E20-545 Exam Questions
233 real E20-545 exam questions with expert-verified answers and explanations. Page 4 of 5.
- Question #152
A customer plans to connect a new Windows 2012 host to a new VNX array. The customer's application requires LUNs that are aligned at 2048 blocks. What should you advise?
- Question #153
You install a new Emulex HBA in a Linux host. Which host utility can you use to view configuration information about the new HBA?
- Question #154
You install a new Qlogic HBA in a Linux host. Which host utility can you use to view configuration information about the new HBA?
- Question #155
A customer is planning to add a new VNX array to their ESXi environment. What VMware feature can provide hardware acceleration?
- Question #156
A customer is planning to add a new VNX array to their ESXi environment. What benefit will the VAAI plug-in provide?
- Question #157
You have a customer environment where deployment time is crucial. Disaster Recovery setup is a "must have" for production. There is a 10 Gbe network infrastructure between the site...
- Question #158
You are designing the optimal networking environment for an ISP. According to the customer, high availability is more important to them than bandwidth. What should you ask about fi...
- Question #159
In VNX OE for File, which type of device is used to logically reduce disk volumes into smaller partitions to improve usage?
- Question #160
In VNX OE for File, which type of device is used for performance by spreading the volume across multiple LUNs that can be active concurrently?
- Question #161
What is the default file system type for the VNX?
- Question #162
A customer presents a variety of storage LUNs to the ~fileserver Storage Group and begins provisioning VNX OE for File storage. AVM detects both thick and thin Pool LUNs. How does...
- Question #163
After configuring block storage for File usage, a Storage Administrator has a large number of dVols available for use. How many dVols will be consumed during the creation of the fi...
- Question #164
After configuring a block storage pool for File usage, a Storage Administrator has a large number of dVols available for use. How many dVols will be consumed during the creation of...
- Question #165
A Storage Administrator receives a call from a customer who says they can see the lost+found directory. How can the Storage Administrator hide this directory from the host users?
- Question #166
From Unisphere, a Storage Administrator created an NFS export and alerted a user that the exported file system was ready to be mounted. The user was able to access the export but w...
- Question #167
A small university department uses Unix-based workstations with local password files for security and access. They now want to expand and use the VNX for additional storage. Which...
- Question #168
Your customer has a requirement for multiple ESXi 5.1 hosts to simultaneously access volumes and run multiple VMs in their VNX for File environment. How should you provide storage?
- Question #169
A VNX customer has configured multiple CIFS servers and IP interfaces for general office use. CIFS servers are configured both on the physical Data Mover and also on multiple Virtu...
- Question #170
A customer decided to add CIFS share access to an existing VNX for File implementation. You are making recommendations to ensure maximum server portability for local load balancing...
- Question #171
What is an important consideration when designing a VDM solution?
- Question #172
What are important considerations when designing a VDM solution?
- Question #173
A customer requires anti-virus checking in their VNX for File implementation. They are planning to configure CIFS servers in multiple domains, using VDMs to host the CIFS servers....
- Question #174
Your customer has an existing VNX for File implementation which is entirely managed via Unisphere using EMC's best practice recommendations. The Windows clients are Windows 7 Pro....
- Question #175
A large, enterprise-level customer recently purchased a pair of VNX Gateways with VMAX backend storage arrays to provide File services. Their requirements include the ability to ha...
- Question #176
A customer has a Microsoft Server 2008 R2 using VNX block storage. They are looking at multipathing options to ensure failover and load-balancing. Following the EMC best practices,...
- Question #177
A solution has been designed for a customer in which several ESX servers are connected to a VNX array through iSCSI. The customer created two separate networks to isolate the iSCSI...
- Question #178
A customer plans to deploy SharePoint on a VNX array. They ask about the requirements to implement BLOB externalization. What do you tell the customer?
- Question #179
What is the purpose of the Usermapper on VNX?
- Question #180
What is a characteristic of secmap?
- Question #181
Which VNX virtual device can be deployed independently of pre-existing customer Ethernet configurations?
- Question #182
You are trying to create a virtual network device in Unisphere. There are four physical network connection devices on the Data Mover, but only two appear on the Unisphere device cr...
- Question #183
Which statement describes the Reserved LUN Pool?
- Question #184
An environment contains five LUNs of 65 GB each, and five LUNs of 35 GB each. Each of the LUNs will have a SnapView Snapshot created on it. What is a recommended configuration of t...
- Question #185
An environment contains five LUNs of 160 GB each, and five LUNs of 140 GB each. Each of the LUNs will have a SnapView Snapshot created on it. What is the recommended configuration...
- Question #186
A customer has an environment consisting of 25 classic LUNs of 100 GB each that hold data from a custom application, and 15 thick LUNs of 50 GB each that are used for a database ap...
- Question #187
A customer has an environment consisting of 20 classic LUNs of 150 GB each that hold data from a custom application, and 5 thick LUNs of 500 GB each that are used for a database ap...
- Question #188
A customer has a VNX system that uses only RAID 5 configured as 4+1 groups. The VNX model supports a maximum of 250 drives. They intend to use Clones for local replication and back...
- Question #189
A customer has a VNX system that uses only RAID 6 configured as 6+2 groups. The VNX model supports a maximum of 500 drives. They intend to use Clones for local replication and back...
- Question #190
A 512 GB LUN has three clones. While Clone 1 is fractured, and Clones 2 and 3 are in the non- fractured state, a secondary host performs 200 random writes of 4 kB to Clone 1. Clone...
- Question #191
What is a characteristic of SnapView Clones?
- Question #192
A customer wants to use a point-in-time copy of their production data for data mining purposes. They are concerned that the copy will have a performance impact on the production LU...
- Question #193
In terms of Redirect on Write technology, which object class has the Auto-Delete policy enabled by default?
- Question #194
A host has visibility to a VNX Snapshot attached to a Snapshot Mount Point (SMP). The user has detached the original snapshot and has attached a later snapshot to this SMP. What mu...
- Question #195
A customer is testing VNX Snapshot actions on their new VNX array. They plan to make a point- in-time copy accessible to the host and then remove the point-in-time copy from the ho...
- Question #196
When using VNX Snapshots, where is the snapshot data stored?
- Question #197
A customer has a requirement for restartable backups of an SQL database and the SQL log LUN. How can this requirement be met?
- Question #198
A customer has a requirement for backups of VNX Pool LUNs but is concerned about impacting performance on the production LUNs. How can the impact on performance be minimized?
- Question #199
For VNX SnapSure, how many blockmaps exist per file system?
- Question #200
For VNX SnapSure, how many bitmaps exist per file system?
- Question #201
In a SnapSure implementation of a 20 GB production file system, what is the default SavVol configuration?