Which MetroCluster configuration procedure is recommended for re-establishing a mirrored volume that was in a level-0 resynchronization state when it failed?

Question

Options

• ADetermine which volumes are at the remote and disaster sites.
• BRe-create the synchronous mirror.
• CRejoin the two volumes.
• DTurn on power to the cluster node at the disaster site.

• A
  17% (8)
• B
  72% (34)
• C
  4% (2)
• D
  6% (3)

Explanation

https://library.netapp.com/ecmdocs/ECMP1210206/html/GUID-A865DB95-9418-4ED2-A993- 74F347F674A0.html 1. Validate that you can access the remote storage by entering the following command: Note: A (level-0 resync in progress) message indicates that a plex cannot be rejoined. 2. Turn on the power to the node at the disaster site. After the node at the disaster site boots up, it displays the following: Waiting for giveback...(Press Ctrl-C to abort wait) 3. If the aggregates at the disaster site are online, take them offline by entering the following command for each aggregate that was split: aggr offline disaster_aggr disaster_aggr is the name of the aggregate at the disaster site. Note: An error message appears if the aggregate is already offline. 4. Destroy every target plex that is in a level-0 resync state by entering the following command: aggr destroy plex_name 5. Re-create the mirrored aggregates by entering the following command for each aggregate that aggr mirror aggr_name -v disaster_aggr aggr_name is the aggregate on the surviving site's node. disaster_aggr is the aggregate on the disaster site's node. The aggr_name aggregate rejoins the disaster_aggr aggregate to reestablish the MetroCluster configuration. 6. Enter the following command at the partner node: The node at the disaster site reboots.

No community discussion yet for this question.