H31-341_V2.5 Exam Questions
997 real H31-341_V2.5 exam questions with expert-verified answers and explanations. Page 3 of 20.
- Question #101
It mainly completes the point-to-point voice communication between adjacent stations, without dialing, and it can be connected immediately after off-hook. This PCM service is calle...
- Question #102
If the LED on the SCC board of the OSN 8800 T32 displays a value of 11, what is the subrack ID information?
- Question #103
Which of the following site types does not support business up and down?
- Question #104
On the network management system, the network element performance monitoring time is set to () minutes and () hours.
- Question #105
Which of the following statements about overhead bytes is wrong?
- Question #106
Which of the following is the role of the overhead TCM in ODUk?
- Question #107
Which port of the M40 is the output of the 3THz wavelength OTU single board connected to?
- Question #108
Which of the following is the adjustment unit of AU-PTR?
- Question #109
Which of the following protocols is used to complete the verification of TE links in the ASON network?
- Question #110
Which of the following boards can be inserted into the OSN 9800 U64 subrack?
- Question #111
Which of the following is the basic requirement of the DWDM system on the light source?
- Question #112
Which of the following statements about the definition of SDH is correct?
- Question #113
Which of the following descriptions about optical line protection and ODUk SNCP protection is wrong?
- Question #114
In daily maintenance scenarios, reset is one of the common operations. Which of the following descriptions about resetting a board is wrong?
- Question #115
Items for daily equipment maintenance, excluding:
- Question #116
Which of the following is not an advantage of WDM?
- Question #117
Which of the following is not a nonlinear effect?
- Question #118
Which of the following statements about the U2000 license is wrong?
- Question #119
Which of the following protection schemes does not require subnet configuration before subsequent protection operations when you configure services on a per-NE basis?
- Question #120
Which of the following description about the connection of NG WDM equipment to the network management computer is wrong?
- Question #121
Which of the following descriptions about pointer adjustment is correct?
- Question #122
Which layer is the TCP/UDP protocol located in the ICP/IP protocol stack?
- Question #123
How many 64K services can a 2M bandwidth support at most?
- Question #124
Which of the following statements is correct?
- Question #125
Which of the following is not a northbound interface provided by U2000?
- Question #126
Which of the following factors determine that the optical signal-to-noise ratio (OSNR) at the receiving end is reduced to a certain extent. After the signal is transmitted for a ce...
- Question #127
The unprotected chain consists of four network elements: NE1.NE2.NE3 and NE4. Create an end- to-end VC4 path NE1-NE4. Add NE5 between NE2 and NE3 for capacity expansion. The origin...
- Question #128
When creating a single-site optical crossover, an error message "The direction of the fiber cable is selected wrongly" appears. The possible reason is?
- Question #129
Which of the following unified line boards can support the crossover of VC, packet and ODUk at the same time?
- Question #130
Among the GSCC single boards of the following versions, which supported by the CF card?
- Question #131
When the OSN 8800 T32 cabinet emits an alarm beep, which of the following methods can be used to turn off the alarm beep?
- Question #132
Which of the following local maintenance terminals can be used to manage MSTP devices?
- Question #133
Which of the following description about the internal port properties of the Ethernet board is wrong?
- Question #134
Which of the following description of replacing the main control board is wrong?
- Question #135
Which of the following description about MPLS (Multiprotocol Label Switching) is wrong?
- Question #136
Which of the following bytes is the negative adjustment position of the TU pointer?
- Question #137
Which of the following statements about Raman amplification technology is wrong?
- Question #138
Which of the following is the basic requirement of the DWDM system for the light source?
- Question #139
The main difference between an open DWDM system and an integrated DWDM system is whether one of the following technologies is used?
- Question #140
Which of the following descriptions about the PANEL panel on OptiXtrans DC908 is wrong?
- Question #141
Which of the following descriptions about the TNG2M402D board is wrong?
- Question #142
Which of the following technologies is the IEEE802.3 standard formulated for?
- Question #143
Regarding the warning AU-AIS, which one of the following statements is correct.
- Question #144
Which of the following is not a function of RSVP-TE?
- Question #145
Which layer is the TCP/UDP protocol located in the TCP/IP protocol?
- Question #146
Which of the following description about the path method to create the Client path is wrong?
- Question #147
Which of the following effects was used in The Raman amplifier?
- Question #148
Which of the following difference between a wide area network and a local area network is correct?
- Question #149
ITU-T stipulates, what is the switching gain requirement of the Raman amplifier equal to how many DB?
- Question #150
In a WDM network, if both the bidirectional OA and OSC report an optical loss alarm, which is the most likely reason?