ACMP_6.1 Exam Questions
162 real ACMP_6.1 exam questions with expert-verified answers and explanations. Page 1 of 4.
- Question #1
Which Aruba controllers are able to provide IEEE 802.3af POE? (Choose all the correct answers.)
- Question #2
Which of the following controllers has an integrated single radio AP?
- Question #3
What is the maximum number of campus APs supported by a 620 controller?
- Question #4
Which access point models support concurrent operations in both the "b/g" band as well as the "a" band? (Choose all the correct answers.)
- Question #5
Which of the following APs do not support dual radio operations? (Choose all the correct answers.)
- Question #6
Which of the following APs support remote AP operation?
- Question #7
An Aruba based network has a Master and three local controllers. No APs terminate on the Master controller. If IDS is desired, so the administrator wants to install the "RFProtect...
- Question #8
What do you need to generate a feature license key for an Aruba controller?
- Question #10
The permanent licenses on the controller will be deleted with the use of which command?
- Question #11
Which statement is true about the Content Security License?
- Question #12
What is the best practice regarding licensing for a backup master to support Master Redundancy?
- Question #13
Which may be applied directly to an interface? (Choose all the correct answers.)
- Question #14
What new firewall action was added specifically for use with Aruba's Content Security Service?
- Question #15
When creating a firewall policy, which of the following parameters are required? (Choose all the correct answers.)
- Question #16
In all unmodified default AAA profiles, in which default initial role is the user placed?
- Question #17
When are the system-defined default roles added to the configuration on the controller?
- Question #18
When a user first associates to the WLAN, what role are they given?
- Question #19
Which of the following could be used to set a user's post-authentication role or VLAN association? (Choose all the correct answers.)
- Question #20
Which describe "roles" as used on Aruba Mobility Controllers? (Choose all the correct answers.)
- Question #21
Which netdestination aliases are built into the controller? (Choose all the correct answers.)
- Question #22
What are aliases used for?
- Question #23
Which of the following statements allows a user to initiate an HTTP session to other devices?
- Question #24
The Aruba Policy Enforcement Firewall (PEF) module supports destination network address translation (dst-nat). Which is a common use of this statement in an Aruba configuration?
- Question #25
The Aruba Policy Enforcement Firewall (PEF) module supports source network address translation (src-nat). Which is a common use of this statement in an Aruba configuration?
- Question #26
The network administrator wishes to terminate the VPN encryption on the Aruba controller. When writing a firewall rule to accomplish the task of automatically moving the VPN traffi...
- Question #27
Based on the above output from an Aruba controller, an unauthenticated user assigned to the logon role attempts to start an http session to IP address 172.16.43.170. What will happ...
- Question #28
Refer to the following configuration segment for this item. `ip access-list session anewone user network 10.1.1.0 255.255.255.0 any permit user host 10.1.1.1 any deny user any any...
- Question #29
Refer to the following configuration segment for this item. `netdestination "internal" network 172.16.43.0 255.255.255.0 position 1 range 172.16.11.0 172.16.11.16 position 2 ! ip a...
- Question #30
ip access-list session anewone user network 10.1.1.0 255.255.255.0 any permit user host 10.1.1.1 host 10.2.2.2 any deny A user sends a frame with the following attributes: `Source...
- Question #31
Referring to the above portion of a Mobility Controller configuration file, what can you conclude? (Choose all of the correct answers.) `ip access-list session anewone user network...
- Question #32
As a user moves through the authentication process, which of the following is not used in a derivation rule?
- Question #33
Other than a user role, what attribute can be applied to a user with a derivation rule?
- Question #34
Which is an Aruba specific DSA that can be used in a user derivation rule?
- Question #35
Which match condition can be used by a server derivation rule?
- Question #37
View the Server group screen shot above. A company has provisioned the same VAP, AAA and SSID profiles at both its Miami and NY offices. This Server Group is applied for 802.1x aut...
- Question #38
View the Server group and User Roles screen shots above. A user associated to an SSID with 802.1x using this server group. RadiusNY returned a standard radius attribute of filter-l...
- Question #39
View the Server group and User Roles screen shots above. A user associated to an SSID with 802.1x using this server group. RadiusNY returned a standard radius attribute of filter-l...
- Question #40
Which profiles are required in an AP Group to enable an SSID with VLAN 1, WPA2 and LMSIP?
- Question #41
A user connected to a Captive Portal VAP successfully. When the user opens their browser and tries to access their homepage, they get redirected as expected to another URL on the A...
- Question #42
A customer has configured a 3000 controller with the following commands: Vlan 55 Vlan 56 Vlan 57 interface gigabitethernet 1/0 switchport mode trunk switchport trunk native vlan 55...
- Question #43
A customer has a remote AP deployment, where each remote AP has an IPSEC VPN tunnel with L2TP to the controller. 1 of the remote APs is stuck in the user table and hasn't yet trans...
- Question #44
The screen captures above show the 802.1X authentication profile and AAA profile settings for a VAP. If machine authentication passes and user authentication fails, which role will...
- Question #45
What cannot be configured from the Initial Configuration wizards?
- Question #46
When you create a WLAN SSID in the WLAN/LAN wizard what AP group is it automatically added to?
- Question #47
The reusable wizards are accessible in which one of the following ways?
- Question #48
What additional fields must be configured in the configuration wizard if the controller role is selected as a local instead of a standalone controller?
- Question #49
The configuration wizard enables which of the following controller clock configurations?
- Question #50
When configuring ports in the configuration wizard, which of the following are not options for configuration?
- Question #51
What Wizards can be used to create a new AP Group?
- Question #52
By default, which CLI based remote access method is enabled on Aruba controllers?