NS0-158 · Question #56
NS0-158 Question #56: Real Exam Question with Answer & Explanation
The correct answer is B: Reboot the node to bring the adapter online after final configuration.. B: Ports must be converted in pairs, for example, 0c and 0d, after which, a reboot is required, and the ports must be brought back to the up state. D: CNA ports can be configured into native Fibre Channel (FC) mode or CNA mode. If the current configuration does not match the desi
Question
Exhibit
Options
- AUse the network fcp adapter modify command to bring the adapter online.
- BReboot the node to bring the adapter online after final configuration.
- CUse the system hardware unified-connect command to verify that the port mode is set to initiator.
- DUse the ucadmin modify command to set the adapter mode to FC.
Explanation
B: Ports must be converted in pairs, for example, 0c and 0d, after which, a reboot is required, and the ports must be brought back to the up state. D: CNA ports can be configured into native Fibre Channel (FC) mode or CNA mode. If the current configuration does not match the desired use (here we want to change from CNA mode to FC mode), enter the following commands to change the configuration as needed: system node hardware unified-connect modify -node node_name -adapter adapter_name - mode fc|cna -type target|initiator -mode is the personality type, fc or 10GbE cna. -type is the FC4 type, target or initiator. https://library.netapp.com/ecmdocs/ECMP1151595/html/GUID-1D06A7C4-F354-4793-A331- 68A2CD916084.html
Community Discussion
No community discussion yet for this question.