create -f ntapportset conroller1:0b. This portset is boun...

When assessing a current storage solution, it is critical to document the current NetApp storage system configuration. Which factor should NOT be considered when documenting this e...

Which command do you use on a Brocade switch to view all defined zone configuration information?

Which command do you use on a Cisco switch to view the currently active zoneset?

When building your implementation plan, providing dual power for all systems is critical. Which three actions should be mandated? (Choose three.)

What information needs to be included in a cabinet diagram? (Choose three.)

Click the Exhibit button. In the cabinet diagram shown, what additional information should be included to make it more complete?

What is NetApp's recommended best practice for zone configuration?

Click the Exhibit button. In the diagram shown, how should the zoning configuration be changed to better comply with NetApp best practices?

Which type of zoning does NetApp recommend?

What does NetApp recommend as best practice for zone configuration?

Click the Exhibit button. Given the information shown in the diagram, which port has a NetApp device attached to it?

In a NetApp SAN solution, which value should you set for snap reserve for a volume holding LUNs?

Which command do you use to see the rate of change between two successive Snapshot copies in a flexible volume in Data ONTAP?

Which statement is true about single_image cfmode?

What are two functions provided by the NetApp Host Utilities Kits? (Choose two.)

Click the Exhibit button. When should you define the space management policy that is shown in the table?

Which three tasks should be completed as part of the site preparation for install? (Choose three.)

Which task is part of the site preparation for installation?

Which software feature must be supported and configured on the NetApp storage controller to configure multipath high availability between the storage controller and disk shelves?

Which three does NetApp support for iSCSI with Microsoft Windows solutions? (Choose three.)

Which topology allows for guaranteed maximum network performance for iSCSI?

You are installing a NetApp FAS6040 high availability storage system. Which cfmode should be set to ensure proper failover in an HP-UX environment?

You are creating an acceptance test plan and the subject of performance is raised. How should you define what the minimum performance should be?

Which type of multipathing does Linux support?

You need to gather information from the host systems that will be attached to the NetApp storage system using either FC or iSCSI. This information includes operating system version...

Which four FC fabric topologies does NetApp support? (Choose four.)

For which two purposes would the use of VLAN's be beneficial? (Choose two.)

A company wants to use jumbo frames to improve performance with their iSCSI network. When setting up the Ethernet switches for jumbo frames, which three components need to be confi...

A company wants to use jumbo frames in their Ethernet network. They should set the packet size to which industry conventional value?

What is the default Ethernet packet size (or MTU - Maximum Transmission Unit) for Ethernet ports on Ethernet switches?

When setting up a VLAN for administrative security purposes, which four ports are the only important ports to include in the VLAN? (Choose four.)

You are booting a NetApp storage system for the first time. In which order should the various components be powered on?

When booting your NetApp storage system for the first time the system fails to boot. What should you do first to address this problem?