A company has deployed multiple APs in its office area. To improve the convenience of network deployment, the user hopes that WAC will automatically assign channels to APs based on the wireless…

Question

Options

• AConfigure the command calibrate Auto-charnel-select Disable
• BThe radio-mode 2radio-independent-scan command is configured
• CConfigure the command calibrate Auto-txpower select enable
• DConfigure the command undo terminal-identify Disable

• A
  70% (28)
• B
  8% (3)
• C
  5% (2)
• D
  18% (7)

Explanation

Option A is correct because the command calibrate auto-channel-select disable explicitly disables the automatic channel selection feature on the WAC, directly preventing it from assigning channels to APs automatically - which is exactly the symptom described. Option B (radio-mode 2radio-independent-scan) enables each radio to scan independently for calibration, which supports RF tuning rather than blocking it. Option C (calibrate auto-txpower-select enable) enables automatic transmit power adjustment, another part of RF tuning that would help rather than hinder it. Option D (undo terminal-identify disable) is unrelated to RF channel calibration and would not affect whether RF tuning takes effect.

Memory tip: Watch for the word "disable" in calibration commands - on Huawei WAC, auto-channel-select must be enabled for RF tuning to work, so any command that disables it is an instant red flag. Think: "disable = dead channel tuning."

No community discussion yet for this question.