H12-811_V1.0 Exam Questions
982 real H12-811_V1.0 exam questions with expert-verified answers and explanations. Page 5 of 20.
- Question #202
The role of the OSPF protocol is
- Question #203
UDP is connectionless and must rely on () to ensure the reliability of transmission.
- Question #204
Use the command kdir test in the VRP operating platform. The system will create a directory named test.
- Question #205
Since the TCP protocol uses a three-way handshake mechanism when establishing a connection and closing a connection, TCP supports reliable transmission.
- Question #206
VRP operating system commands are divided into four levels: access level, monitoring level, configuration level, and management level. Which level can run various business configur...
- Question #209
What kind of packets does the OSPF protocol use to discover and maintain neighbor relationships? ()
- Question #210
VRP operating system commands are divided into four levels: access level, monitoring level, configuration level, and management level. Which level can run various business configur...
- Question #211
Using a traditional landline to make a call is a way of network communication. ()
- Question #212
In the VRP interface, use the command delete vrpcfg.zip to delete a file. The file must be emptied in the recycle bin to completely delete the file. ()
- Question #213
In what state does the OSPF protocol determine the master-slave relationship of DD. packets? ()
- Question #214
The following two configuration commands can realize the router RTA. The main and backup backup routes to the same destination 10.1.1.0: () (RTA)ip route--statiC.10.1.1.02412.1.1.1...
- Question #215
In the network shown in the figure below, the bridge ID of the switch has been marked. Enter the command stp rootsecondary on the sWD. switch and the following switch will become t...
- Question #216
If the Length of an Ethernet data frame/Type = 0x8100, which of the following statements is correct? ()
- Question #217
FAT AP can independently complete wireless user access, wireless user authentication, and business data forwarding without AC. ()
- Question #218
In the WLAN network architecture, terminal devices that support the 802.11 standard are called? ()
- Question #219
The following statement about static routing is wrong ()
- Question #220
Which of the following IPv4 addresses can be used by a host to directly access the Internet? ()
- Question #221
The switch becomes a logical switch after stacking and clustering, and Eth-Trunk across physical devices can be deployed to improve network reliability. ()
- Question #222
What is the value of TPID. defined by IEEE802.1Q? ()
- Question #223
When the Access type port sends a message, it will ().
- Question #224
The management of users by NAS devices is based on domains. Each user belongs to a domain, and a domain is a group composed of users belonging to the same domain. ()
- Question #225
Which of the following statements about Prefix Segment is wrong? ()
- Question #226
What is correct about the SNMP protocol? ()
- Question #227
The IPv6 address 2001: ABEF:2240E:FFE2:BCC0:CD0:DDBE:8D58 cannot be abbreviated. ()
- Question #228
Which state does the 0SPF protocol use to indicate that the adjacency relationship has been established? ()
- Question #229
The tracert diagnostic tool in Huawei routers is used to track the data forwarding path. ()
- Question #230
There are multiple route entries to the same destination network in the routing table. These routes are called? ()
- Question #231
The broadcast address is a special address that all the host bits in the network address are set to, and it can also be used as a host address. ()
- Question #232
Which of the following OSCan PF protocol packets ensure the reliability of LSA update? ()
- Question #233
The last option field (option) of 1Pv4 is variable-length optional information. What is the maximum length of this field? ()
- Question #234
Which of the following advantages does the single-arm routing approach achieve inter-VLAN routing and intercommunication? ()
- Question #235
The switch receives a unicast data frame. If the destination MAC of the data frame can be found in the MAC table, the data frame will be forwarded from the corresponding port of th...
- Question #236
The output information of the link aggregation port of a certain switch is as follows. If you want to delete Eth-Trunk1, which of the following commands is correct? ()
- Question #237
Which information of the data frame is used by the VLANIF interface to determine whether to perform Layer 2 or Layer 3 forwarding? ()
- Question #238
If the value of the ypeLength field of an Ethernet data frame is 0x0800, the length of the upper layer message header carried by this data frame is in the range of 20-60B. ()
- Question #239
When using FTP for file transfer, how many TCP connections will be established? ()
- Question #240
In order to join the wireless network STA. The wireless network information needs to be obtained first. Which of the following messages is used by the STA to actively obtain the SS...
- Question #241
In a broad sense, the transmission medium that constitutes the wireless local area network wlan does not include? ()
- Question #242
Which field of the ipv6 packet header can be used for QoS? ()
- Question #243
After the network administrator uses the TracertRoute function on the router device, in the data packet sent by the router, the value of the Protoco1 field in the IPv4 header is? (...
- Question #244
The switch is connected to the host. What is the common port link type of the switch? ()
- Question #245
When using the FTP protocol to upgrade the router software, the transmission mode should be selected ()
- Question #246
The network structure and 0$PF partition are shown in the figure. In the figure, except for RTA., the routers RTB.RTC. and RTD. are ABR routers. () (RTA) ip route-statiC.10.1.1.024...
- Question #247
The network administrator hopes to be able to effectively use the P address of the 192.168.176.0/25 network segment. Now that the company's marketing department has 20 hosts, which...
- Question #248
What is the main function of the dynamic routing protocol? ()
- Question #249
The device port running the STP protocol is in the Forwarding state. Which of the following statements are correct? ()
- Question #250
The following description about the specified port of the spanning tree is correct ()?
- Question #251
Which of the following statements about link aggregation are correct? ()
- Question #252
What is the total length of the VLAN frame format defined by IEEE802.1Q? ()
- Question #253
CSS refers to the combination of two switch devices that support cluster features. Logically combined into one switch device. ()