A customer needs to add a GPU card to an HP Blade server. What does the customer need to do in order to add the GPU card?

Question

Options

• AEnable the PCI pass-thru on the Blade server.
• BInstall a PCI riser card in Mezzanine Slot 3 within the Blade server.
• CInstall a PCI Expansion blade in the slot adjacent to the Blade server.
• DEnable the PCI pass-thru on the Onboard Administrator.

• A
  18% (11)
• B
  8% (5)
• C
  71% (44)
• D
  3% (2)

Explanation

Example: Installing an NVIDIA Quadro K6000 graphics card into the HP ProLiant WS460c Gen8 Graphics Expansion Blade. 1. Power down the HP WS460c Gen8 Expansion Blade. 2. Remove the HP WS460c Gen8 Expansion Blade. 3. Insert the NVIDIA Quadro K6000 graphics card into the card cage. 4. Install two screws at the I/O connector panel to secure graphics card to the card cage. 5. Install the card cage to the HP WS460c Gen8 Expansion Blade. 6. Install power cables to the graphics card power connector located at the end with cooling fan. 7. Install access panel and reinstall the HP WS460c Gen8 Expansion Blade to the enclosure. The installation is complete.

No community discussion yet for this question.