DES-DD23 Exam Questions
58 real DES-DD23 exam questions with expert-verified answers and explanations. Page 1 of 2.
- Question #1
Refer to the exhibit. To which shelf and port should SAS HBA slot 1 port B be connected?
- Question #2
When using CIFS from a PowerProtect DD system, what should be changed on a Windows machine?
- Question #3VxRail Appliance Concepts and Architecture
What is the maximum capacity for a DDVE?
DDVEmaximum capacityPowerProtect DDvirtual edition limits - Question #4VxRail Appliance Troubleshooting and Maintenance
A technician is upgrading a DD9400 with a DS60 expansion shelf with 60 drives. In the GUI interface, only 30 drives are accessible. What is causing these drives to be inaccessible?
DD9400DS60 expansion shelfcapacity licensedrive accessibility - Question #5VxRail Appliance Installation and Configuration
What is a requirement to configure the PowerProtect DD tape out to cloud feature?
tape out to cloudcloud tier capacity licensePowerProtect DDVTL - Question #6VxRail Appliance Installation and Configuration
A PowerProtect DD system is configured for VTL. The backup application requires a minimum tape capacity of 800 GB. What is the minimum tape type to support this requirement?
VTLLTO tape capacitytape type selectionbackup requirements - Question #7
A customer needs an upgrade on their DD6900 to use HA. Which expansion shelf is required?
- Question #8VxRail Appliance Management and Operations
When using the DD VTL Tape Out to Cloud feature, which status will a tape show once it is in the cloud tier vault?
VTL tape out to cloudcloud tier vaulttape statusoffsite - Question #9VxRail Appliance Troubleshooting and Maintenance
An administrator is migrating their old cloud tier-enabled Data Domain to a new PowerProtect DD appliance with cloud tier. During migration, the administrator recognizes that file...
cloud tier migrationrestricted modefilesystem cleaningData Domain migration - Question #10VxRail Appliance Installation and Configuration
An administrator is scaling Cloud Tier for a DD9400 by adding a second cloud unit. What is the required amount of metadata storage (TB)?
cloud tier scalingDD9400metadata storagesecond cloud unit - Question #11VxRail Appliance Management and Operations
A PowerProtect DD appliance has been installed at a company's location for several months and has reached a steady state. As a best practice, at what percentage of disk utilization...
disk utilization thresholdcapacity best practicessteady statePowerProtect DD - Question #12
Which enterprise applications does the DDBEA agent support?
- Question #13VxRail Appliance Installation and Configuration
An administrator is configuring a Google Cloud Provider cloud unit on their DD9900. Which certificate must be imported before adding the cloud unit?
Google Cloud cloud unitcertificate importDD9900GlobalSign Root - Question #14VxRail Appliance Troubleshooting and Maintenance
Backup administrators have noticed slow backups on the AIX environment. To fix the issue, what should the set large_send be for each NIC, and what should the NFS option be set to?
AIX backup performanceNIC large_sendNFS rfc1323slow backup troubleshooting - Question #15VxRail Appliance Installation and Configuration
An administrator is configuring an Azure cloud unit on their DD6900. Which certificate must be imported before adding the cloud unit?
Azure cloud unitcertificate importDD6900Baltimore CyberTrust - Question #16VxRail Appliance Concepts and Architecture
Which of the following protocols are supported by PowerProtect DD for data movement to a cloud provider?
cloud data movement protocolsCIFSNFSPowerProtect DD cloud - Question #17
What are some key benefits of performing backups and recoveries with a PowerProtect DD appliance?
- Question #18PowerProtect DD Concepts and Architecture
A customer needs to use DD Retention Lock Compliance to ensure that data integrity is maintained. Which PowerProtect DD systems meet the customer's requirement?
DD Retention Lock Compliancehardware model supportDD3300DD9400 - Question #19PowerProtect DD Implementation
When the PowerProtect DD system boots up for the first time, the CLI configuration wizard script does not start automatically. Which command can be used to start the script manuall...
CLI configuration wizardinitial setupconfig setup command - Question #20PowerProtect DD Troubleshooting and Maintenance
What are some possible network bottlenecks for a PowerProtect DD?
network bottleneckswire speedrouting protocolsperformance - Question #21PowerProtect DD Management
What can be used to monitor system utilization?
system monitoringutilizationalert messages - Question #22PowerProtect DD Concepts and Architecture
Which protocol is used for communications between a PowerProtect DD appliance and cloud tier to Dell EMC ECS?
cloud tierDell EMC ECSHTTPSprotocol - Question #23
A backup administrator has enabled the Retention Lock feature on their PowerProtect DD appliance. Over time, the administrator noticed an increase in file system utilization. Upon...
- Question #24PowerProtect DD Concepts and Architecture
A customer needs a backup system to protect 100 TB of mission-critical dat
capacity planninghardware selectionmission-critical dataDD6900 - Question #25PowerProtect DD Management
A backup administrator is tasked with verifying the compression savings of a PowerProtect DD9900. Which compression algorithm will they see enabled by default?
compression algorithmgzfastDD9900DDOS - Question #26PowerProtect DD Management
Which PowerProtect DD procedure uses the DoD/NIST standards to provide data security?
data sanitizationDoD/NIST standardsdata securitycompliance - Question #27
Which component executes the read/write requests in a backup environment consisting of a PowerProtect DD appliance and IBM Spectrum Protect?
- Question #28PowerProtect DD Concepts and Architecture
Which component of PowerProtect DD is Data Invulnerability Architecture a feature of?
Data Invulnerability ArchitectureDDOSdata integrity - Question #29PowerProtect DD Concepts and Architecture
Which are supported compression algorithms in DDOS?
compression algorithmslzgzgzfast - Question #30
What happens to the data when it is moved from the active tier to cloud tier?
- Question #31
An administrator recognizes poor network performance when using CIFS shares from a PowerProtect DD system. The network link utilization is under 100%. What is the most likely cause...
- Question #32
Which port/protocol is used when using a syslog server to monitor a PowerProtect DD system?
- Question #33
A PowerProtect DD appliance with two expansion shelves is being installed in a customer- provided rack. When cabling the controller to the shelves, what is connected to the host po...
- Question #34PowerProtect DD Implementation
Which command is used to start the initial CLI configuration wizard?
CLI configuration wizardinitial setupconfig setup command - Question #35
What system role is required to create the second security officer for a PowerProtect DD?
- Question #36PowerProtect DD Implementation
A backup administrator needs to implement BoostFS for Windows. What do they need to install on the Windows server?
BoostFSWindowsCBFSDD Boost - Question #37
An organization uses tape libraries in their current backup infrastructure. They have purchased a PowerProtect DD system and plan to use VTL to move from physical tape. What is a c...
- Question #38
An engineer is configuring a PowerProtect DD system for VTL using Fibre Channel. How should the zones be configured?
- Question #39
An administrator monitors the performance statistics of a PowerProtect DD appliance. Low disk- write rates are shown, and the network inbound traffic is high. What is the most like...
- Question #40
The finance department requires PDFs older than 90 days to be archived through Cloud Tier into Azure Blob Storage. They want any PDFs older than 180 days archived into AWS S3. Whic...
- Question #41
An engineer is deploying two PowerProtect DD6900 systems in an HA pair. The installation includes ES40, DS60, and FS25 expansion shelves. What consideration should be made when cab...
- Question #42
A backup administrator is tasked with monitoring PowerProtect DD capacity metrics. The administrator is backing up 2 TB of data daily with a reduction rate at 5x. After data reduct...
- Question #43PowerProtect DD Management
What is the preferred method to ensure backups are protected against deletion or corrupt?
Retention Lockdata protectionbackup integritydeletion prevention - Question #44
An administrator has retained snapshots for a single MTree and is trying to create a new one. An error message is received. What is the reason for the failure?
- Question #45PowerProtect DD Troubleshooting and Maintenance
A storage administrator finished the zoning between the PowerProtect DD and the NetWorker backup server. How can they verify that the zoning was completed properly and the server H...
SAN zoningscsitargetHBA visibilityFC connectivity - Question #46PowerProtect DD Management
Which command is used to check if NFS is enabled?
NFSnfs status commandprotocol management - Question #47PowerProtect DD Concepts and Architecture
What is a requirement to use the PowerProtect DD HA feature?
high availabilityHAshared storagehead unit - Question #48PowerProtect DD Implementation
What rule must be followed during an upgrade procedure with the FS25 expansion shelf?
FS25 expansion shelfupgrade procedureshelf cablingchain configuration - Question #49
What is the maximum number of concurrently active virtual tape library instances on each PowerProtect DD appliance?
- Question #50
Which types of replication are supported in a PowerProtect DD appliance?