HPE0-S58 Exam Questions
80 real HPE0-S58 exam questions with expert-verified answers and explanations. Page 1 of 2.
- Question #1
A customer is considering implementing a DRS cluster, but they would like to know how DRS can help to achieve performance goals. How should an integrator respond?
- Question #2
A customer needs to upgrade an HPE Synergy 12000 frame with an HPE Virtual Connect SE 32Gb Fibre Channel (FC) Module. Which steps must the integrator take to install the upgrade?
- Question #5
Which component provides Active Health System logs to be analyzed by HPE Infosight?
- Question #6
A customer wants to expand their existing cluster using the Grow Cluster functionality from OneView for vCenter Server by Image Streamer is not available. Which OS build plan manag...
- Question #7
An integrator is modifying the network uplink configuration of a Synergy environment that uses HPE Synergy 40Gb F8 Switch Modules for connectivity. What must the integrator do to m...
- Question #8
What is the purpose of the OmniStack Accelerator card installed in HPE SimpliVity platform?
- Question #9
A customer wants to add nodes to the existing ESXi cluster using the HPE OneView for vCenter Server. What must be done before this functionality can be used?
- Question #10
A customer complains about the database performance running on the HPE Synergy 480 compute node. To solve that problem, an integrator has to install the maximum memory in this comp...
- Question #11
A customer needs to attach 20 HPE 1 TB SATA 6G SFF hard drives to an HPE Synergy 480 Gen10 compute module. Which HPE products are necessary to meet the requirements? (Choose three....
- Question #12
Which management tool required by HPE Infosight must be deployed at the customer site?
- Question #13
An integrator is performing initial configuration of three-frame Synergy solution with HPE Image Streamer. Which networks must be created for this configuration? (Choose two.)
- Question #14
An HPE Synergy compute module has a template-based server profile with two identically configured connections, each containing five VLANs. What is the most efficient method the int...
- Question #15
A customer needs to significantly improve I/O performance to a database server. Which product should an integrator implement as part of a Synergy composable solution?
- Question #17
A customer needs to expand a single-frame Synergy solution to two frames. What should the integrator do to establish a proper management network for the two frames?
- Question #18
An integrator is installing three Synergy frames in different locations for a customer. As part of the installation, the customer requests a single monitoring dashboard that shows...
- Question #20
A customer has forgotten the password for the HPE Composer managing the customer's HPE Synergy Infrastructure. Where can the customer reset the password with the assistance of HPE...
- Question #21
Which HPE Synergy D3940 storage module configuration is valid?
- Question #22
A customer wants to remove nodes from an existing ESXi cluster using the HPE OneView for vCenter Server. What must be done before this functionality can be used?
- Question #23
Refer to the exhibit. How should an integrator pair interconnect bays to set up redundant fabrics in an HPE Synergy 12000 Frame?
- Question #26
Which storage solution can be used for volume provisioning using HPE Composer?
- Question #27
Refer to the exhibit. A customer has an HPE Synergy 2-frame configuration, as shown. The customer has a new project and needs to increase the number of compute modules. What is the...
- Question #28
How can an integrator increase the efficiency with which a Synergy solution can be provisioned? (Choose two.)
- Question #29
A customer needs an integrator to add HPE 3PAR StoreServ to the HPE Composer. When the integrator tries to add it, they get an error and 3PAR is not added. What should the integrat...
- Question #30
Which component of the HPE Synergy solution should you use to set the firmware/driver baseline and the installation method for Synergy Compute nodes?
- Question #32
An integrator is validating an HPE Synergy solution design for a customer that has the following requirements: 20 half-height compute modules 2x 20Gb connectivity to each compute m...
- Question #33
What must an integrator do before an existing cluster can be imported to the HPE Composer?
- Question #34
How can an integrator use an HPE Synergy D3940 storage module to provision shared storage to compute modules without requiring a separate SAN to be connected to the frame?
- Question #35
A customer needs to deploy a farm of Windows Server 2019 Hyper-V using an Image Streamer. The customer discovered that the OS Build Plan for this OS is not available from the Image...
- Question #36
Which approach should an integrator take to efficiently configure a 10-frame Synergy environment that has been fully populated with compute nodes?
- Question #37
Using SSMC, an integrator has added a new CPG on the HPE 3PAR StoreServ array integrated with HPE Composer. The new CPG is not visible in the HPE Composer. What must the integrator...
- Question #38
Refer to the exhibit. to scale the two-frame single homed Multimodule Link Aggregation Group (MLAG) configuration to a three-frame configuration. The new frame needs to provide a r...
- Question #39
A customer is unable to boot to a 3.5TB volume created and presented to a compute node. What is likely preventing the boot?
- Question #40
A customer connected a logical drive from 3PAR StoreServ array to the Windows Server 2016 as a data drive. The customer complains that in the Disk Manager, they can see the same vo...
- Question #43
What is the main difference between HPE SimpliVity 2600 and HPE SimpliVity 380?
- Question #44
Refer to the exhibit. CPG is not available for provisioning. The integrator checked the Storage Pools section, and the CPG is visible. What must the integrator do to enable volume...
- Question #46
A customer has forgotten the password for the HPE Composer managing the customer's HPE Synergy infrastructure. Which information is needed to regain access to the console? (Choose...
- Question #47
A customer tries to revert a data volume located on the HPE 3PAR array to a specific snapshot that was taken using HPE Composer, but the process fails. What must an integrator do t...
- Question #48
A customer has a Hyper-V and ESXi hypervisors deployed on an HPE Synergy platform. The customer needs a tool that will provide health and performance monitoring. Because their envi...
- Question #50
Which technology used in HPE SimpliVity allows a reduction in storage consumption?
- Question #51
A customer wants to expand their existing cluster using the Grow Cluster functionality from OneView for vCenter Server. Which OS build plan managed by HPE OneView for vCenter Serve...
- Question #52
A customer's Synergy configuration requires HPE Synergy 12Gb SAS Connection Modules in interconnect module bays 1 and 4, and HPE Virtual Connect SE 40Gb F8 modules for HPE Synergy...
- Question #53
An integrator needs to configure a set of networks for Synergy compute nodes to send data to devices outside of a Synergy frame. How should the integrator complete the task?
- Question #54
A customer using HPE Synergy is unable to access certain VLANs from a single NIC port of a compute module. Which configuration option in the server profile needs to be verified to...
- Question #55
A Synergy integrator is creating a network that needs to be connected from the Virtual Connect SE 40Gb F8 module to a Fibre Channel (FC) Switch. Which network type should the integ...
- Question #56
A customer has a datacenter with 3-frame Master/Satellite Synergy solution. They plan to add two additional frames to the remote datacenter, but they want to have a single manageme...
- Question #57
Which component must be deployed at the customer site and is essential for HPE InfoSight for Servers?
- Question #58
Using a laptop, how can an integrator perform the initial setup on an HPE Synergy 12000 Frame?
- Question #59
An integrator is performing an initial Synergy setup. How should the integrator initiate the hardware discovery?
- Question #60
A customer plans to deploy VMware HA cluster using the Hypervisor Cluster Profile feature of OneView. What must the customer consider when configuring the HA cluster?
- Question #61
Refer to the exhibit. An integrator needs to add an FCoE connection to the server profile, but the FCoE connection type is not available. What is the likely cause of this issue?