H12-821_V1.0 Exam Questions
1,196 real H12-821_V1.0 exam questions with expert-verified answers and explanations. Page 2 of 24.
- Question #51Network Security
Regarding the description of network address port translation (NAP) and network address translation only (No-PAT), which of the following statements is correct?
NATNo-PATNAPTaddress translation - Question #52IPv6 Technologies
If the network is IPv6, and the IP address of the host is configured in the stateless address configuration method, and other parameters except the address are obtained through DHC...
DHCPv6RA messageM bitO bit - Question #53Layer 2 Technologies
The RSTP protocol provides a variety of protection functions. For example, when the edge terminal port is configured in the protection state, the processing mechanism adopted by th...
RSTPedge portBPDU guardport protection - Question #54IPv4 Routing Technologies
Among the routing policy tools commonly used in BGP, the one that can be used to match a specific AS_path is:
BGPAS_path filterrouting policyroute filtering - Question #55IPv4 Routing Technologies
Which of the description about iBGP neighbors and eBGP neighbors is wrong?
BGPiBGPeBGPpeer relationships - Question #56IPv4 Routing Technologies
Which of the following strategies or tools cannot be applied to OSPF?
OSPFrouting policyas-path-filterroute filtering tools - Question #57IPv4 Routing Technologies
The IP protocol number of the VRRP message is:
VRRPIP protocol numberprotocol header - Question #58Network Security
In inter-zone packet filtering, which of the following options belongs to the outbound direction?
firewallinter-zone filteringtraffic directionsecurity zone - Question #59IPv4 Routing Technologies
In multicast, which of the following description of RP is wrong?
multicastRPshared treePIM - Question #60IPv4 Routing Technologies
Which of the following description about verifying whether a received Hello message is legal is wrong?
OSPFHello messagenetwork typenetwork mask validation - Question #61IPv4 Routing Technologies
Which of the following OSPF messages carries master-slave relationship information?
OSPFDD messagemaster-slave negotiationneighbor exchange - Question #62VRP Basics and Advanced Features
The default time interval for sending BFD detection packets is:
BFDdetection intervaldefault timerkeepalive - Question #63IPv4 Routing Technologies
Which of the following description of the information contained in the OPEN message in EGP is wrong?
BGPOPEN messageEGPAS number - Question #64IPv4 Routing Technologies
Which of the following statements about the IS-IS protocol is wrong?
IS-ISlink state protocolIGPCLNP - Question #65IPv4 Routing Technologies
The abstract information about display ospf peer output, which of the following description is correct? ``` <Huawei> display ospf peer OSPF Process 1 with Router ID 10.1.1.2 Neighb...
OSPFdisplay peer outputDR electionneighbor state - Question #66IPv4 Routing Technologies
Which of the following OSPF areas can only reach other areas through the default route?
OSPFtotally stub areadefault routearea types - Question #67Network Management and O&M
A distributed park network manages the network through the SNMP protocol. Which version of SNMP does the park manage?
SNMPSNMPv3network managementsecurity - Question #68VRP Basics and Advanced Features
When the BFD detection intervals at both ends are 30ms and 40ms respectively, which of the following option descriptions is correct?
BFDsession negotiationdetection intervaltimer negotiation - Question #69Network Security
The elements of the Server map table of the USG series firewall, excluding
USG firewallServer MapNATdestination IP - Question #70Network Security
If a packet is composed of 5-tuples, so which of the following options does not belong to the range of 5- tuples?
5-tuplepacket classificationsource MACnetwork fundamentals - Question #71VRP Basics and Advanced Features
Which of the following types of equipment is suitable for Huawei IP wide-area bearer network solution?
NetEngine 8000WAN bearerHuawei equipmentIP backbone - Question #72IPv4 Routing Technologies
Which of the following description about VRRP is wrong?
VRRPmaster electionprioritygratuitous ARP - Question #73VRP Basics and Advanced Features
The BFD detection number supported by the VRP version is:
BFDVRP versionprotocol versiondetection support - Question #74VRP Basics and Advanced Features
If two devices are connected, and one of them supports BFD detection function, while the other device does not support it, which functional feature of EFPD can be used by the devic...
BFDone-arm canaryEFPDlink detection - Question #75Network Security
Which layer of data packets does the packet filtering firewall inspect?
packet filtering firewallnetwork layerfirewall typesstateless inspection - Question #76Network Security
Instead of a company use the No-pat method of NAT to access the Internet. If all public IP addresses are used, what will happen to intranet users who access the Internet later?
NATNo-PATIP pool exhaustionaddress translation - Question #77IPv6 Technologies
When the payload is an ICMPv6 message, if the extension header is not considered, what is the value of the Next Header field in the IPv6 header?
IPv6Next HeaderICMPv6protocol number - Question #78IPv4 Routing Technologies
Part of the configuration of a router is shown in the figure, so which of the following descriptions about this part of the configuration is correct? ``` [HUAWEI]ip ip-prefix p1 in...
ip prefix-listgreater-equalless-equalprefix matching - Question #79IPv4 Routing Technologies
The following is part of the configuration information of the router Huawei. ``` [HUAWEI]ip as-path-filter 2 permit 200_300 [HUAWEI]ip ip-prefix p1 index 10.0.192.0 8 greater-equal...
route-policyAS-path filterBGPif-match clause - Question #80IPv4 Routing Technologies
Which of the following scenarios is not suitable for deploying interface policy routing?
policy routinginterface PBRlocal trafficISP egress - Question #81IPv4 Routing Technologies
Which of the following Hello messages does the IS-IS protocol not include?
IS-ISIIH messagesHello messagesP2MP - Question #82Layer 2 Technologies
IGMP Snooping mainly solves the problem of?
IGMP Snoopingmulticast floodingLayer 2 multicastmulticast control - Question #83IPv4 Routing Technologies
Using the IP prerequisite list shown in the figure for route matching, which of the following routes can be matched? ``` ip ip-prefix list1 index 10 permit 192.168.1.0 24 greater-e...
IP prefix listroute matchingprefix lengthgreater-equal less-equal - Question #84IPv4 Routing Technologies
Which of the following is an accurate description of the routing strategy, which is correct?
destination-based routingrouting tablepolicy-based routingforwarding - Question #85IPv4 Routing Technologies
The BGP protocol uses the peer default-route advertise command to advertise routes to neighbors. At the same time, which of the changes in the DGP routing table are correct?
BGP default routepeer default-route advertiseBGP routing tableroute advertisement - Question #86VRP Basics and Advanced Features
Under the VRP platform, which of the description about the default priority of each protocol is correct?
route prioritystatic routeadministrative distanceVRP routing - Question #87IPv4 Routing Technologies
The following is the BGP error output information of a router. ``` <Huawei>display bgp error Error Type: Peer Error Peer IP:10.1.1.2 AS:40139 Peer Address:10.1.1.2 Error Info:Route...
BGP troubleshootingRouter ID conflictBGP error messagespeer relationship - Question #88IPv4 Routing Technologies
Regarding the content contained in the UPDATE message, the wrong description is:
BGP UPDATE messagepath attributesBGP message typesroute withdrawal - Question #89Network Management and O&M
How long is the default lease period of the DHCP address pool?
DHCPaddress poollease periodIP address management - Question #90Network Management and O&M
BFD control packets are encapsulated in UDP packets for transmission, so the destination port number of the multi-hop BFD control packets is?
BFDUDP portmulti-hop BFDcontrol packets - Question #91Network Security
Which of the following statements about different types of firewalls is wrong?
stateful inspection firewallpacket filtering firewallsecurity policyfirewall types - Question #92Network Security
In the USG series firewalls, what is the security level of the Untrust area?
USG firewallsecurity zoneUntrust zonesecurity level - Question #93IPv4 Routing Technologies
Which of the following statements about the concept of multicast is wrong?
multicast conceptsmulticast sourcemulticast groupmulticast membership - Question #94IPv4 Routing Technologies
Which of the following BGP routing attributes is not a recognized attribute?
BGP attributesMEDwell-known attributesoptional attributes - Question #95IPv4 Routing Technologies
Regarding the OSPF multi-process description, the error is:
OSPF multi-processOSPF neighborsprocess isolationroute redistribution - Question #96IPv4 Routing Technologies
Which statement about RIB and FIB is wrong?
RIBFIBrouting tablepacket forwarding - Question #97Network Management and O&M
After purchasing a new network device, A network administrator, what method is usually used to configure the device for the first time?
console portinitial configurationdevice managementout-of-band management - Question #98Network Security
In the state detection firewall, when the state detection mechanism is enabled, when the second message (SYN+ACK) of the three-way handshake reaches the firewall, if there is no co...
stateful inspectionsession tableTCP three-way handshakefirewall security policy - Question #99IPv6 Technologies
Which of the following descriptions is wrong about the address function of NDP?
NDPNeighbor SolicitationICMPv6IPv6 address resolution - Question #100IPv4 Routing Technologies
Which statement about multicast packet forwarding is correct?
multicast forwardingRPF checkmulticast source addressIGMP Snooping