HP0-Y51 Exam Questions

Refer to the exhibit. The switches shown in the exhibit use the HP VAN SDN Controller as the OpenFlow controller. They connect to the controller on their out-of-band management (OO...

A company has HP MultiService Mobility (MSM) APs that receive DHCP addresses on several different subnets. The APs are controlled by an MSM Controller. The company is considering r...

A company has an HP Network Protector SDN Application with these characteristics: - The Network Protector whitelist for all user VLANs includes site1.example.com. - The blacklist f...

Which common data center requirement does an HP EVI solution meet?

Which OpenFlow use case is an example of Network Functions Virtualization (NFV)?

The switches shown in the exhibit form a TRILL region. What helps to load balance traffic across the links between these switches?

How does the HP Optimizer SDN Application -Microsoft Lync enhance QoS for Microsoft Lync?

A company has three HP VAN SDN Controllers, which will be deployed in a team. The administrator is deciding whether to create one region or three regions. What is a benefit of crea...

Refer to the exhibit. The exhibit shows the Fibre Channel (FO) zones that are members of zonesets on an HP Comware switch. How does this zoning affect the FC fabric operation?

Refer to the exhibit. A company has many dual-radio APs that are deployed relatively closely together. They are controlled by an HP Unified Wired-Wireless controller. The administr...

An HP Virtual Cloud Networking (VCN) SDN Application runs on an HP VAN SDN Controller. How does VCN help to provision networking for virtualized services in a cloud solution?

A company is adding an HP BYOD solution. User Access Manager (UAM) should provide the portal in which guests register their own accounts. Guests should only have to register and lo...

When should an administrator enable hybrid mode on an HP VAN SDN Controller?

A company has a Unified Wired-Wireless controller solution, which uses its local portal to authenticate guests. The company is adding an HP BYOD solution with these requirements: -...

Refer to the exhibit. A company has two HP Unified Wired-Wireless controllers. The MSM APs in Area 1 in the exhibit are controlled by Controller1. The MSM APs in Area 2 in the exhi...

HP Unified Wired-Wireless controllers support wireless Intrusion Detection System (IDS)/Intrusion prevention system (IPS) features. An HP AP radio is configured to participate in t...

A company has an HP BYOD solution with these requirements: Employees can connect their own devices to an Employees SSID, which enforces Wi-Fi Protected Access 2 (WPA2) with 802.1X....

A company has a data center that hosts multiple tenants. The company is adding a second and third data center switch. These are the IRF connections: - IRF 1 is the core of the firs...

An HP HP SDN Controller runs the HP Network Protector SDN Application. The application has programmed an HP Switch with flows that output the service insertion tunnel. How does the...

An administrator is customizing an HP BYOD self-registration page. The administrator does not want guests to see the identity number field. Instead the User Access Manager (UAM) se...

An administrator has configured an HP Comware IRF virtual device to support FCoE in Fibre Channel Forwarder (FCF) mode. The IRF device supports VLAN 1, 10, 20, and 30. The device r...

Refer to the exhibit. An administrator is setting up MPLS Layer 2 VPN connections between several customer sites: Connection 1 = Customer site 1 to customer site 2 Connection 2 = C...

Refer to the exhibit. A company has HP APs that are managed by the two Unified Wired Wireless controllers. Wireless users use Wi-Fi Protected access (WPA2) and authenticate with 80...

An administrator sets up an OpenFlow instance on an HP Provision switch in passive mode. What does this mean?

Refer to the exhibit. An HP Comware switch is configured with the MDC feature. It has three MDCs, which use the same CPU and are assigned these CPU weights: MDC 1 = 10 MDC 2 = 4 MD...

A company is deploying an HP Unified Wired-Wireless controller solution with an HP BYOD solution. Guests will connect to an open Guest SSID and be redirected by their default gatew...

An HP provision switch has OpenFlow flow table entries indicated in the exhibit. The switch should forward most traffic between 10.1.10.0/24 and 10.1.20.0/24 on port 1. However any...

The switches shown in the exhibit are implementing SPBM. The administrator is now setting up interface ten1/0/1 to connect to a new VMware host. What is the correct port type and V...

An administrator wants to connect four data centers using HP EVI. What is the correct setup for the EVI tunnel interfaces?

The switch shown in the exhibit should form a TRILL region. For Switch 1 interface ten1/0/22, what is a valid port link-type and TRILL port type?

An administrator is planning an MPLS and VPLS Martini to connect customer sites 1, 2, and 3. How many pseudo must the administrator define?

An administrator plans to deploy a wireless network, which might need to support a mix of 802.11g and 802.11n clients in the 2.4 GHz frequency. The administrator wants to prioritiz...

A company has an HP VAN SDN Controller that controls HP Provision switches. An SDN developer creates an application that needs to make many immediate decisions for handling traffic...

The HP Comware switch places VLAN 2, which is associated with 10.1.2.0/24, in OpenFlow instance 1. The switch supports IP routing and is configure with the default gateway IP addre...

What correctly describes the role of OpenFlow in an SDN solution?

An SDN application needs to create reactive flow table entries in response to specific packets. The flow_mod APIs will create the actual entries, but application must be configured...

What is a benefit of enabling tandem multicast replication for SPBM?

A company has an Employee SSID, which enforces Wi-Fi Protected Access 2 (WPA2) with 802.1x. The company has a Contractors SSID, which has no encryption. Contractors can connect the...

A company has an HP Unified Wired-Wireless controller that controls HP MultiService Mobility (MSM) APs. The network administrator wants to implement protection against rogue APs in...

An HP Unified Wired-Wireless controller controls an AP. The AP implements centralized forwarding. It supports 802.11n clients that implement Wi-Fi Multimedia (WMM) or 802.11e. Some...

Which HP IMC module helps companies to manage TRILL and SPBM solutions, as well as converged LAN/ SAN solutions?

A company is deploying an HP VAN SDN Controller solution, which is installed with the HP Network Protector application. The administrator configures the solution to control HP Prov...

A company is considering TRILL and SPBM as options for the data center architecture. The company is interested in how the solution handles load-balancing unicast traffic. What corr...

An administrator has set up an HP BYOD solution for an HP MSM760 controller and its APs. These are the specifications: - Guests should only have to register and log in once After t...

A company has APs that are deployed relatively close together. These APs are controlled by an HP Unified Wired-Wireless controller. Which setting helps to prevent the APs from inte...

A company has an external SDN application that works with an HP VAN SDN Controller. The application programmer has tried testing several RESTful API calls but receives authenticati...

An administrator is configuring an MPLS and VPLS Martini to connect customer Sites 1, 2, and 3. The administrator has created Virtual Switch Instance (VSI) "CustomerA" for this pur...

A company has an HP BYOD solution to let guests connect to a Guest SSID and log in through a registration page. The company needs an Employee SSID which enforces Wi-Fi Protected Ac...

An administrator wants to establish a remote LDP session between PE-1 (loopback IP address 10.0.0.1) and PE-2 (loopback IP address: 10.0.0.2). What is required to do this?

An administrator is setting up an EVI solution on four HP Comware switches. The switches reach each other on these IP address: Switch1 = 10.1.1.1 Switch2 = 10.2.2.2 Switch3 = 10.3....