What should be verified before running the initTM -f command on the Command Line Interface of Avaya BreezeTM platform (formerly known as Engagement Development Platform (EDP))?

Question

Options

• AEnter a password, and click Commit.
• BOpen an SSH session to the Avaya BreezeTM Management Module IP address as sroot.
• COn the command line interface, enter initTM -f.
• DWhen prompted for the enrollment password, enter the password that you provided in Step 9a.
• ERepeat Step 1 to Step 6.

• A
  2% (1)
• B
  77% (34)
• C
  2% (1)
• D
  5% (2)
• E
  14% (6)

Explanation

See step 8 and step 9 below. Repairing replication between Avaya Breeze™ and System Manager 1. On the System Manager web console, navigate to Services > Replication. 2. In Replica Group column, click CollaborationEnvironment_3.1. 3. In Replica Node Host Name column, locate Avaya Breeze™. 4. Verify that the status of the Synchronization Status field is green. If not, go to Step 5. 5. If Presence Services Snap-in has been deployed, in the Product column, verify that both Avaya Breeze™ and Presence Services are displayed. 6. Select Avaya Breeze™, and click Repair. 7. After 2-15 minutes, verify that the status of the Synchronization Status field is green. If not, go 8. Verify that Enrollment Password is not expired. 9. If the Enrollment Password is expired: It is highly recommended that the same password must be used. Otherwise, Avaya Breeze™ and Presence Services must be re-administered, because System Manager Enrollment Password was configured during deployment of Avaya Breeze™. https://downloads.avaya.com/css/P8/documents/101013646

No community discussion yet for this question.