HP
HPE6-A73 · Question #12
Examine the network topology. (Refer to the image in the source document showing Core1, Core2, Area 1, Area 0, Area 2, ASBR, ISP 1 and VLANs). The network is configured for OSPF with the following…
The correct answer is B. Core1 has no OSPF routes. See the full explanation below for the reasoning.
Question
Examine the network topology. (Refer to the image in the source document showing Core1, Core2, Area 1, Area 0, Area 2, ASBR, ISP 1 and VLANs).
The network is configured for OSPF with the following attributes:
- Core1 and Core2 and ABRs
- Area 1 has 20 networks in the 10.1.0.0/16 range
- Area 0 has 10 networks in the 10.0.0.0/16 range
- Area 2 has 50 networks in the 10.2.0.0/16 range
- The ASBR is importing a static route into Area 1
- Core2 has a summary for Area 2: area 0.0.0.2 range 10.2.0.0/16 type inter-area Here is the OSPF configuration performed on Core1: Core1(config)# router ospf 1 Core1(config-router)# router-id 10.0.0.1 Core1(config-router)# passive-interface default Core1(config-router)# area 0.0.0.0 Core1(config-router)# area 0.0.0.1 stub Core1(config-router)# area 0.0.0.1 range 10.1.0.0/16 type inter-area Core1(config-router)# area 0.0.0.2 Core1(config-router)# area 0.0.0.0 range 10.0.0.0/16 type inter-area Core1(config-router)# exit Core1(config)# interface vlan 10 Core1(config-if)# ip address 10.0.1.1/24 Core1(config-if)# ip ospf 1 area 0 Core1(config-if)# exit Core1(config)# interface vlan 100 Core1(config-if)# ip address 10.1.1.1/24 Core1(config-if)# ip ospf 1 area 1 Core1(config-if)# exit Based on the above information, what is correct?
Options
- AArea 0 has 13 routes
- BCore1 has no OSPF routes
- CCore1 has received one LSA Type 5 from the ASBR
- DArea 1 has 23 routes
How the community answered
(34 responses)- A6% (2)
- B71% (24)
- C6% (2)
- D18% (6)
Community Discussion
No community discussion yet for this question.