GB0-363 Exam Questions
123 real GB0-363 exam questions with expert-verified answers and explanations. Page 1 of 3.
- Question #1IPv6 Network Design
Which of the following descriptions about dynamic routing protocol is correct?
RIPngOSPFv3MBGPIS-IS IPv6 - Question #2IPv6 Network Design
Which of the following IPv6 tunnels is/are automatically established?
IPv6 tunnelingISATAP6to4 tunneltransition mechanisms - Question #3Network Performance Optimization
Compared with SNMPv1, SNMPv2c has made the improvements including .
SNMPv2cSNMP operationscounter64error codes - Question #4Enterprise Network Design Methodology
The topology applicable for the core layer is .
core layer designnetwork topologyfull-meshpartial-mesh - Question #5Enterprise Network Design Methodology
The requirements to the access layer in LAN should include .
access layerLAN designinterface typeshierarchical network - Question #6Advanced Switching Technologies
RSTP is defined in .
RSTPIEEE 802.1Wspanning tree standardsSTP evolution - Question #7Advanced Switching Technologies
Which VLAN division mode cannot coexist with others?
VLAN divisionMAC-based VLANprotocol-based VLANVLAN coexistence - Question #8Advanced Switching Technologies
Which of the following does not define the TCN packet?
TCNtopology change notification802.1Dspanning tree standards - Question #9Advanced Switching Technologies
Superiority of the MSTP to the STP includes .
MSTPSTP comparisonspanning tree instancesProposal/Agreement mechanism - Question #10High Availability and Reliability Design
We usually do not choose the equipment with key module redundancy to backup at the access layer. And dual-uplink backup should be used instead of dual-system backup.
access layer redundancydual-uplinkmodule redundancybackup design - Question #12MPLS and VPN Technologies
VPNs that provide data encryption include IPSec VPN, SSL VPN, DVPN 1.0 and DVPN 2.0.
VPN encryptionIPSec VPNSSL VPNDVPN - Question #13MPLS and VPN Technologies
Which of the following descriptions about VPN is correct?
VPN definitionsecure tunnelpublic networkVPN concepts - Question #14Network Security Design
The security services in the Open System Interconnection security architecture include () and anti-DoS. 1) Authentication 2) Access control 3) Data privacy service 4) Data integrit...
OSI security architectureauthenticationdata integrityaccess control - Question #15Enterprise Network Design Methodology
During the IP address planning for an enterprise network, we should use the private addresses in principle. In case of insufficiency of the private address space, we can use the pu...
IP address planningprivate addressingNATpublic addresses - Question #16Enterprise Network Design Methodology
Which of the following should be taken into consideration during the IP planning?
IP planningaddress uniquenessaddress continuityaddress conservation - Question #18Advanced Routing Protocols
If the data link layer protocol in the OSPF P2P network is PPP, two OSPF routers whose interface addresses are in different subnets can still establish adjacency and learn the rout...
OSPF P2PPPP linkadjacency formationsubnet mismatch - Question #19Advanced Routing Protocols
The ABR is defined in OSPF as .
OSPF ABRbackbone areaarea border routerOSPF areas - Question #20Advanced Routing Protocols
The difference between Stub area and Total Stub area in OSPF is the different processing of .
OSPF stub areatotal stub areaLSA type 3LSA filtering - Question #22Advanced Routing Protocols
The static routing can provide backup and load balancing for the dynamic routing.
static routingdynamic routing backupfloating static routesload balancing - Question #23Enterprise Network Design Methodology
Which of the following descriptions about VLSM is wrong?
VLSMclassless routingclassful routingIP subnetting - Question #25Network Performance Optimization
Which is the descending sequence of the ATM services in terms of the service quality?
ATMQoS service categoriesCBRVBR - Question #26Enterprise Network Design Methodology
The dialing line is used in .
dial-upremote accessline backupWAN connectivity - Question #28MPLS and VPN Technologies
The DLCI numbers at both ends of the Frame Relay network must be identical.
Frame RelayDLCIlocal significanceWAN - Question #29Enterprise Network Design Methodology
An enterprise has only one public address and uses Email, DNS and Web servers to provide external services, which of the following should be used to solve the problem?
static port NATPATpublic IPserver mapping - Question #31Enterprise Network Design Methodology
Which of the following should be taken into consideration to choose the routing protocol for a large-sized network?
routing protocol selectionscalabilityconvergencenetwork design - Question #32Advanced Routing Protocols
Which of the following is/are correct when deploying BGP in a large-sized network?
BGProute reflectorroute aggregationBGP damping - Question #34Advanced Routing Protocols
BGP sends route update through UDP.
BGPTCPtransport protocol - Question #35Advanced Routing Protocols
The black hole route cannot be imported into BGP.
BGPblack hole routeroute importnull route - Question #36Network Security Design
The common security equipment includes the Firewall, Intrusion Detection System (IDS) and Intrusion Prevention System (IPS). The IDS serves as the gateway and is deployed on the pa...
IDSIPSfirewallsecurity deployment - Question #37Enterprise Network Design Methodology
Which of the following descriptions about the POS, ATM and fast Ethernet technologies is/are correct?
ATMPOSFast EthernetWAN technology comparison - Question #38Enterprise Network Design Methodology
The ring topology is featured by .
ring topologynetwork redundancynetwork delaytopology comparison - Question #39Enterprise Network Design Methodology
The first step of network demand analysis is to collect user demands. Which of the following are the sources based upon?
demand analysisrequirements gatheringnetwork design methodology - Question #40Enterprise Network Design Methodology
Which of the following descriptions about the network core layer is correct?
core layerhierarchical network designthree-tier model - Question #41Enterprise Network Design Methodology
The service provider equipments used in WAN connection is invisible to the network designer.
WANservice providernetwork visibilityCPE - Question #42Network Security Design
Which layers of the hierarchical model is the ACL usually applied at?
ACLaccess layerconvergence layerhierarchical model - Question #43Network Performance Optimization
Which of the following has the strict priority?
PQLLQWFQstrict priority queuing - Question #45Network Performance Optimization
Which of the following descriptions about DSCP is/are correct?
DSCPToSQoSIP Precedence - Question #46MPLS and VPN Technologies
Which of the following can be used for transmitting multicast over a non-multicast network?
multicastGRE tunnelL2TPnon-multicast network - Question #47Advanced Routing Protocols
PIM-SM can be used in the NBMA network.
PIM-SMNBMAmulticast routing - Question #49MPLS and VPN Technologies
The IP address planning should be taken into account during the IPSec VPN deployment. The branch node should use the IP address segments that can be aggregated. How many IPSec SAs...
IPSecSecurity Associationencryption ACLVPN - Question #50MPLS and VPN Technologies
Which of the following equipment in the L2TP VPN can initiate L2TP connection?
L2TPLACLNSVPN tunnel - Question #51Advanced Routing Protocols
Which of the following can be used to decrease the size of the BGP routing table during the BGP deployment in a large-sized network?
BGProute aggregationroute filteringrouting table optimization - Question #52Advanced Routing Protocols
Which of the following descriptions about IBGP and EBGP is/are correct?
IBGPEBGPBGP peeringnext-hop attribute - Question #53Advanced Routing Protocols
Which of the following descriptions about the BGP route aggregation is correct?
BGProute aggregationAS-Pathroute advertisement - Question #54Advanced Routing Protocols
There are three lines between the branch and the central office of a bank. It requires that different services use different links and needs mutual backup. Which of the following d...
BGPMEDLocal-Preferencetraffic engineering - Question #57Enterprise Network Design Methodology
Which of the following should be taken into consideration during equipment selection?
equipment selectionreliabilityscalabilityforwarding performance - Question #58Enterprise Network Design Methodology
Which of the following descriptions about IP address planning is/are wrong?
IP address planningMPLS VPNsubnettingroute aggregation - Question #59Enterprise Network Design Methodology
What advantages does the hierarchical network model have?.
hierarchical network modelscalabilitymanageabilitynetwork design - Question #60Enterprise Network Design Methodology
Which of the following descriptions about the network equipment is/are correct?
CPU-basedASIC-basedNP-basedforwarding architecture - Question #61Enterprise Network Design Methodology
To facilitate management in future, which of the following items should be contained in the name of an equipment?
equipment namingnaming conventionnetwork management