To change the initial IP address of an IAD in web mode, connect the physical network of the PC to that of the IAD and set the IP address of the PC to the same network segment of the IP address of…

The correct answer is A. TRUE. Option A is correct because accessing an IAD's (Integrated Access Device) web-based management interface requires network reachability - your PC must be on the same IP subnet as the IAD's default management IP to reach its web GUI. For example, if the IAD ships with a default…

Question

To change the initial IP address of an IAD in web mode, connect the physical network of the PC to that of the IAD and set the IP address of the PC to the same network segment of the IP address of the IAD.

Options

ATRUE
BFALSE

How the community answered

(37 responses)

A
76% (28)
B
24% (9)

Explanation

Option A is correct because accessing an IAD's (Integrated Access Device) web-based management interface requires network reachability - your PC must be on the same IP subnet as the IAD's default management IP to reach its web GUI. For example, if the IAD ships with a default IP of 192.168.1.1/24, your PC must be configured with an address like 192.168.1.x/24 and connected to the same physical network segment before you can open a browser and log in to change that IP.

Option B is incorrect because there is no alternative method implied - skipping the same-subnet requirement would leave the PC unable to route packets to the IAD's web interface, making configuration impossible.

Memory tip: Think of it like a key fitting a lock - both devices must "speak the same network language" (same subnet) before the door (web interface) opens. Same segment = same conversation.

Community Discussion

No community discussion yet for this question.

Full H11-811 Practice