Refer to the output shown: console (config-if-Tel/0/1) #switchport general allowed vlan add 2-6 console (config-if-Tel/0/1) #show interfaces switchport tengigabitethernet 1/0/1 Port: Tel/0/1 VLAN…

Refer to the output shown:

console (config-if-Tel/0/1) #switchport general allowed vlan add 2-6 console (config-if-Tel/0/1) #show interfaces switchport tengigabitethernet 1/0/1 Port: Tel/0/1 VLAN Membership Mode: General Mode Access Mode VLAN: 1 (default) General Mode PVID: 1 (default) General Mode Ingress Filtering: Enabled General Mode Acceptable Frame Type: Admit All General Mode Dynamically Added VLANs:

General Mode Untagged VLANs: 1-6 General Mode Tagged VLANs:

General Mode Forbidden VLANs:

Trunking Mode Native VLAN: 1 (default) Trunking Mode Native VLAN Tagging:

Disabled Trunking Mode VLANs Enabled: All Private VLAN Host Association: none Private VLAN Mapping:

Private VLAN Operational Bindings:

Default Priority: 0 Protected: Disabled Te1/01 interface must allow VLANs 2-6 and follow the 802.1Q standard. Which change should be made to meet the requirements?