HPE2-Z39 Exam Questions

A network administrator needs to configure Virtual Switching Framework (VSF) for the first time on an ArubaOS switch. The administrator enters this command: The administrator then...

What is the effect if a network administrator sets a spanning tree priority on an ArubaOS switch interface?

The switches in the exhibit use RSTP The network administrator needs to add Link 2. Why should the administrator configure Links 1 and 2 as a link aggregation?

Two ArubaOS switches connect on a VLAN. and both enable OSPF on that VLAN. Which VLAN OSPF setting must match for the switches to become fully adjacent neighbors?

A network administrator has set up a link between two ArubaOS switches. Both switches have an IP address in VLAN 1 and can ping each other in VLAN 1. The administrator then creates...

The Student A client needs to connect to FTP Server B. Student A sends the necessary ARP request and receives a reply. Which destination MAC address does the Student A client use i...

Network administrators need to access an ArubaOS switch CLI remotely. How can the administrator ensure that all data passed between management stations and the switch is encrypted?

All switches are ArubaOS switches that currently have the default spanning tree priority. Switch-1 should be the root of the spanning tree If Switch-1 fails. Switch-2 should become...

An ArubaOs switch has no passwords configured on it. The network administrator then enters these commands: What is one task that the admin 1 user can log in to the switch and compl...

A network administrator needs to reach an ArubaOS switch CLI at a management IP address. The administrator also needs to ensure that the switch entirely rejects Telnet and SSH conn...

The exhibit shows settings for a WLAN on an Aruba Instant cluster. To which VLAN is wireless user traffic assigned?

A network administrator suspects that interfaces in a link aggregation have been accidentally connected to multiple switches. The administrator wants to find the hostnames of the s...

This exhibit shows the topology for a company campus LAN. Each access layer switch will be the default router for the devices connected to it. The company needs to permit the follo...

A network administrator wants to apply a critical PoE priority to any ArubaOS switch port that connects to an Aruba AR The priority should be applied dynamicaly based on LLDP messa...

A network administrator configures LLDP-MAD on an Aruba Virtual Switching Framework (VSF) fabric. The administrator needs to enter an SNMP community string after v2c in this comman...

The ArubaOS switches were at default settings. The network administrator configures the VLANs and IP addresses as shown in the exhibit. All inter switch links are untagged for VLAN...

Switch-1 and Switch -2 have the Virtual Switching Framework (VSF) settings shown in the exhibits. The administrator then connects the switches together on the interfaces in the VSF...

A network administrator manages an ArubaOS switch through the CLI The administrator needs to configure an untagged VLAN assignment on a range of interfaces. How should the administ...

After the administrator enters this command, packets arrive that are destined for 10.1.8.8 and 10.1.8 13. What does the switch do with this traffic?

Based on this ArubaOS switch output, what can a network administrator determine about the spanning tree topology?

An ArubaOS switch operates at factory defaults and has a reachable IP address. How can network administrators access the switch CLI ?

How can the network administrator find the interface that Switch-3 uses to forward traffic from the Client to the Server?

An ArubaOS switch has the routing table shown in the exhibit. A network administrator then enters this command: Switch (config) # ip routs 10.0.0.0/8 10.1.104.2 After the administr...

What is a benefit of HPE Network Optimizer in an Aruba network?

Network administrators manage ArubaOS switches through the CLI. What is one prerequisite to enable transfers of completely encrypted config files?

Which devices must support Multi-User Multiple Input Multiple Output (ML) MIMO) in order for an AP to transmit to multiple clients simultaneously?

What do all devices in the same AirWave folder have in common?

This ArubaOS switch receives traffic without a VLAN tag on a switch port 1. The traffic is destined to a MAC address learned on port 2. What does the switch do with the traffic?

The Virtual Switching Framework (VSF) fabric and other switches connect on LACP link aggregations. They use OSPF for routing. What should a network administrator do to help network...

A company wants to use Zero Touch Provisioning (ZTP) to provision new ArubaOS switches. Which AirWave settings must match the switch default SNMP and Telnet/SSH password settings?

What are two ports with the alternate role?

The switches shown in the exhibit are ArubaOS switches that implement RSTP. The switches are configured with the spanning tree priorities shown in the exhibit, and they use their d...

A network administrator has set up OSPF to enable communications between subnets 10.1.4.0/24 and 10.1.8.0/24. Swffch-4 is not receiving a route to 10.1.4.0/24. What should the netw...

A company has a cluster of Aruba Instant APs (lAPs). The company wants to add a new IAP to the cluster. What should network administrators ensure before they connect the new IAP?

A port on an ArubaOS switch currently has its default VLAN assignment. The network administrator wants the port to continue to be part of the default VLAN. The administrator also w...

What is one reason to configure a dynamic LACP link aggregation instead of a static link aggregation?

An Aruba Virtual Switching Framework (VSF) fabric has 10GbE interfaces assigned to its VSF link. The network administrator wants to change the link to use 40GbE interfaces. Which p...

Exhibit 2 shows the IP routine tables for all the switches after the link between Switch-4 and Switch-2 failed '//'hen This link fails traffic between 10 1 3 0/24 and 10.1.2.0724 i...

A port on an ArubaOS switch has its default spanning tree settings. When is the port defined as a spanning tree edge port?

A network administrator connects several new Aruba Instant APs (at factor/ defaults) to a switch. After waiting several minutes for the cluster to form, the administrator is ready...

A network has ArubaOS switches and an Aruba Instant cluster with IP addresses on 10.1.255. 0/24 The network administrator wants to manage the devices in Aruba AirWave. The administ...

A switch receives a broadcast frame in VLAN 2 on link aggregation, trk 1. How does the switch handle the broadcast?

Which devices must support Multi-User Multiple Input Multiple Output (MU MIMO) in order for an AP to transmit to multiple clients simultaneously?

What is the result of this configuration?

Which behavior does Switch-1 exhibit on its link aggregations?

A network administrator enters this command on an ArubaOS switch: Switch(config) # trunk 1,2 trk1 What is required for the switch to combine both interfaces in a link aggregation?

A network administrator creates a route to 10.1.2.0724 on Switch-4. What is the correct next hop for the route?

A company needs a modular switch that can be combined with another modular switch into a single logical fabric. Which ArubaOS switch series meets these criteria?

What is the purpose of the organization string that is set in the System > Admin settings of an Aruba Instant UI?

Which settings are required on ArubaOS switches for Aruba AirWave to discover, monitor, and manage them?