H35-211_V2.5 Exam Questions
516 real H35-211_V2.5 exam questions with expert-verified answers and explanations. Page 3 of 11.
- Question #103
In the NGN system, () adopts packet technology to provide a unified integrated transmission platform with high reliability, QOS guarantee and large capacity.
- Question #104
Which of the following options belongs to the downstream wavelength of XGS-PON?
- Question #105
In GPON systems, congestion avoidance is achieved by actively discarding packets. Which of the following is a discard strategy that GPON does not support?
- Question #106
Which of the following statements about congestion avoidance is incorrect?
- Question #107
Which of the following options is correct about congestion avoidance?
- Question #108
On the OLT, debug commands are commonly used debugging tools. Which of the following is not a debug command?
- Question #109
After voice configuration is complete, the local number (08038878502) and the remote number (08038878501) can be registered normally on the IMS. However, every time I use this phon...
- Question #110
In a GPON network, a newly configured OLT cannot be managed properly by the network management server, but can be pinged successfully. Which of the following options is correct?
- Question #111
Which of the following descriptions of the HWTACACS protocol function is incorrect?
- Question #112
In GPON network protection, the following about Type Which of the descriptions of Type A and Type B is correct?
- Question #113
Regarding the OLT+MDU and OLT+ONT networking, which of the following statements about multicast capabilities is correct?
- Question #114
Deploying QoS can solve user service quality issues during network communications. Which of the following is not one of its purposes?
- Question #115
Which of the following options is a RADIUS feature?
- Question #116
Which of the following descriptions about the LACP protocol controlling the master-slave relationship of interconnected devices is incorrect?
- Question #117
Under IGMP snooping, two users request the same program under the OLT. The OLT sends two join messages to the multicast router.
- Question #118
Multicast technology effectively solves the problem of single-point transmission and multi-point reception and realizes efficient point-to-multipoint data transmission in IP networ...
- Question #119
When the ONT fails or the hardware needs to be upgraded, the ONT needs to be replaced. The ONT service needs to be removed on the OLT first, then the ONT terminal needs to be remov...
- Question #120
When Type C dual-homing protection is linked to uplink detection, if the OLT or OLT uplink fails, Type C dual-homing protection can switch to the other OLT.
- Question #121
OLT can support directly copying the user message priority as the priority of the forwarded message, and also supports direct local configuration.
- Question #122
In the Huawei U 2000 management system, access network elements can only be added one by one.
- Question #123
On the U2000 network management system, it is observed that the OLT PON port indicator light is not green, indicating that the PON port is faulty.
- Question #124
OLT equipment supports the use of permission templates to control the programs that multicast users can watch.
- Question #125
If there is a rogue ONU under the OLT PON port and the ONT is online, it will cause other ONTs or all ONTs under the same PON to go offline or go online frequently.
- Question #126
When configuring the VolP service on the U2000 network management system, voice-related parameters can be configured in the ONT value-added service general horizontal panel of the...
- Question #127
Consider 500 broadband users, with a concurrency rate of 40%, a transmittance of 50%, an online bandwidth of 4M, a duty cycle of 12.5%, a number of routes of 1, and a coverage rate...
- Question #128
The data multiplexing method of 10G GPON is similar to that of GPON, and the uplink still uses TDMA technology.
- Question #129
According to the token status in the token bucket, the device marks the message with color (green, yellow, red). The color of the mark is mainly to provide a basis for message proc...
- Question #130
In the GPON VOLF service, when the user picks up the phone and hears no tone or a busy tone, the possible cause is a user interface failure.
- Question #131
PPPOE dial-up simulation refers to simulating the user terminal to initiate the PPoE dial-up process on the access device. By analyzing the PPE dial-up simulation results, the netw...
- Question #132
License files control the management capabilities and functions of communications equipment. The Huawei U2000 management system also requires corresponding license files. Without a...
- Question #133
Similar to the command line configuration method, the MxU does not generally use the OMCI channel to deliver service configuration. In eSight, zero-configuration deployment is only...
- Question #134
The SIP protocol is a layered protocol, divided into 4 layers in total, among which the transaction layer is used to create or cancel client transaction instances.
- Question #135
If the quick leave function of multicast users is enabled, users can get a better service experience when switching channels.
- Question #136
Line failure is a common fault in GPON networks. Since it is a physical layer fault, eSight cannot monitor information such as the fiber status and line quality between ON and OLT.
- Question #137
In the general template for value-added services configured for the ONT on the U2000, the WAN port capability for WAN port management is enabled by default and needs to be changed...
- Question #138
For messages from the client, the VLAN tag carried in the message will be prioritized for flow matching. If no match is found and TLS service flow is deployed on the device, such m...
- Question #139
ITU-T G-984.2 standard defines four line protection methods in GPON networks.
- Question #140
GPON system only supports AES128 encryption in the downstream, 10G The PON system supports bidirectional AES encryption.
- Question #141
Single - mode optical fiber must be used in ODN networks.
- Question #142
If the configuration sent by OLT to ONU exceeds the capability of ONU, the configuration status of ONU will become failed.
- Question #143
The process of voice fault location can generally be divided into: eliminating external equipment faults, locating the fault to specific equipment, and locating the fault to a sing...
- Question #144
In the GPON voice service deployment, ONU devices can use SIP and H.248 protocols at the same time.
- Question #145
When creating a performance monitoring template in the NCE system, set the period to 15 minutes. The monitoring instance created based on the template will report the collection re...
- Question #146
For some campus networks, a single-layer VLAN can already meet the needs. When planning VLANs, C-VLAN and S-VLAN can plan the same VLAN ID. When creating service flows, the VLAN sw...
- Question #147
According to the agreement, the maximum distance of GPON port ranging compensation cannot exceed 60km, and the difference between the nearest and longest distances cannot exceed 20...
- Question #148
Multicast VLAN refers to the VLAN carried by multicast data, also known as NVLAN. VLANs with any attributes or types can become multicast VLANs, including Super VLANs.
- Question #149
The MSTP protocol is compatible with STP and RSTP and can make up for the shortcomings of STP and RSTP.
- Question #150
eSight provides the ONT device replacement function, which allows you to replace a faulty ONT with a new one while retaining the original device configuration data.
- Question #151
PON uses a single-fiber bidirectional transmission mode, so there is no single-pass failure.
- Question #152
POL is a campus LAN solution based on PON technology. It is a Layer 2 transmission network that provides gigabit access to user terminals and unified access to campus data, voice,...