HP0-S35 Exam Questions
206 real HP0-S35 exam questions with expert-verified answers and explanations. Page 1 of 5.
- Question #1
What is the minimum number of CPU sockets that must be populated in a BL890c i2?
- Question #2
Which HP tool can you use to detect and analyze server hardware bottlenecks?
- Question #3
Which filesystem can be used on a Linux operating system?
- Question #4
What is the name of the core-to-core transport mechanism used in Intel XEON processors?
- Question #5
A customer bought a new HP BladeSystem c7000 enclosure with HP Flex-10 interconnect modules. Which HP BladeSystem installation and startup Service is needed to implement the networ...
- Question #6
A customer needs many HP BladeSystem servers equipped with additional server options. The solution must be racked and cabled before delivery. Which HP service should be recommended...
- Question #7
You are planning the installation of a new HP BladeSystem c7000 enclosure with HP Virtual Connect Flex-10 modules. The customer expects that a Flex-10 configuration will be impleme...
- Question #8
An engineer installs four HP Virtual Connect Flex-10 10 Gb Ethernet modules into a c7000 enclosure. What is required to enable all Ethernet NICs on all servers to have access to an...
- Question #9
During a planning session, a customer is exploring virtualization solutions and asks if there is virtualization solution that can minimize downtime in case of server failure. Which...
- Question #10
What must be considered when updating a secured Linux server using HP Software Manager?
- Question #11
Which KVM is assigned Master Status in a cascaded configuration?
- Question #12
Which HP document provides up-to-date lists of tested drivers and firmware revisions for HP tape libraries?
- Question #13
Which action must be performed when adding a processor to an HP ProLiant BL460c server?
- Question #14
A customer wants to move an HP blade server from one bay to another within the same Virtual Connect domain. The customer requires that the server maintains the same WWNs MACs. What...
- Question #15
You plan to use SysFaultMgmt as the monitor for the hardware devices on an HP Integrity BL870c i2 Server Blade running HP-UX 11i v3. What is required for diagnostic mode?
- Question #16
Which interface should you use to check the software status of a server configured using the version control agent?
- Question #18
How can the administrator account password and DNS settings of the HP Virtual Connect Flex 10 Ethernet Module be restored to the original factory defaults?
- Question #19
A customer wants to update the SPP on five Windows 2008 R2 and five RHEL6 servers running in an HP Bladesystem C7000 chassis. What is the fastest way to achieve this?
- Question #20
Under Intelligent Provisioning Preferences, which options are available to update the System Software Update? (Select two)
- Question #21
You discovered a group of 20 blades in HP SIM and want to correctly configure and license them from Matrix Operating Environment. How do you achieve this with one easy-to-manage ta...
- Question #22
As an administrator, you are required to monitor maximum CPU time on system processes on all nodes within your environment. What can happen when a threshold is crossed more than th...
- Question #23
You set up an HP Integrity i2 blade running HP-UX for HP Insight Remote Support and want to test the solution. Which tool do you use to generate a test event?
- Question #24
Which HP tool can be used to upgrade the firmware of two Virtual Connect Ethernet modules at the same time?
- Question #25
You configured and installed the VCA on a server, but are unable to access VCRM using the administrator login credentials. What should you do?
- Question #26
What is recommended update order for the BladeSystem products without an operating system, with VC firmware 1.34 or later?
- Question #27
Which HP backup solution should a customer implement for zero downtime backup capability, multiple Hypervisor, and non-HP array support?
- Question #29
The Onboard Administrator screenshot below displays a c7000 enclosures showing the port mapping interconnect bay 3. New ProLiant BL460c blade servers are in 14. All newly installed...
- Question #30
After replacing an Onboard Administrator (OA). the firmware revision levels differ between the primary and secondary What is the fastest way to update the lower version?
- Question #31
A new c7000 enclosure is fully populated with power supplies but only half of the total power is available. How should the power mode be configured to have more power available and...
- Question #32
You are about to upgrade drivers in a SAN environment that has several large HP tape libraries. Where should you check to confirm that the new HBA driver has been tested?
- Question #33
How can a backup of the Virtual Connect Domain configuration be performed? (Select two.)
- Question #34
An engineer just added two DIMMs in a BladeSystem BL460c Gen8 server running Windows 2008 R2 the customer has to put the server back in production quickly. What should the engineer...
- Question #35
What is the maximum number of BL680c G7 servers you can install in a c7000 rack enclosure?
- Question #36
Which statement is correct about using an ESD strap when replacing a memory DIMM?
- Question #37
After a new installation has been completed on a server, which HP tool collects most information to establish baseline for firmware and driver revisions on that server?
- Question #38
Which view should you select to create a baseline or baseline group in VMware Vcenter Update manager version 4.1? HP HP0-S35 Exam
- Question #39
Which benefit does an SSD drive offer over an SAS hard drive?
- Question #40
What is the maximum number of hard drives that can be installed in a D2200sb Storage Blade?
- Question #41
In case of failure, which HP BladeSystem c7000 component is mandatory Customer-Self-Repair (CSR) and must be replaced by the customer?
- Question #43
Which features were added to the Hyper V role in Windows Server 2008 R2 (Select two)
- Question #44
What describes a single cold-aisle containment for rack placement in a data center?
- Question #45
Which functionality is enabled with the HP Insight Control for System Center management add-on?
- Question #46
Which HP PDU provides remote monitoring and has the ability to switch power on selected outlets?
- Question #47
What is an advantage of the HP D2200sb Storage Blade?
- Question #48
A customer is running a VMware vSphere cluster in a business critical production environment. Which step should be performed before servicing an HP server blade?
- Question #49
Which Gen8 server feature allows a customer to choose different connectivity options for the default network interface?
- Question #51
Before implementing a solution, which HP tool helps facility and IT staff size power infrastructure to meet HP BladeSystem solution requirements?
- Question #52
Which best practice can be considered when building an iSCSI network with high availability as a key deliverable?
- Question #53
When connecting an HP BladeSystem to a HP P4000 Storage System, which iSCSI initiator is required?
- Question #54
A customer wants to upgrade the memory and additional mezzanine cards in the company's HP c- Class blade servers. The customer is concerned about additional power requirements for...